ELY, KAWISHIWI TRAIL ESTATE DO-BID ONLINE AUCTION

Auction in 762 KAWISHIWI TRAIL, Ely, Minnesota, United States

31 Monday
31st August, 2020 6:00 PM

ELY, KAWISHIWI TRAIL ESTATE DO-BID ONLINE AUCTION

Auction in 762 KAWISHIWI TRAIL, Ely Minnesota, United States

Monday at - 31st August , 2020

Notes

See website for this auction's specific terms, pickup, viewing and payment instructions. Thank you.

Description

THIS UNIQUE ESTATE FEATURES 2 WILLY'S COLLECTIBLE JEEPS, A 1951 CHEVROLET DUMP TRUCK, AN ALLIS-CHALMERS TRACTOR WITH SNOW PLOW AND ATTACHMENTS, OUTDOOR EQUIPMENT, BOATS AND CANOES, HOMEMADE TRAILERS, SLEIGH AND HORSE TACK, SHOP TOOLS AND EQUIPMENT, T

THIS UNIQUE ESTATE FEATURES 2 WILLY'S COLLECTIBLE JEEPS, A 1951 CHEVROLET DUMP TRUCK, AN ALLIS-CHALMERS TRACTOR WITH SNOW PLOW AND ATTACHMENTS, OUTDOOR EQUIPMENT, BOATS AND CANOES, HOMEMADE TRAILERS, SLEIGH AND HORSE TACK, SHOP TOOLS AND EQUIPMENT, TAXIDERMY, LEATHER JACKETS AND HARLEY-DAVIDSON CLOTHING, COMPOUND BOW, ARROWS, FISHING LURES, TRAPS, HOUSEHOLD AND ANTIQUES! BE SURE TO BROWSE ALL PAGES - THERE ARE TREASURES TO BE FOUND!

 

1. 1963 WILLY'S JEEP 4X4 PICKUP
SERIAL# 5527811085
GVW: 6,000 lbs.
LICENSE: WILLYS - COLLECTOR PLATE
MILEAGE: 62,937
ENGINE: 6 CYL. 230 TORNADO
TRANSMISSION: 4 SPEED MANUAL HIGH/LOW
BLOCK HEATER
SEATS 3
1-7/8" BALL HITCH
WOOD SIDE & HEAD RAILS
4-WHEEL DRIVE

LOTS OF NEW PARTS!
  • MUFFLER
  • BELTS
  • HOSES
  • SHOCKS
  • BRAKES
  • AIR CLEANER
  • VALVE COVERS
  • HUBS
  • REBUILT TRANSMISSION
  • U-JOINTS
  • DRIVE SHAFT

RESTORATION WELL ON IT'S WAY AND READY FOR PAINT!! SOLID BODY, DIAMOND PLATE BED & TOOLBOX, GOOD RUBBER ON 245/75/16 KELLY SAFARI AWR TIRES.  RUNS, DRIVES AND WAS DRIVEN

THIS VEHICLE HAS A REASONABLE RESERVE AND A MOTIVATED SELLER, IT WOULD BE WISE TO BE THE HIGH BIDDER!

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: $35.00 for non-Collector Plates; If buyer qualifies for Collector plates: No Fee; Plate Fee: $8.00 Non-collector or $12.50 Collector; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:
  • NEW INSURANCE CARD (for this vehicle)
Or you may provide all three of the following:
  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE

.


2. 1949 WILLYS JEEP 4X4 TRUCK
SERIAL# 57548 154970
MILEAGE: 12,761
ENGINE: 4 CYLINDER
TRANSMISSION: 4-SPEED MANUAL
1-7/8" BALL HITCH
SEATS 2
4-WHEEL DRIVE

THIS WILLY'S IS A CLASSIC COLLECTOR - RUNS, DRIVES AND WAS DRIVEN!

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: $35.00 for non-Collector Plates Collector Fees will differ; Plate Fee: $8.00 Non-collector; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:
  • NEW INSURANCE CARD (for this vehicle)
Or you may provide all three of the following:
  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE



3. 1951 CHEVROLET 6400 DUMP TRUCK
SERIAL# 21SW-E 3085
GVW: 16,000 lbs.
LICENSE: 98019 EXP: 1985
MILEAGE: 67,350
ENGINE: 6 CYLINDER
TRANSMISSION: 5-SPEED MANUAL
SEATS 3
MUD FLAPS

THIS DUMP TRUCK HAS NO BRAKES AND WILL NEED TO BE TOWED/HAULED, BATTERY IS WEAK BUT WILL JUMP START.  RUNS, DRIVES AND WAS DRIVEN!

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: To be determined by buyer's use; Plate Fee: $8.00 ; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:
  • NEW INSURANCE CARD (for this vehicle)
Or you may provide all three of the following:
  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE



4. 1951 MODEL B ALLIS-CHALMERS WITH 84" SNOW PLOW, HOMEMADE PLOW MOUNT AND SAW ATTACHMENT WITH 27.5" BLADE.  BLADE, BELTS AND DRIVE SHAFT NOT CONNECTED TO FRAME
67" LONG X 43"WIDE


4B. HOMEMADE ROCK BOAT 71"L X 44"W

4C. 3 HOMEMADE DRAGS 64"W X 96" L AND 70"W X 47"L AND 36"L X 9.5"W

4D. SPRING TOOTH DRAG 64"W X 60"L

5. 1994 ALUMACRAFT BOAT AND TRAILER PACKAGE

BOAT:
Year: 1994
Make/Model: Alumacraft
Length: 14 Foot
Body Style: Jon Boat
VIN: ACBF4161H394
Registration# MN8730GS Exp: Dec. 31, 2019
Load Capacity: 885lbs.
Motor capacity: 25hp
Seats 5 passengers
-Includes anchor and oars

TRAILER:
Length: 16 Foot
Style: Tilt Boat Trailer
License: AALU872 Exp: Permanent
Tire Size: 4.80-12
Hitch: 1-7/8"
Light Plug: None will need to be wired.
-tongue, jack & spare tire.

Additional Fees Charged on Invoice: Documentation Fee: $45.00; State Sales Tax 8.375% tax on boat
NOT ON INVOICE Additional Fees that will be charged at Pickup/Titling: Filing fee: $11.00; Transfer fee $3.00; State Sales Tax is 6.5 % of final purchase price on trailer and trailer value will be 20% of the final purchase price. Boat is $13.00 to transfer or $41.60 to transfer and renew



 

6. 18 FOOT LONG ALUMINUM CANOE WITH 2 PADDLES, SMALL FIXABLE LEAK

Additional Fees Charged on Invoice: Documentation Fee: $25.00; State Sales Tax 8.375% tax on boat
NOT ON INVOICE Additional Fees that will be charged at Pickup/Titling:  Boat is $13.00 to transfer or $34.10 to transfer and renew


7. 1974 HOMEMADE BOX TRAILER
VIN# G425700
BOX SIZE 84"L X 53"W
TIRES NEED REPLACEMENT, SIZE H-78-15
1-7/8" BALL

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: $55.00; Plate Fee: $2.50; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:
  • NEW INSURANCE CARD (for this vehicle)
Or you may provide all three of the following:
  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE


8. HOMEMADE TRAILER WILL NEED A BED, BED SIZE IS 120" L X 65.75"W. 2" BALL REQUIRED - NO TITLE

9. VINTAGE CUTTER SLEIGH WITH RED VINYL COVERD SEATS AND RED ACCENTS
MADE BY LULL CARRIAGE CO. OF KALAMAZOO, MICH.
HAS CURVED METAL RUNNERS AND WOODEN FRAME
INCLUDES BUGGY HAME
DOOR PANELS ARE INCLUDED BUT NOT ATTACHED
SOME DAMAGE TO SEAT COVER
REAR OF SLEIGH NEEDS WOOD REPAIR
72" LONG X 42" X 47"
ALSO 2 SETS OF JINGLE BELLS INCLUDED!
(PLEASE SEE PICTURES OF DAMAGE TO REAR WOODEN PANEL)

10. FISH HOUSE ANGLING/ SPEARING WITH  SLEIGH W/ RUNNERS.  HOUSE IS IN  2 HALFS FOR HAULING ON THE SLEIGH TO SETUP,  HOUSE IS 6' X 8'  2 HOLES EA. CAN BE EITHER ANGLE OR SPEARING. HAS LP HEATER 

11. A CAMPBELL-HAUSFELD INDUSTRIAL AIR COMPRESSOR, MODEL #: L141DT. REGULATOR WITH GAUGE, COMES WITH (3)-HOSE REELS, HOSES AND ACCESSORIES, A BINKS FILTER WITH GAUGE, EXTRA BINKS NOZZLE AND EXTRA REGULATOR. IT WILL BE THE WINNING BIDDERS RESPONSIBILITY TO DISCONNECT THE POWER TO UNIT AND TO MOVE AND LOAD AS AUCTION STAFF WILL NOT BE ABLE TO ASSIST

12. A KLUTCH INVERTER POWERED MIG 140 Si PORTABLE DC INVERTER WIRE FEED WELDER. COMES WITH AN ARGON TANK WITH GAUGES.

13. EX-CELL PRESSURE WAVE 2400 PSI 6.5 HP PRESSURE WASHER. POWERED BY HONDA ENGINES GX SERIES COMMERCIAL. MODEL #: 2403 CWH.

