Farm Retirement for Novacek Inc., (Wilbur Novacek), Owner

Auction in 34586 130th St NW, Warren Minnesota, United States

30 Tuesday
October 30th, 2018 10:00 AM
Resource Auction
Phone: 701-757-4015

Farm Retirement for Novacek Inc., (Wilbur Novacek), Owner

Auction in 34586 130th St NW, Warren Minnesota, United States

Tuesday at - 30th October , 2018

Map

Close

Location has been calculated by address and may not be 100% accurate.

Auction Items For Sale

FARM RETIREMENT AUCTION

TUESDAY, OCTOBER 30, 2018 – 10:00 AM

LOCATION: 34586 130th ST NW, Warren, MN; Driving Directions From Sherack, Minnesota- 3 miles north on County Road 20 & ½ mile west on 130th Street; or from Jct County Road 20 & 23 East of Tabor, MN- 1 mile south on County Road 20 & ½ mile west on 130th Street

AUCTIONEER’S NOTE: Wilbur has retired from farming. There are very few small items on this auction.  Auction will go quickly!!

ONLINE BIDDING: Register in advance by visiting www.resourceauction.com

LOAD OUT INFORMATION: Load out assistance will be available sale day until 6PM, Wednesday, October 31 8AM to 5 PM and Thursday, November 1st 8 AM to 5 PM only! All items must be removed by November 13th.

 

TRACTORS & LOADERS:

*2010 Case IH 215 Magnum MFWD, power shift, 3pt w/ quick hitch, PTO, 5 hyd w/ power beyond, front weights, 320/85R38 front tires, 320/09R54 rear duals, partial guidance including WAAS receiver & NavII controller, only 1590 hrs, single owner, SN#Z8RZ05563

*1997 Caterpillar 85C belted ag tractor, power shift, 4 hyd, HD swinging drawbar, 30” belts, decent rubber,  JD 200 ATU steering wheel kit, 6748 hrs, SN#9TK01576

*1989 Case IH 7120 MFWD, power shift, 3pt, PTO, 3 hyd, 14.9-30 fronts, 14.9-46 rears, sells with Leon 808 quick attach loader, 7416 hrs, SN#JJA0009163

*1976 Case 1070 Tractor, CAH, power shift, 3pt, 540/ 1000 PTO, 18.4-38 rear tires, 7690 hrs, SN#8800924

*1970 JD 4620 diesel tractor, cab, side console hyd, 8 spd synchro, 3 hyd, 3pt, PTO,  18.4-38 rear tires, 8420 hrs showing & JD 158 loader w/ 8’ bkt, SN#016690R

 

COMBINE & HEADS:

*1988 Case IH 1680 Axial Flow combine, edible bean leg, chopper, feeder reverse, F/A, HHC, 30.5-32 drive tires, 4519 engine hrs, SN#019154

*Cressoni 6R30 chopping corn head, knife rolls, hyd deck plates, double drive, red poly & CASE IH 1600-2300 adapter, SN#63064805

*Case IH 1010 30’ rigid head, 3” cut, F/A, batt reel, SN#000769

*Crary 30’ air bar system

*Case IH 1020 30’ flex head, 3” cut, F/A, finger reel, SN#JJC0040642

*Case IH 1015 pkp platform, 7 belt pkp, SN#003515

*IHC 810 20’ rigid head w/ Bonco sunflower attachment & drum reel

 

HAYING & LIVESTOCK EQUIPMENT:

*Case IH 8590 4x4x8 square baler, twine tie, auto lube, knotter cooler, 28L-26 tires, 1000 PTO & cab control, SN#CFH0139701

*New Holland 1475 14’ haybine, 2300 series cutting head, 1000 PTO, SN#666179

*2) New Holland side delivery rakes- LH & RH delivery

*JD 660 tandem axle chain bed manure spreader, single rear beater, no gate, 1000 PTO

*Heavy grapple fork attachment

 

TILLAGE & PLANTING EQUIPMENT:

*JD 985 65’ field cultivator, 5 section fold, walking tandems around, wing gauge wheels, single point depth control, no harrow

*Friggstad CD5-52 52’ spring std chisel plow, 5 section fold, walking tandems around, castering wing gauge wheels, no harrow

*Summers/ Herman 70’ Super Weeder, 3 rank hyd retractable Danish tines, 5 bar harrows ( good teeth),  flex wing carrier

*Wilrich 2500 54’ field cultivator, 5 section fold, walking tandems around, wing gauge wheels & 3 bar harrow