14. SEARS CRAFTSMAN 15" DRILL PRESS
MODEL# C63FRL4229; PART# 817557
5/8" CHUCK
12-SPEED
250-3100 RPM
120 VOLT
8.0 AMP
1725 RPM
60HZ
 

15. JOHNSON 15 HP MOTOR. MODEL #: J15RE0D. IN GOOD CONDITION. TURNED OVER, GOOD COMPRESSION. COMES WITH STAND, GAS TANK, FUEL LINE AND MOTOR FLUSHER.

16. CRAFTSMAN RADIAL 100-10" ACCRA-ARM RADIAL ARM SAW, MODEL#: 113.29440. TESTED AND WORKING. COMES WITH METAL STAND AND HOSE.

17. CRAFTSMAN MOTORCYCLE/ATV HYDRAULIC JACK, CAPACITY 1500 POUNDS. MODEL #: 9-50190.

18. BEAR SKIN RUG. LENGTH OF THE SKIN FROM FRONT PAW TO FRONT PAW IS 49"-LENGTH OF SKIN FROM NOSE TO PAW IS 59"

19. BEAR CUB MOUNT IN A TREE HOLDING STANCE. LENGTH OF CUB IS 25"

20. ADULT FOX MOUNT STANDING ON A PIECE OF DRIFTWOOD. PIECE MEASURES 29" X 21"

21. TROY BUILT ROTO TILLER
MODEL# 171432
7hp BRIGGS & STRATTON MOTOR

22. MONTGOMERY WARD COMPOST GRINDER
MODEL# GIL21326A
5HP BRIGGS & STRATTON MOTOR

23. NEPTUNE TROLLING MOTOR WITH EXTRA PROP, MODEL WC1 SERIAL C1353RU, METAL PROP IN GOOD CONDITION, UNKNOWN OVERALL WORKING CONDITION

24. 325 GALLON PLASTIC WATER TANK

25. VINTAGE FIRE HYDRANT MADE BY EDDY VALVE CO. 51" TALL

26. THIS LOT INCLUDES FIRE POKER, COPPER BAR, REBAR, HI-LIFT JACK WITH ADDITIONAL BAR

27. LARGE SHOP BROOM, GOOD CONDITION

27A. TIRE IRON, SLEDGE HAMMER, EXTRA HEAD FOR SLEDGE HAMMER AND 60"

28. (3) ORGANIZERS INCLUDING VARIOUS SCREWS, FITTINGS, SOME ELECTRICAL, NUTS & BOLTS, BRASS RIVETS AND MUCH MORE. SMALLEST MEASURES 12 1/2" X 6" X 6" HIGH, NEXT UNIT MEASURES 12 1/2" X 6" X 14", LARGEST ORGANIZER IS 15" X 6 1/2" X 18 1/2". PLEASE NOTE THAT THE SMALLEST ORGANIZER HAS A LOOSE TOP AND SOME OF THE DRAWERS HAVE CRACKS

29. (2) STACKABLE ORGANIZERS WITH VARIOUS PARTS, MISC NUTS & BOLTS, WASHERS & MORE - BOTH MEASURE 20" X 6 1/2" X 10" HIGH AND STICK (20" TOTAL)

30. TWO-MAN VINTAGE LOGGING SAW, WOOD HANDLES, OVERALL LENGTH IS 60"

31. (3) BOXES OF STICK MATCHES, GAPS & CRACKS, STARTING FLUID, ELITE RED MULTI-PURPOSE HEAVY LOAD GREASE, MARVEL MYSTERY OIL AND MORE!!!

32. THIS LOT INCLUDES MULTIPLE SCREWDRIVERS, CHALK LINE, SCRAPERS AND MORE!

33. VINTAGE PING PONG TABLE MEASURING 109" LONG X 60" X 29" HIGH, COMES WITH NET AND HARDWARE AND (4) PADDLES

34. LARGE AMOUNT OF VINTAGE WOOD RASPS, SOME WITH METAL HANDLES (2) WITH WOOD HANDLES

35. LARGE AMOUNT OF VINTAGE WOOD RASPS, SOME WITH METAL HANDLES WITH WOOD HANDLES

36. BENCH VISE, 6" JAW - WINNING BIDDER WILL BE RESPONSIBLE FOR REMOVING THE VISE FROM THE TABLE

37. STEEL PLATES - LARGEST PLATE IS 1' X 1' X 5/8" THICK AND OTHER SMALLER PIECES

38. HEAVY DUTY MILWAUEE SANDER MODEL # 6065 - 9"

39. BLACK & DECKER INDUSTRIAL POLISHER WITH BOTTLES OF MIRROR GLAZE, FILL 'N GLAZE AND MORE

40. RICH LINE MODEL 702 POP RIVET GUN IN CASE, RATCHET STRAPS AND DIAMOND ALLOY WRENCH MEASURING 12" LONG, ALSO RICHLINE TEXTRON 202 RIVETER

41. VINTAGE WOOD PLANER, HAND CRANK DRILL, SMALL HATCHET WITH LEATHER SHEATH, STANLEY LEATHER TOOL BELT PARTS, RATCHET STRAPS

42. (3) BUCKETS FILLED WITH MISC STEEL, CHAIN AND PARTS - SEE ALL PICTURES

43. WOOD BENCH WITH ONE SHELF MEASURES 73 1/2" X 25" X 38"-DOES NOT INCLUDE ITEMS ON SHELF

44. PYLE PTAU45 STEREO POWER AMPLIFIER SET UP FOR SERIUS XM WITH USB / CD - SERIUS ANTENNA ONYX EZ MODEL XEZ1 - SPEAKERS INCLUDED ARE RCA MODEL # RTD325W, (2) KLH 9113. IT WILL BE THE WINNING BIDDERS RESPONSIBILITY TO DISCONNECT AND REMOVE

45. METAL CABINET WITH ROUNDED CORNERS - 5 SHELVES - MEASURES APPROXIMATELY 24" X 11 1/2" X 64" - DOES NOT INCLUDE ITEMS LOCATED IN CABINET

46. METAL TOOL CABINET - 8 DRAWER AND FOLD OVER TOP - MEASURES 26" X 16" X 17 1/2" - INCLUDES BALL HITCHES, ELECTRICIANS TAPE, BRUSHES, ELECTRICAL ITEMS AND WIRE AND ALL ITEMS SHOWN - SEE PICTURES

47. LARGE TOOL CABINET ON CASTERS WITH BOTTOM STORAGE AREA AND FOLD OUT AND 6-DRAWERS. GOOD CONDITION. MEASURES APPROXIMATELY 34" X 18" X 37 1/12"

48. METAL TOOL BOX WITH TWO DRAWERS - INCLUDES ITEMS SHOWN - SEE PICTURES, MEASURES 26" X 12" X 9" HIGH

48A. VARIETY OF SPRAY PAINT, RUSTOLEUM, FIBERGLASS RESIN, PARTIAL JUG OF MINERAL SPIRITS, ACRYLLIC LAQUER THINNER, CONCRETE BONDING ADHESIVE AND MUCH MORE USED FOR BODY WORK - SEE PICTURES�.ALL ITEMS LOCATED IN CABINET!

49. METAL BENDIX TOOL BOX WITH LOCKING KEY, 4 SHELVES, NOT ON CASTERS - MEASURES 33" X 12" X 36"

50. BINKS WREN AIRBRUSH KIT WITH ACCESSORIES SHOWN AND PAPERWORK

51. STEEL BOX INCLUDING PNEUMATIC AIR TOOLS INCLUDING SIOUX, EVERCRAFT GRINDER, INGERSOLL RAND DRILL AND MORE

52. LARGE GROUP OF TOOLS FOR BODYWORK, SEE ALL PICTURES

53. BIG GROUP OF CHISELS AND PUNCHES INCLUDING CRAFTSMAN, DAVIES AND MORE - VARYING SIZES - SEE PICTURES FOR MEASUREMENTS

54. COPPER HEAD MALLET AND TACK HAMMERS

55. VINTAGE METAL LITTLE DEVIL CRAFTSMAN TOOLBOX FULL OF SK, CRAFTSMAN, MAC WRENCHES WITH LIFT OUT DRAWER, PRYBARS. MEASURES 19 1/2" X 6 1/2" DEEP X 7" HIGH

56. THIS LOT INCLUDES CRAFTSMAN 60-PC MECHANICS TOOL SET, MISC US MADE SOCKETS AND STARRETT AND LAWSON GAUGES

57. GROUP OF DRAW KNIVES AND HOOKS FROM A LOG TURNING / PULLING TOOL

58. METAL BOX INCLUDES SOME HOOKS AND CHAINS, METAL BRACKETS AND MORE. RED METAL BOX INCLUDES LARGE BOLTS AND ALL ITEMS SHOWN IN PICTURES

59. LOT INCLUDES SNIPPERS, SCISSORS, SIDE CUTTERS AND VARIOUS CUTTING TOOLS. ONE IS DIAMALLOY - VERY INTERESTING GROUP OF TOOLS!

60. METAL TOOL BOX INCLUDING ALL CRAFTSMAN 1/2" DRIVE STANDARD SOCKETS, EXTENSIONS AND MORE!

61. 1/4" SK SOCKET SET, CRAFTSMAN EXTENSION, TWO SETS OF MAC STANDARD SOCKETS 3/8 DRIVE SOCKETS

62. SMALL METAL BOX WITH MINIATURE WRENCHES INCLUDING PROTO, SK, FILSON AND MORE. (2) SMALL CRAFTSMAN RATCHETS 1/4" AND THE LARGER METAL BOX CONTAINS A MIX OF CRAFTSMAN, MAC, SK AND MORE

63. MORGAN NOKKER DENT PULLING TOOL, MEASURES 32" LONG

64. AUTO BODY TOOLS, PULLER AND SMALL DRILL MEASURE APPROX 21" LONG

65. LARGE DIAMALLOY ADJUSTABLE PLIERS, CHANNEL LOCK, RIGID HEAVY DUTY PIPE WRENCHES

66. RUBBER MALLOT, 3 BALL PEEN HAMMERS AND A REGULAR HAMMER

67. ALLEN WRENCHES IN VARYING SIZES, SOME QUITE LARGE, PLIERS AND MORE

68. (2)-SQUARES, ONE IS A CRAFTSMAN, SLIDING T-BEVEL BY GREAT NECK, (4)-SAWS, (2)-SMALL SAWS, AND A COPING SAW. COMES WITH A WOODEN BOX WITH A LIFT UP TOP ON CASTORS. 35 1/2" X 11 1/2" X 14 1/2"

69. ONE PIECE OF DIAMOND PLATE. 38" X 16"

70. (2)-WOODEN AND METAL VINTAGE LEVELS, YARD STICKS AND MORE

71. PAIR OF AUTO BODY JACKS. 55" LONG. MISSING HANDLES.

72. (2)- BAR CLAMPS. ONE IS 41 1/2" AND ONE IS 65"

73. (2)-ADULT FOX PELTS

74. (2)-ADULT FOX PELTS

75. (4)-ADULT PINE MARTEN PELTS

76. (2) SMALL ANIMAL PELTS, ONE APPEARS TO BE A FOOT

77. 6-POINT RATTLE ANTLERS AND ADDITIONAL ANTLER (WOULD MAKE A GOOD CHEW TOY FOR A DOG)

78. SPARK PLUG CLEANER, IT WILL BE THE WINNING BIDDERS RESPONSIBILITY TO DISASSEMBLE

79. 18" CRAFTSMAN PIPE WRENCH AND MORE

80. (2)-VINTAGE JACKS

81. (3)-2 TON COME A LONGS.

82. (3)-LONG NECK FUNNELS, HOSE PIECES, BRUSH, TROUBLE LIGHT (TESTED AND WORKING) , OIL FILTER WRENCH AND LED CLIP ON HAT LIGHT. TESTED AND WORKING

83. ONE CRAFTSMAN 24" PIPE WRENCH, ONE TRIMO 24" PIPE WRENCH AND ONE WALWORTH COMPANY 24" PIPE WRENCH

84. 2-TON FLOOR JACK BY A.T.D. HYDRAULICS AND LUG WRENCHES

85. 5 GALLON BUCKET FULL OF SCRAP METAL

86. 3 SPEED METAL FAN BY GE. TESTED AND WORKING. MOUNTED ON A METAL STAND ON CASTORS

87. A MEN'S XL CAMO JACKET BY OUNT'N PRAIRIE, IN GOOD CONDITION

88. (2)- PAIRS OF MEN'S WOOL PANTS BY JOHNSON, APPROXIMATELY 38" X 30." ONE PAIR COMES WITH GENUINE ITALIAN LEATHER BELT AND SUSPENDERS.

89. REVERSIBLE MEN'S DOWN HUNTING VEST. APPEARS TO BE A SIZE LARGE. A MEN'S XXL CAMO COVERALLS WITH A REMOVABLE HOOD

90. A LINCOLN 225 AMP ELECTRIC ARC WELDER. 230 VOLTS. MODEL #: AC-225-S. SITTING ON A STAND WITH CASTORS. 17" X 11" X 24", NOT INCLUDING STAND

91. (2)-WELDING HELMETS AND A PAIR OF WELDING GLOVES

92. AUTO-DARKENING WELDING HELMET BY WEL-BILT, #: ADF 550 AND MORE

93. 4-TIER METAL CABINET ON CASTORS. INCLUDES CONTENTS. 22 1/2" X 15 1/2" X 30 1/2"-DOOR NEEDS LATCH

94. PLASTIC SKELETON. 5 FEET TALL.

95. 4-TIER METAL SHELVING UNIT WITH DOORS THAT LOCK AND COMES WITH A KEY. 4 SMALL SHELVES INSIDE EACH DOOR. 33" X 12" X 29"

96. 3 DRAWER TOOL CABINET ON CASTORS. HAS A BOTTOM SHELF WITH DROP DOWN COVER. INCLUDES WRENCHES, SOCKETS AND MORE. 26" X 17" X 32"

97. DAYTON SINGLE PHASE ELECTRIC GRINDER, 1/3 HP, 115 VOLTS, MOUNTED ON A 9" X 7" TIMBER. MODEL #: S60CXDNW-4613. TESTED AND WORKING.

98. SEARS CRAFTSMAN 3/4 HP BENCH GRINDER-115 VOLTS-7" X 3/4" WHEELS, MODEL #: 257.191.500-MOUNTED ON A METAL PEDESTAL-TESTED AND WORKING. COMES WITH WORK LIGHT.

99. (2)-CLIP ON WORK LIGHTS AND A HALOGEN WORK LIGHT-ALL TESTED AND WORKING. SMALL ASSORTMENT OF LIGHT BULBS AND A PAIR OF CHEMICAL SAFETY GLASSES

100. WELDING TANK STAND ON WHEELS, TO INCLUDE HOSES, GAUGES AND TORCHES. COMES WITH TOTE

101. SET OF HALOGEN WORK LIGHTS ON A STAND-TESTED AND WORKING-NEEDS ONE BULB

102. (3)-BOTTLE JACKS. COMES WITH 2 HANDLES. 2 JACKS ARE UNMARKED. ONE IS A NAPA FLEET MODEL #: 91-229. IT IS A 12 TON JACK WITH A 9"-17 3/4" RANGE

103. 14" ROUND STEEL MARINE CORP WALL PLAQUE. ONE 24" X 36" MARINE CORP FLAG AND ONE 16" X 23" MARINE CORP FLAG

104. ASSORTED NAILS, NUTS, BOLTS AND MORE. SEE PICTURES

105. SPRINGS, PIPE FITTINGS, NAILS, NUTS, BOLTS AND MORE. SEE PICTURES

106. ASSORTMENT OF HINGES AND MORE

107. (3)-TUBES OF ELITE RED HIGH TEMPERATURE LUBRICANT, METAL BOX WITH SPOOLS OF STEEL WIRE, 15 AMP FUSES, WIRE CONNECTORS, DIFFERENT GAUGES OF PRIMARY WIRE AND MORE

108. ONE FULL AND ONE PARTIAL CARBURETOR KIT BY NAPA, #: 2-1402. NAPA ENGINE HEATER FREEZE PLUG #: 605-3180, VARIETY OF OLD GAS CAPS AND MUCH MORE. SEE PICTURES FOR DETAIL

109. SEARS ROUTER-6.5 AMPS. 110-120 VOLTS, MODEL #: 315.17380-TESTED AND WORKING.

110. STIHL 034 CHAINSAW, #: 311Y WITH EXTRA CHAIN AND MORE

111. JONSEREDS 62 COLLECTOR'S CHAINSAW OF SWEDEN. COMES WITH EXTRA CHAINS, NOT FOR THIS SAW AND 2 FUNNELS

112. CRAFTMAN MITER BOX MOUNTED ON A SMALL BOARD

113. (3)-CHICAGO TOOLS TIRE DOLLYS

114. 2 IRWIN QUICK-GRIP ADJUSTABLE CLAMPS AND (2) ADDITIONAL 30" QUICK RELEASE ADJUSTABLE CLAMPS.