*Wilrich 28’ chisel plow, 3 section fold, walking tandems, no harrow

*DMI Tiger II 7 shank ripper w/ front disks & rear leveler bar

*JD 7100 12R30 mounted planter w/ lift assist, 1.6BU boxes, markers & monitor

*Small stiff shank cultivator & older manual lift chisel plow

*JD 14’ tandem disk

*Field Master 50’ diamond tooth hyd drag

*Brillion 12R30 danish tine cultivator

*MF model  40 18’ offset disk, dual wheel carrier, 9” spacing

*IHC 100 28’ (2-14) 7” press drills w/ dry fert, grass seeders & rubber press

*JD 1100 21’ 3pt cultivator w/ 3 bar harrow


SCRAPERS & MOTOR GRADER:

*Caterpillar #80 20 yd scraper, hyd conversion

*Ashland 1000D 10 yd clam style field scraper, SN#11138

*Galion model 870C motor grader, 14.00R24 tires, 6 spd torque convertor trans, 3 spd reverse, tilt and crab steering, cab w/ air, 14’ moldboard, runs and works but may need some trans repair, SN#6780033U203141

*V plow & moldboard wing attachments for motor grader

*United Farm Tools 3pt PTO rotary ditcher

 

TRUCKS & TRAILERS:

*1975 Chev C-80 tandem twin screw truck, v-8, 5/3 trans, 10.00-20 ruvver on Dayton wheels, 20’ steel box & hoist

*Older Wilson 40’ hopper bottom trailer w/ tandem axle convertor dolly

*Older Timpte 40’ alum hopper bottom trailer

*1989 GMC 1500 4×4 pickup, 6.2L diesel, aut trans, PWL, A/C, fuel service unit, 186615 miles showing

*Pkp box trailer

*Single axle truck frame trailer w/ poly water tank & pump

 

GRAIN HANDLING EQUIPMENT, GRAIN CART & SWATHERS:

*M&W 4800A grain cart, folding auger, 1000 PTO, 18.4-26 tires

*JD 2320 self propelled swather, cab w/ air, gas engine, 20’ draper platform w/ finger & batt reels, SN#554245

*Case IH 730 30’ auto fold pull type swather w/ batt reel

*Walinga 510 std  5” 1000 RPM grain vac w/ tubes, hoses & clean up kit, SN#MT510STD92034924

*Alloway 1410 10 x 70 auger w/ mech drive swing hopper

*Westgo 10 x 70 auger w/ hyd drive swing hopper

*Tri-Steel 8” x 30’ tube conveyor

*Tri-Steel jump conveyor, 30” x 8’ hopper, 6’ leg, 3 hp single phase elec motor

*Versatile 8 x 56 PTO auger

 

OTHER EQUIPMENT:

*Late model Woods S22CD stalk shredder, 22’ pull type unit, removable extension for mature crop weed clipping, 1000 PTO, used very little

*Mobility 6T dry fert spin spreader, 540 PTO, unloading auger, 16.5L-16 floatation tires, kept indoors

*140’ self propelled air assist sprayer w/ older Marflex booms, 1000 gal tank, self contained unit mounted on Gleaner N7 combine chassis

*Erskine 8’ 3pt double auger two stage snow blower, 540 PTO

*Melroe 115 spray coupe, cab, tank & booms- needs carb repair

*Enclosed welding/ tool trailer w/ Lincoln arc welder, Magna Force air compressor & bolt bins

*JD 20’ double bat wing rotary mower

*3pt tool bar w/ markers

*Older bin dryer unit

*Gandy air applicator for 30” rows

*640 gal fuel transfer trailer w/ gas engine pump

*Assortment of spare equipment and general farm tires & rims

*A small amount of farm misc.

 

NOVACEK, INC., OWNER  (Wilbur Novacek)

For more information call Auction Office at 701-757-4015

TERMS: Cash, cashier’s check, wire transfer, approved check in US funds.  All sales final.  Statements made auction day take precedence over all advertising.  Document fee on vehicle titles will apply & vehicle titles will be mailed to buyers. 

Canadian buyers are always welcome.  Please furnish a letter of credit for registration. Some purchases require payment by wire. Most units move easily across the border, feel free to ask in advance for document assistance if necessary.

AUCTIONEERS & CLERK: Resource Auction, Dennis Biliske- Auctioneer, 2702 17th Ave S, Grand Forks, ND 58201, ph 701-757-4015, fax 701-757-4016, Dennis Biliske ND Lic 237, ND Clerk Lic 624, email- info@resourceauction.com, website- www.resourceauction.com