115. STURDY WOODEN WORKBENCH MEASURING 48" X 24" X 32"- ITEMS ON BENCH NOT INCLUDED

116. 5 GALLON BUCKET WITH McGUIRE-NICHOLAS CANVAS CARPENTER'S CARRY-ALL, TO INCLUDE ZIP TIES, HAMMER, CAT'S PAW, SCREWDRIVERS, CHISELS OF VARYING SIZES AND MORE

117. STURDY WOODEN WORKBENCH MEASURING 75" LONG X 24" X 36" HIGH - DOES NOT INCLUDE ITEMS ON WORKBENCH

118. DEWALT GRINDER 120 V MODEL # DWE4011 (TESTED AND WORKING), MILWAUKEE 9" HEAVY DUTY SANDER 120V SERIAL # 703-37451 (TESTED & WORKING) AND MISC GRINDING WHEELS IN VARYING SIZES AND EXTENSION CORD

119. MILWAUKEE ELECTRIC DRILL SERIAL # 880C598041666 (TESTED & WORKING) AND LARGE QTY OF GRINDING, SANDING WHEELS AND DREMEL TOOL WITH ACCESSORIES 120V MULTI-PRO MODEL 285

120. MILWAUKEE ELECTRIC DRILL SAW 120V SERIAL # 685-22738 AND BLACK & DECKER CIRCULAR SAW 7 1/4" BLADE SERIAL # 15370 (BOTH TESTED & WORKING, SURGE PROTECTOR AND MORE

121. ELECTRIC MILWAUKEE JIG SAW 120V SERIAL# 749-15579 AND DEWALT ELECTRIC CIRCULAR SAW 7 1/4" MODEL DWE575 AND HEAVY DUTY EXTENSION CORD

122. 6-PC PIPE THREADER SET AND ASSORTED TAPS

123. BLACK & DECKER MOUSE SANDER WITH ADDITIONAL PADS AND BAG (TESTED AND WORKING) AND WRENCHES INCLUDING MOSTLY SK, SOME MAC AND MORE

124. SMALL SLEDGEHAMMER, HAMMER, T-SQUARES, VISE GRIP PLIERS AND MORE

125. THIS ENTIRE LOT IS MAC WRENCHES, PLEASE SEE PICTURES!

126. BANNER BODY REPAIR KIT MODEL #B65114, HAS 4 TON CAPACITY

127. 18V DEWALT DRILL SET COMPLETE WITH BATTERIES AND CHARGER MODEL DC920

128. MILWAUKEE ELECTRIC SUPER SAWZALL IN CASE WITH EXTRA BLADES (TESTED & WORKING) 120V NUMBER 0-2800 SERIAL # 963D300260912, INCLUDES MANUAL

129. THIS LOT INCLUDES CRAFTSMAN SQUARE AND HACKSAWS AND TWO SMALLER SAWS

130. VARIETY OF DRILL BITS AND GLASS CUTTERS - SEE PICTURES

131. THIS LOT INCLUDES TIN SNIPS, SCISSORS, CUTTING TOOLS AND OTHER VARIOUS CUTTING TOOLS - SEE PICTURES

132. LARGE QUANTITY OF SAW BLADES AND THIN RIM SATIN CUT DADO SET - SEE PICTURES

133. LARGE QUANTITY OF SANDING DISCS, ABRASIVE BLADES, GRINDING DISKS

134. HANSON DRILL BIT SET, SPADE BIT SET, ASSORTED DRILL BIT IN VARYING SIZES

135. PARTIAL ROLL OF EVERCOAT EVER MASK MASKING PAPER APPROXIMATELY APPROXIMATELY 36" WIDE

136. LARGE QUANTITY OF ABRASIVE SHEETS, FINE SAND PAPER, 3M COARSE SANDPAPER, SANDING BLOCKS & MORE

137. LARGE LOT OF ASSORTED SCREWS AND LIKE HARDWARE - SEE PICTURES

138. METAL TABLE MEASURING 32" X 18" X 26" HIGH

139. (2) RIDGID PIPE WRENCHES, 14" X 18"

140. 13" WELL POINT & VINTAGE CRAFTSMAN PIPE VISE FOR STEEL PIPE GRIPS 1/8 TO 2 AND BENDS 1/8 TO 3/4"

141. NYE #2 UNIVERSAL ONE WHEEL OR THREE WHEEL PIPE CUTTER 1/8 TO 2" AND MUELLER 1898 PIPE RATCHET REAMER

142. PIPE THREAD COMPOUND, PLUMBERS TAPE, SOLDERING PASTE FLUX, LEAD FREE TINNING FLUX, VISE GRIPS AND ASSORTED PLUMBING TOOLS

143. SMALL PRY BAR, MAGNET EXTENSIONS, 4-1 SCREWDRIVER, EXTENSION MIRROR, LEATHER PUNCH, VISE GRIPS AND MORE

144. 2 WHEEL DOLLY / HAND CART

145. ACE 100' TAPE MEASURE, STANLEY 100' TAPE MEASURE, LUFKIN 50' METAL TAPE (DOES NOT REEL WELL), SPEEDLINE, AND PLUMB BOBS

146. METAL SQUARES, STANLEY PLANER, 3 VINTAGE HOOKS MOUNTED ON METAL AND VARIOUS VINTAGE TOOLS - SEE PICTURES

147. PNEUMATIC AIR TOOLS INCLUDING NATIONAL DETROIT, BLACK & DECKER SANDER, ATCOA VIKING DUAL PISTON SANDER #71973, 80 GRIT SANDPAPER FOR ATCOA SANDER AND MORE

148. PNEUMATIC AIR TOOLS INCLUDING ONE SMALL SANDER AND CP AIR SANDER MODEL CP870

149. ROUND SANDPAPER PIECES 251U - BOXES OF ABRASIVE COATED DISCS BY 3M IN VARYING GRITS (180,220), ROLL OF 3M 316U980 SANDPAPER

150. ACE ELECTRIC DUAL TEMPERATURE HEAT GUN TG-1001, CP AIR TOOL AND METAL BOX WITH TOOLS AS SHOWN IN PICTURES, LOT INCLUDES TWO SMALL HANGING SCALES, BUNGEE CORDS

151. LOT OF HARDWARE INCLUDING BOLTS, NAILS, FASTENERS AND MORE - SEE PICTURES

152. SMALL FIRST AID KIT, BASTER, ANTIFREEZE TESTERS, OIL FILTER WRENCH, DIFFERENT CAULING, PLUMBERS PUTTY, AND METAL STRAPPING AND MORE

153. COMMERCIAL GREASE GUN AND TWO CAULKING GUNS AND MORE

154. WEATHER STRIPPING, ROLLS OF VERY THIN SANDPAPER AND 6 QT STEEL POT WITH VARYING LENGTHS OF LIGHTWEIGHT CHAIN

155. SCREW GRAB, SILICONE RELEASE AGENT, 3-IN-1 MOTOR OIL FOR 1/4 HP, COOL TOOL CUTTING OIL FOR DIFFICULT MACHINING, ANTI-SEIZE LUBRICANT AND MUCH MUCH MORE

156. MUSTANG EMBLEM & LETTERS (INCOMPLETE), TOOL CLEANER, VINTAGE LIGHTS - BIGGER LIGHT READS HEADLAMP 6V, SMALLER TWO LIGHTS READ 12V, (2) 4-WHEEL DRIVE CHROME PIECES, MIRROR, THICK GLASS (CHIPPED)

157. CRAFTSMAN METAL BOX WITH DIFFERENT SIZE HOLE SAWS AND VARIOUS BITS AND CRAFTSMAN 1/2" REVERSIBLE ELECTRIC DRILL MODEL 315.7782 (TESTED & WORING)

158. LISLE MODEL W JEEPERS LO-BOY CREEPER AND NAPA BALKAMP ROLLER CREEPER

159. ROLLER CREEPER EXCELL AND NAPA FLOOR CREEPER

160. SMALL WOODEN WORK TABLE ON CASTERS, MEASURES 37 1/2" X 23 1/2" X 33 1/2" - HAS ONE SHELF AND DOES NOT INCLUDE ITEMS ON THE TABLE

161. BRANDED GARMENTS LEATHER RIDING PANTS SIZE 38 - GOOD CONDITION

162. HARLEY DAVIDSON LEATHER VEST WOMENS LARGE

163. U.S. CHAP & SADDLEBAG LEATHER RIDING CHAPS - WOMENS LARGE

164. U.S. CHAP & SADDLEBAG LEATHER RIDING CHAPS - WOMENS SMALL

165. HARLEY DAVIDSON LEATHER RIDING VEST - MENS LARGE

166. PELLE STUDIO MENS MEDIUM LEATHER JACKET - LINED

167. STREET LEGAL BY BERMAN'S LEATHER MENS SIZE 44 JACKET

168. IMITATION BROWN LEATHER VEST - WOMENS MEDIUM

169. ARTIC CAT HELMET IN ORIGINAL BOX, COMES WITH LINER AND FACE COVER, MODEL FG-5 - SIZE L

170. ARTIC CAT HELMET IN ORIGINAL BOX, MODEL FG-5 WITH LINER AND FACE COVER - SIZE XXL

171. HELMET WITH GENUINE HARLEY DAVIDSON BOX. HELMET READS "GRAMMA" ON IT - 7 3/8" LARGE

172. HARLEY DAVIDSON EASY ACCESS (ZIP SIDE) BOOTS - US SIZE 10 - WOMEN

173. HARLEY ULTIMATE MACHINE BOOK, BIG TWINS, AMERICAN CLASSICS AND BIG BOOK OF HARLEY DAVIDSONS

174. HARLEY DAVIDSON LEATHER BOOTS MENS BOOTS SIZE 11

175. HARLEY DAVIDSON ELECTROGLIDE MODEL - FINE DETAIL - SOME PIECES ARE LOOSE

176. HARLEY DAVIDSON LEATHER BALL CAP (ONE SIZE) AND LEATHER CAPTAINS HAT (SMALL/WOMENS)

177. HARLEY DAVIDSON RAIN JACKET AND PANTS WITH ZIPPERED HARLEY DAVIDSON POUCH - LARGE

178. HARLEY DAVIDSON RAIN JACKET AND PANTS WITH HARLEY DAVIDSON ZIPPERED POUCH - MEDIUM

179. HARLEY DAVIDSON FANNY PACK, STURGIS 2004 BALL CAP & HARLEY DAVIDSON BEAR (SHOWS CONSIDERABLE WEAR)

180. METAL TABLE ON CASTORS WITH BUILT IN SHELF. WAS USED AS A WELDING TABLE. 48" X 24" X 30 1/2"

181. MATHEWS SOLO CAM MACHINED RISER COMPOUND BOW. LENGTH OF 45"-COMES WITH PADDED CAMO CASE WITH MULTIPLE POCKETS AND QUIVER WITH LEATHER STRAP AND (3)-TERMINATOR LITE HUNTER 4560 ARROWS WITH TIPS

181A. (12)-TERMINATOR LITE HUNTER 4560 ARROWS (SOME HAVE FLUORESCENT ARROW NOCKS) AND A TROPHY RIDGE WHISKER BISCUIT REPLACEMENT BISCUIT. IT IS A SIZE MEDIUM-RIGHT HAND FOR USE WITH CARBON ARROWS

182. A UNIQUE VINTAGE HANDMADE ARROW CARRYING BACK PACK WITH SHOULDER STRAP AND ZIPPERED POCKET. MULTIPLE ARROWS INCLUDED.

182A. (4)-BOWS. ONE IS 58", ONE IS 60", AND ONE IS 45"-THE OTHER BOW IS A BEN PEARSON ALL-AMERICAN #7064 BOW MEASURING 61"

183. (4)-VICTOR ANIMAL TRAPS MEASURING 6" ACROSS

184. (4)-VICTOR ANIMAL TRAPS MEASURING 4 1/2" ACROSS

184A. (4)-VICTOR ANIMAL TRAPS MEASURING 6" ACROSS

185. (4)-VICTOR ANIMAL TRAPS MEASURING 6" ACROSS

186. PIECE OF ROPE WITH 2 CLIPS ON THE ENDS, PARTIAL BOTTLE OF FOX HOLLOW'S PREMIUM WHITETAIL DEER URINE, SNAP-ON-TOOLS METRIC ALLEN WRENCHES, 2 SMALL ROUND METAL CONTAINERS AND A SMALL CANVAS CASE AND A LEATHER FLASK WITH CARRY STRAP

187. WICKER BACKPACK BASKET MEASURING 13" X 10" X 16"-ONE RABBIT PELT AND WOODEN PELT STRETCHER BOARDS

188. PLASTIC TACKLE BOX. MISCELLANEOUS FISHING ITEMS IN BOX, TO INCLUDE ZEBCO #33 REEL, FISHING LINE, HOOKS, SINKERS AND MORE.

189. VICTOR VINTAGE METAL TACKLE BOX. MISCELLANEOUS FISHING ITEMS IN BOX, TO INCLUDE BOBBERS, FISHING LINE, JIGS AND MORE.

190. VINTAGE FISHING LURES. SOME ARE MADE OF WOOD. ONE IS AN AIRPLANE LURE, ONE IS A CISCO KID AND ONE IS SHAKESPEARE GENUINE SWIMMING MOUSE.

191. VINTAGE FISHING LURES. SOME ARE MADE OF WOOD. ONE IS A GEORGE PORTER. ONE IS AN ORIGINAL RAPALA WOBBLER.

192. SMALL TUPPERWARE TACKLE BOX STYLE CONTAINER WITH MISCELLANEOUS FISHING ITEMS, SEE PICTURES FOR DETAILS. ADDITIONAL PLASTIC CONTAINER INCLUDES A JITTERBUG, FROG LURE AND MORE AND LOT ALSO INCLUDES MULTIPLE NEW SINKERS, SPINNERS AND MORE.

193. SPEARING DECOYS, APPEAR VINTAGE. (2)-ROPE FISH STRINGERS AND (3)-METAL FISH STRINGERS.

194. AN AMERISTEP G-20 GROUND BLIND WITH CAMO PATTERN. IT WEIGHS 13 POUNDS AND BLIND DIMENSIONS ARE 60" SQUARE X 68" TALL.

195. (2)-METAL MILK CRATES

196. (2)-METAL MILK CRATES

197. (2)-METAL MILK CRATES. ONE IS SLIGHTLY LARGER THAN STANDARD SIZE WITH A METAL BOTTOM PLATE THAT SAYS BRIDGEMAN RUSSELL.

198. PLASTIC CAR-CADDY AND (2)-SIDE VIEW MIRRORS

199. (2)-ICE FISHING RODS AND REELS. ONE VINTAGE ICE FISHING ROD WITH AN HT REEL, FISH NET, HOMEMADE FISH SCALER, A POP-UP BY THE ARCTIC FISHERMAN AND MORE.

200. (2)-ICE FISHING RODS AND (2)-ICE FISHING RODS AND REELS, AND (2)-RODS AND REELS, ONE VINTAGE ROD AND REEL.

201. 48" PLASTIC ROD CARRIER WITH (3)-2 PIECE FISHING RODS.

202. 54" (5)-PRONG FISHING SPEAR

203. 55" (7)-PRONG FISHING SPEAR

204. ELECTRIC PAINT SPRAYER BY WAGNER PAINT CREW PLUS. MODEL #: 0504124.

205. CRAFTSMAN PAINT SPRAYER WITH CANISTER. (2)-BINKS MODEL 7 PAINT SPRAYERS WITH CANISTERS. ONE CANISTER WITH A LID AND ADDITIONAL ATTACHMENTS INSIDE. SMALL BRUSHES, METAL FUNNEL, WAGNER REVERSIBLE SPRAY TIP, #: 0501411, STILL IN THE PACKAGE AND MORE.

206. LARGE LOT CONTAINING PAINT BRUSHES, DROP CLOTHS, PAINT PANS AND EVERYTHING YOU SEE IN PICTURES.

207. EAGLE SUPRAPRO I.D. FISH FINDER WITH ORIGINAL BOX AND MANUAL. SERIAL #: 006540020. NOT TESTED.

208. 8" CORDLESS TRIMMER BY TORO. MODEL #: 51467. COMES WITH MANUAL. TESTED AND WORKING.

209. JONSEREDS GR36 GAS POWERED BRUSH CUTTER. SIX FEET LONG.

210. TECUMSEH TC-II STRIKE MASTER MAG 2000-2 HP ICE AUGER AND A VINTAGE SNABB ICE FISHING AUGER HOLE BORER FROM SWEDEN.

211. THE NEW AND COMPLETE BOOK OF NIGHTCRAWLER SECRETS, UNIQUE STRINGER, SHIMANO R1000 REEL AND A GARCIA REEL.

212. ABU GARCIA CARDINAL MAX 3 FISHING REEL STILL IN ORIGINAL PACKAGING, A STRINGER, ROPE AND MORE.

213. VINTAGE METAL TACKLE BOX BY SIMONSEN METAL PRODUCTS-18 1/2" X 8 1/2" X 10"-BOX CONTAINS REELS, BOBBERS, SINKERS AND MORE.

214. CABELA'S "SECLUSION 3D"  HUNTING CAMO ONE-PIECE SUIT IN SIZE L/REG.  COMES WITH A CAMO BACKPACK.

215. (2)-COLLAPSIBLE METAL SAWHORSES. 38" IN LENGTH AND HEIGHT OF 30"

216. A WELLER SOLDERING GUN, MODEL #: D-550-PK, WELDING CHIPPING HAMMER, SPOOLS OF SOLDERING WIRE, BRAZING FLUX AND PARTIAL SPOOL OF AUTO-LITE AUTOMOTIVE AND AIRCRAFT CABLE.

217. A WEN SOLDERING GUN, MODEL #: 460. COMES WITH OWNER'S MANUAL. A STRIKER, VARIETY OF SOLDERING WIRE, WELDING CHIPPING HAMMER AND MORE.

218. A 10" BRINK & COTTON C-CLAMP. (2)-LARGE 200 MM C-CLAMPS AND A 150 MM C-CLAMP.

219. VARIETY OF LARGE C-CLAMPS. ONE IS A GORDON. MANY DIFFERENT BRANDS.

220. VARIETY OF LARGE C-CLAMPS. ONE IS FROM CINCINNATI TOOL CO.

221. DAYTON BLOWER MOTOR, MODEL #: 1TDT2. HP: 1/10, 115 VOLTS.

222. ONE GALLON PAIL OF HOSE CLAMPS IN VARYING SIZES.

223. VARIETY OF WELDING RODS IN VARIOUS SIZES AND WEIGHTS AND A SMALL SOLDERING BUCKET.

223A. LARGE GROUP OF AIR HOSE FITTINGS.

223B. (2)-STAPLE GUNS WITH EXTRA STAPLES, VINTAGE BOX OF HANSEN TACK POINTS, VINTAGE PLASTIC CORINA LARKS CIGAR BOX WITH EXTRA STAPLES.

224. VARIETY OF VICE GRIPS IN VARIOUS SIZES.

225. BERNZ-O-MATIC TORCH KIT AND VINTAGE WRENCHES. SEE PICTURES.

226. (5)-FLAIR BRAND AUTOMATIC FLOAT TYPE AIR VENTS, MODEL #: VH260301, WIRE BRUSHES, SMALL BLADES, THIN COATED WIRE, GAUGES AND MORE.

227. WORK BENCH VICE. WINNING BIDDER RESPONSIBLE FOR REMOVAL FROM WORK BENCH.

228. TECUMSEH TROY BUILT 10 HP SNOWBLOWER, MODEL #: 42012. RAN LAST WINTER. TURNS OVER-GOOD COMPRESSION.

229. ORIGINAL TIGER FURBY, 7 1/2" VINTAGE METAL CRAWLER, 4 1/2" TONKA CRAWLER DOZER AND MORE.

230. SONY DUAL CASETTE PLAYER WITH ALL CASETTES SHOWN. SEE PICTURES.

231. LARGE CERAMIC STEIN WITH DEER ON IT, A CERAMIC BUCK AND DOE AND A GLASS JAR WITH LID. STEIN MEASURES 16" HIGH. BUCK AND DOE MEASURES 11" HIGH.

232. PICKARD CERAMIC PIECE TO LOOK LIKE A FOUNTAIN AND VARIOUS ADVERTISING TINS, INCLUDING CAMPBELL'S SALT AND PEPPER CREAM CAN TINS, UNEEDA BISCUIT, MORTON SALT, HERSHEYS AND MORE.

233. 1:24 DIE-CAST 1932 FORD COUPE REPLICA (IN ORIGINAL BOX) AND A ERTL 1932 FORD DELIVERY VAN BANK WITH KEY.

234. CERAMIC D�COR INCLUDING 12" INCH HIGH SUNFLOWER AND CARROT, GARLIC AND ASPARAGUS WALL HANGINGS MEASURING 6" X 7 1/2" HIGH. HANGING HARDWARE INCLUDED.

235. A COLLECTION OF CHICKENS AND ROOSTERS IN VARYING STYLES AND COLORS. TALLEST CHICKEN IS 7 1/2."

236. A COLLECTION OF CHICKENS AND ROOSTERS. VARYING STYLES AND COLORS. ONE IS A SALT AND PEPPER SET. SEE PICTURES.

237. COLLECTION OF CHICKENS AND ROOSTERS. VARYING STYLES AND COLORS. TALLEST IS 7." INCLUDES ONE NAUGHTY CHICKEN WHO KEEPS LOOKING OVER THE EDGE OF THE TABLE.

238. SET OF TEN LOW BALL GLASSES WITH BUBBLED BASE AND THEY ALL SAY, "THE BLUE LINE LOUNGE."

239. 14" VINTAGE WINE DECANTER WITH (6)-GLASSES. NEVER USED. 6" HIGH, 6" ROUND CERAMIC CROCK A MAPLE LEAF.

240. CERAMIC GARDEN STAKE MUSHROOMS THAT YOU CAN SET NEXT TO YOUR GARDEN TROLLS. STAKES ARE 16" LONG AND THE HIGHEST MUSHROOM CAP IS 6" HIGH.

241. A PAIR OF BOSE SPEAKERS, MODEL #: 201 SERIES III AND ONE RCA SUB-WOOFER, MODEL #: RTD325W.

242. A LARGE LOT OF TIE DOWNS, RATCHETS AND ROPE.

243. WOODEN DECOR INCLUDING A ROCKING DOLL BENCH THAT IS 16" X 11 1/2" X 13", A WOODEN SPOON HOLDER AND MORE.

244. LARGE COLLECTION OF VINTAGE HATS INCLUDING BUDWEISER BEER HAT, STRAW HATS FROM THE RED HAT SOCIETY AND MORE. SEE PICTURES.

245. ASSORTED DECOR INCLUDING FISHING, NATURE, A TAYLOR THERMOMETER AND MORE. PLEASE NOTE ONE TUSK ON ELEPHANT IS LOOSE.

246. DECOR INCLUDING A GOLD LEAF METAL TREE, A CANDLELIT LAMP WITH A LEAF DESIGNED METAL SHADE AND MORE.

247. PEWTER DECOR INCLUDING A 6" HIGH PITCHER, CHALICE AND A BOWL.

248. A CERAMIC COW THAT IS 8" LONG, A CERAMIC COWBOY BOOT, A VINTAGE WOODEN LADLE, A WOOD AND BARB WIRE WELCOME SIGN AND A COW/FARM LIGHT WEIGHT CREAM CAN.

249. LONG HEAVY CHAIN, HARDENED METAL. KUPLEX HOOKS EACH END.

250. (2)-COME-A-LONGS

251. LONG CHAIN WITH HOOKS ON BOTH ENDS AND CHAIN TIGHTENERS.

252. (2)-HEAVY CHAINS AND A SET OF TIRE CHAINS.

253. A 5 GALLON BUCKET CONTAINING LONG HEAVY HARDENED CHAIN AND ASSORTED SMALL CHAINS.

254. A VINTAGE MIRRORED HORSE COLLAR MEASURING APPROXIMATELY 20" X 28" HIGH. VERY UNIQUE PIECE. MIRROR IS IN GOOD CONDITION BUT HAS A SMALL SECTION MISSING AT THE TOP. SEE PICTURES.

255. A LARGE LOT OF TARPS AND COVERINGS.

256. THIS LOT INCLUDES (3)-LONG HEAVY BRAIDED TOW ROPES. ONE HAS HOOKS ON BOTH ENDS.

257. WIRE UNDERLAYMENT MESH USED FOR SLATE ROCK. MEASURES 97" X 28"

258. THIS LOT INCLUDES PIECES OF PLYWOOD. LARGEST PIECE MEASURES 72" X 35."

259. VINTAGE CAST IRON BATHTUB 60"L X 30"W

260. ASSORTED SIZES OF METAL SHEETING FOR ROOF OR SIDING 38"W X 144" LONG DOWN TO 36"LONG

261. ASSORTED CONCRETE BLOCK AND PATIO BRICKS

262. (2) 30 GALLON METAL TRASH CANS WITH LIDS

263. (3) 3" X 12" MAPLE SLABS, (4) 3" X 9-3/4" MAPLE SLAB 101" LONG

264. LARGE VERY HEAVY DUMBBELL, APPEARS VINTAGE AND 18" ACROSS

265. LARGE ASSORTMENT OF CEMENT FINISHING TOOLS TO INCLUDE TROWELS, EDGER'S AND MORE

266. (2) 5 GALLON METAL BUCKET TO INCLUDE A SQUARE SHOVEL, HAMMERS, SMALL SLEDGE HAMMERS, CEMENT FINISHING TOOLS AND MORE

267. MONTGOMERY WARD CEMENT MIXER WITH ELECTRIC MOTOR (SERIAL# 557) 37" X 27" X 41"

268. 8 SECTIONS OF METAL SCAFFOLDING WITH BRACES, 1/2 A 5 GALLON METAL BUCKET OF EXTENSION PINS AND WOOD PLANKS FOR SCAFFOLDING AND SHORT PIECE OF A WOODEN LADDER

269. LARGE GROUP OF VINTAGE LEATHER STRAPS, HARNESSES AND HAIM'S - SHOWS CONSIDERABLE WEAR.

270. LARGE WOODEN BOX FULL OF PARTS FOR ELECTRIC FENCE, BOX IS 70"W X 19" X 20.5"

271. BUTT LINE, LONG LEAD, ROPE LEAD AND WHIP

272. TEAM HARNESS INCLUDING 2 HAIM'S, 2 COLLARS AND LARGE AMOUNT OF STRAPS AND MORE - SHOWS CONSIDERABLE WEAR.

274. 3 METAL PELT STRETCHERS

275. 3 METAL PELT STRETCHERS

276. LARGE HARNESS AND EXTRA STRAPS

277. 4 HEAVY STRAPS

278. GROUP OF VINTAGE HORSE BITS

279. SMALL HARNESSES

280. BRIDLES WITH BLINDS

281. BRIDLES WITH BITS, ONE HAS BLINDS

282. GROUP OF VINTAGE BRIDLES

283. GROUP OF VINTAGE BRIDLES

284. VINTAGE BRIDLE WITH BIT AND REINS

285. GROUP OF HORSE GROOMING TOOLS

286. SMALL PIECES OF LEATHER STRAPS AND A VARIETY OF TACK FITTINGS

287. VINTAGE HORSESHOES 4 ARE 3.5" X 4" AND 4 ARE 5" X 5", ONE IS 5" X 6"

288. SET OF HAIM'S, MADE OF METAL AND WOOD

289. SET OF VINTAGE HAIM'S, MADE OF METAL AND WOOD

290. PAIR OF 21" YOKES

291. PAIR OF 30" YOKES

292. SHORT PIECES OF CHAIN WITH "T" HOOK ENDS

293. 2 YOKES. ONE IS 34-1/2" AND ONE IS 36"

294. 3 YOKES. ONE IS 31" LONG AND ONE IS 40" LONG AND ONE IS 44" LONG

295. 12" WESTERN SADDLE - SEE PICTURES FOR DETAIL & DESIGN

296. 12" WESTERN SADDLE - SEE PICTURES FOR DETAIL & DESIGN

297. 14" WESTERN SADDLE - SEE PICUTRES FOR DETAILS & DESIGN

298. ANTIQUE METAL GRATE MEASURING 26" X 33.5"

299. HOMEMADE PULL-BEHIND EARTH BREAKER - NO WHEELS 33" X 38"

300. 1/2" CHAIN - 20 FEET LONG WITH HOOKS

301. 3 PIECES OF 1/2" CHAIN. ALL PIECES OF CHAIN ARE 63" LONG. ONE FORMS A "V" WITH 2 CONNECTORS, ONE HAS A HOOK ON THE END AND ONE HAS A NUT-BOLT-WASHER ON THE END.

302. 2 PARTIAL BOXES OF 3.5" NAILS

303. VARIETY OF NAILS

304. LARGE BOTLS, NAILS AND MORE

305. METAL GAS CAN, METAL LUBE CONTAINER, PARTIAL CONTAINER OF HY-TRAN FLUID AND PARTIAL CONATINER OF MULTGEAR LUBE EP SAE 80W-90

306. 4 GREASE GUNS

307. VARITEY OF NAILS, COPPER PIPE FITTINGS AND MORE

308. VARIETY OF NAILS, BOTLS AND MORE

309. SEARS UTILITY WATER PUMP (SERIAL# H73) 115/230 VOLTS
BRIGGS & STRATTON PULL CORD MOTOR (MODEL# 80502)

310. METAL TOOLBOX WITH VARIETY OF ITEMS: SEE PHOTOS FOR MORE DETAILS
BOX IS 17" X 8" X 8" AND A SMALL BUCKET OF PARTS

311. SMALL BUCKET OF PARTS OF MISC. ITEMS

312. A GOULD'S 1/2HP JET PUMP (MODEL# CJ05N) AND A 1HP CLASS 9013 GOULD'S PUMP

313. ANTIQUE WESTERN ELECTRIC TELEPHONE; USED AS D�COR. MOUNTED TO A PIECE OF PRESSBOARD.

314. HANDMADE ICE CHIPPER 54" LONG, 58" PRY BAR, PIECE OF 46" PIPE WITH A 1.5" OUTER DIAMTER

315. VARIETY OF ITEMS TO INCLUDE HINGES, CASTOR NAILS, LARGE BOLTS AND MORE

316. 6 BALL HITCHES: (1) 2" BALL AND (5) 1-7/8"
(3) 9" SPRINGS, NUTS AND BOLTS AND MORE

317. VINTAGE DOUBLE COIN OPERATED PARKING METERS BY DUNCAN MEATER 17" X 19"

318. RED LANTERN D�COR 12" HIGH

319. 2 RED DECORE LANTERS 12" & 5.5" TALL

320. 1 SYLVANIA 120 VOLT 2-LAMP RAPID START ENERGY EFFICIENT MAGNETIC BALLAST (REPLACES 570322) STILL IN PACKAGE
VINTAEG DOOR KNOBX, 2 SETS OF WOOD DOOR LOCK ASSEMBLYS AND MORE

321. BENCH VISE BY LITTLE GIANT #5207

322. VARIETY OF BELT BUCKELES TO INCLUDE SIGMA INDUSTRIES, DETROIT DEISEL, LANSDOWNE ENGINEERING, PETERSON DRILLING AND MORE.

323. ASSORTED HORSE RELATED BOOKS - SEE PHOTOS FOR TITLES.

324. A STAN PRO DELUXE CAR BODY TRIM KIT
VINTAGE 9" X 9" SET OF 2 HUBCAPS BY FIAT
7" X 7" EHADLIGHT
4.5" FORD HUBCAP, LAMP COVERS AND MORE

325. ASSORTEMTN OF CAR PARTS TO INCLUCE: ACU-FULL AUTO AIR CONDITIONING & REFRIGERATNT MEASURING AND CHARGRING KIT, AC SPARK PLUS #5613957, #5613325
NAPA OIL VILTER #1006, #1172, #7011
SPARK PLUBS BY NAPA #H10
NAPA AMMETER #701-1053
NAPA FUEL FILTER #3311 AND MORE!

326. VINTGE LUNCH BOX, VINTGE METAL TRIANGLE DINNER BELL AND ORANGE HARD HAT

327. VINAEG WOODEN REMINGTON CARTRIDGE BOX, DOVETAILED CORNERS 14.5" X 9.5" X 9"
VINTAGE ANTHES EMERGENCY ROAD REFLECTOR KIT - COMPLETE AND MORE

328. A MOEN POST-TEMP TUB & SHOW VALVES #MT253G KIT - APPEARS NEW IN BOX
ACE WINDOW INSULATION KIT
150 GALLON PER HOUR DRILL POWERED FLUID TRANSFER KIT #DPFTK1
A TEEL WATER PUMP (SERIAL# P102227)

329. TELEX ECHELON 100 HEADSET WITH ORIGINAL BOX AND MANUAL

330. DECORATIVE METAL BABY BUGGY 11" X 12", HORSE PICTURE BY RUANE MANNING WITH WOOD FRAME BUT NO GLASS 22.5" X 27", SAN ANGELO ANTLER MOUNTING KIT AND PACKAGE OF TYVEK WEATHER RESISTANT PRIVATE PROPERTY SIGNS.

331. (4) SETS OF ICE SKATES INCLUDING TOUR 60 SERIES XL15 SIZE 13, CCM CHILDRENS SKATES SIZE 11, WOMENS ICE RIDGE SKATES SIZE 10 1/2", IMPERIAL MENS SKATES

332. ANTIQUE WOODEN TOOL BOX MEASURING 32 3/4" LONG X 9" DEEP X 12 1/2" TALL WITH ASSORTED HAND SAWS, A BOW SAW, A MEAT CLEAVER AND MORE

333. PING PONG TABLE WITH NET AND 4 PADDLES

334. VINTAGE NEPTUNE TROLLING MOTOR WITH EXTRA PROP, MODEL # WC1 SERIAL # G1353RU, UNKNOWN WORKING CONDITION BUT METAL PROP IS IN GOOD CONDITION

335. "ENJOY SQUIRT" THERMOMETER
(winning bidder will need to remove from post)

336. ASSORTED LUMBER - SEE PHOTOS

337. VINTAGE FIRE EXTINGUISHER

338. HEPA AIR CLEANER BY HOMEDICS IN ORIGINAL BOX

339. COLEMAN GAS LANTERN AND ATTACHMENT FOR PROPANE HEATER

340. (3) ANTIQUE JACKS

341. VERY LARGE VINTAGE HINGES - SEE PICTURES FOR MEASUREMENT

342. COLEMAN CAMP STOVE, SMALL OUTDOOR GRILL AND PLASTIC COVERS

343. COOK MASTER TURKEY FRYER IN ORIGINAL BOX

344. 15 QT RIVAL CROCK POT WITH THREE SPOT WARMING TRAYS AND PLASTIC COVERS FOR THE TRAYS AND ONE LARGE STOCK POT IN ORIGINAL BOX

345. LARGE ASSORTMENT OF CAMPING ITEMS, TIN POTS AND PANS, TIN CAMPING STOVES AND MORE!

345A. VERY NICE SET OF ENAMEL CAMPING COOKWARE AND DISHES! COFFEE POT, PLATES, CUPS AND FRYING PAN

346. LARGE GROUP INCLUDES (2) LARGE CANVAS PACKS, A PAIR OF LG STERNS RAIN GEAR INCLUDING PANTS AND JACKET, SMALL CANVAS PACK, CANTEENS AND MORE

347. VERY LARGE MILITARY STYLE BACKPACKS AND DUFFLES, ONE ZIPPERED CAMO BAG, AND MORE!

348. APPROX 18' X 32' TARP, APPEARS TO BE IN GOOD CONDITION

349. (2) MOLINE ROPE PULLEYS, AND ONE MORE VINTAGE PULLEY

350. THIS IS A GREAT SET OF DIY VINTAGE TOOLS! JUST ADD HANDLES! EITHER THAT OR SOME REALLY NICE VINTAGE D�COR! INCLUDES PITCHFORK, RAKE, AXE HEAD, SLEDGEHAMER HEAD, SHOVEL HEAD AND MORE!!

351. HEAVY CHAIN WITH HOOKS ON ENDS, MEASURES 19' LONG AND ONE SMALL SECTION 44" OF CHAIN, 2 MISC TIRE CHAINS AND SECTION OF STEEL ROPE

352. VINTAGE WOOD AND STEEL CORNERED BOX MEASURING 13" X 19" X 11" HIGH

353. VINTAGE WOOD AND STEEL CORNERED BOX MEASURING 13" X 19" X 11" HIGH - SIDE READS BOWMAN

354. VINTAGE WOOD AND STEEL CORNERED BOX MEASURING 13" X 19" X 11" HIGH - SIDE READS HUNDING DAIRY - CHICAGO

355. SET OF 6 VINTAGE HIGH BACK CHAIRS, TWO HAVE BURGUNDY SEAT COVERS, OTHERS ARE PLEATHER - 36" HIGH

356. LARGE QTY OF SLATE ROCK WITH SOME PIECES OF CERAMIC TILE

357. (2) 20 GALLON PROPANE TANKS

358. (3) 20 GALLON PROPANE TANKS

359. 1 WOODEN DOOR 30" X 78", 2 CHAIRS ONE WOODEN 17-3/4" TO SEAT, ONE METAL FRAME 13" TO SEAT

360. ANGIQUE PARLOR QUEEN BISSELL'S CYCO BALL BEARING HAND-PUSH SWEEP VACUUM

361. 11 PIECES OF UNBARKED DIAMOND WILLOW 95" LONG TO 22" LONG

362. 12 PIECES OF UNBARKED DIAMOND WILLOW 112" LONG TO 24" LONG

363. ANTIQUE SINGER SEWING MACHINE WITH STAND 36.5"W X 18"D X 30.5"H WITH SEWING MACHINE PARTS AND ACCESSORIES
SERIAL# G3550475

364. 7 METAL WIRE PLANT SHROUDS

365. VINTAGE METAL TOBAGGON 73"LONG

366. VINTAGE SLED WITH STEEL RUNNERS AND FRAME 36" LONG

367. VINTAGE SLED WITH STEEL RUNNERS AND FRAME 59" LONG

368. HOUSEHOLD ESSENTIALS UMBRELLA CLOTHES DRYER, 165Ft. MINNESOTA FLAG 36" TALL X 58" LONG

369. CROQUET SET

370. BARREL OF FUN, BASKETBALLS, SOCCERBALLS, VOLLEYBALL, FOOTBALL AND MORE

371. 5 SET OF CROSS COUNTRY SKIS, 2 PAIR OF ALPINA SKI SHOES - BOTH ADULT AND CHILDREN SKIS AND SHOES SIZE 7.5 SHOES

372. ANTIQUE WOODEN BARRELS 17"H X 11"W

373. 6 WOODEN CANOE PADDLE

374. WOODEN LOFT OR DOCK RAILING 102" LONG, ONE 34.5" LONG

375. LARGE QUANTITY ANTIQUE, VINTAGE FITTINGS, SOME HORSE TACK FITTINGS.

376. WOODEN 6-SIDED TABLE 33.5" X 38.25"H
EBCO FOLDING TABLE LEGS, ONE SET OF 2 LEGS
3 METAL FOLDING CHAIRS.

377. METAL BOX STORAGE CONTAINER 26"W X 13"D X 24"H ON CASTERS

378. 2 METAL ROUND FEEDING BUCKETS, ONE RUBBER ROUND FEEDING BUCKET, ONE METAL FEEDING TRAY, LARGEST BUCKET IS 24" WIDE 11" TALL WITH WOODEN HANDLES

379. 1 METAL ROUND FEEDER AND WATERER

380. 1 METAL ROUND FEEDER AND WATERER

381. HAND TOOLS, PICK, HOE, WOOD PICK, BROOM AND MORE

382. ANTIQUE HAND TOOLS, WOODEN SCYTHE, POST HOLE DIGGER, PRY BAR, HANDSAW AND MORE

383. (4) 84" LONG SKIS FOR SLEIGH OR WAGON, ORIGINAL ANQITUE LOGGER SELGITH WITH BEAMS, YOKE AND HARWARE - SEE PHOTOS.

385. (3) 6 TO 8 GALLON PALSTIC WATER JUGS AND 2 PLASTIC 10 GALLON JUGS

386. WOODEN HANDLE ANTIQUE HAY FORK 48" LONG

387. 20" RALLY PUSH MOWER WITH 3.75hp BRIGGS & STARTTON
MODEL# 2P372A; SERIAL# 021794M 000798

387A. TIKI POLE WOOD POLE 88" LONG X 10"WIDE
WAS TO BE USED TO MAKE A TOTEM POLE
IT'S READY FOR YOUR CARVINGS.
SUCH A BEAUTIFUL WOOD POST!

389. 20 FOOT EXTENSION LADDER WHEN EXTENDED

390. 16 FOOT WOODEN PLICK

391. VINTAGE WOODEN EXTENSION LADDER 22 FEET LONG EXTENDED

392. (2) 2-PERSON SAWS - NEED HANDLES 78" LONG

393. PLASTIC 4" FLEABLE DRAIN PIPE

394. METAL ROAD SIGNS SAYING "DEAD END"

395. METAL ROAD SIGN SAYS "NO PASSING ZONE"

396. 3 METAL ROAD SIGNS AND ONE HAZARD WARNING SIGN

397. ANTIQUE LADDER JACKS

398. ASSORTMETN OF SLEIGH OR TRAILER SUSPENSION SPRINGS 34" LONG, 26" LONG

399. ANTIQUE HAY SPIKE, LEVER OPERATED BALE GRABBER, METAL HOOK

400. METAL A-FRAME HITCH 39"L X 28"W

401. 8 PIECES OF PINE SLAB WOOD 181" LONG TO 40" LONG

402. RIGHT SIDE OF DEER ANTLER AND 3 HORSESHOES

403. EVENEER AND SINGLE TREE

404. 2 LEATHER HORSE COLLARS, ONE HAME, ONE WOODEN YOKE 34" LONG

405. 2 WOODEN YOKES 41" & 34" LONG

406. VINTAGE HAND SPUN GRINDING WET STONE OR STAND

407. LEATHER HORSE COLLAR AND 2 WOODEN HOKES 1 IS 34" LONG

408. 3 WOODEN YOKES 41" WIDE

409. 4 SMALL METAL SIGNS SAYING "CAUTION DEEP WATERING HOLE"

410. 4 SMALL METAL SIGNS SAYING "CAUTION DEEP WATERING HOLE"

411. METAL SIGN WITH 90 DEGREE ARROW ON IT.

412. 2 METAL SIGNS WITH HORSE AND BUGGY ON THEM.

413. METAL ROAD SIGN WITH HORSE AND BUGGY PICTURE ON IT, ATTACHED TO METAL FENCE POST 114" LONG, METAL SIGN AND POST SAYING "CAUTION HORSES"

414. HORSE BUGGY SHAFT 92" LONG X 42"WIDE

415. ANTIQUE WOOD BUGGY/WAGON CART POLE HITCH OAK AND IRON 141" LONG X 44"W

416. ASSORTED METAL FENCE POSTS - SEE PHOTOS

417. 3 LENGTHS OF CHAIN EACH WITH AN EYE ON ONE END.

418. ASSORTED METAL FENCE POSTS - SEE PHOTOS

419. ASSORTED METAL FENCE POSTS - SEE PHOTOS

420. POST DRIVER / POUNDER

421. THE PARTS TO PUT TOGETHER A HEAVY TANDEM DRAY
4 RUNNERS, BRACKETS, PINS AND SUPPORT PARTS. 
 

422. PUSH LAWN MOWER WITH 3.5hp BRIGGS & STRATTON MOTOR WITH GOOD COMPRESSION.

423. HITCH MOUNT 33"W X 39"L

424. ASSORTMENT OF MISC. WIRE - SEE PHOTOS

425. 3 DIFFERENT SECTIONS OF ALUMINUM PLANKS

426. STEEL RING FOR WAGON WHEEL 45" WIDE, METAL PARTS FOR HORSE DRAWN LOGGERS SLED

427. CHEVROLET HEATER BLOWER MOTOR, HARRISON H-02-47 2 WEST COAST STYLE MIRRORS

428. TECUMSEH ENGINE, UNSURE OF HORSEPOWER, HAS GOOD COMPRESSION.

429. ASSORTED METAL CHIMNEY PIPE AND ACCESSORIES

430. FIBERGLASS BOAT SHELL 114" LONG X 33"WIDE

431. FIBERGLASS HOMEMADE BOAT SHELL 114" LONG X 33" WIDE

432. SET OF 2 COLUMBUS HYDRAULIC RAMS 37" LONG

433. 3 TIRES AND RIMS, SIZES 7.50-16LT, H78-15, 6.00-16, MUD FLAP AND PLASTIC COVER BY CATCO

434. 3 TIRES AND RIMS, SIZE 6.00-13 WITH LITTLE TREAD

435. COUNTRY SQUARE TIRE AND RIM SIZE 8.25-20 WITH GOOD RUBBER

436. 2 TRACTOR FRONT TIRES AND RIMS SIZE 4.00-15 WITH GOOD RUBBER

437. SUMMIT RADIAL TRAIL CLIMBER TIRES, SIZE LT245/75R16

438. MASTERCRAFT P794 TIRE SIZE 205/70R15

439. 2 TIRES AND RIMS SIZE 8.25-20, LITTLE TREAD

440. 2 TIRES AND RIMS SIZE 8.25-20, LITTLE TREAD

441. MANY ROLLS OF ELECTRIC FENCE WIRE, SCRAP TIN METAL

441A. LARGE PILE OF SCRAP METAL, HARDWARE TIN, STEEL AND MORE

442. FRONT AXLE 64"W, TIRE SIZE 67B-15, RUBBER IS GOOD

443. REAR AXLE 64" WIDE, TIRES SIZE 7.60-15, NEED RUBBER

444. TRAILER AXLE 61"WIDE, TIRE SIZE 4.80-12

445. (3) LOGS WITH BURLS, PINE (2) 63" LONG AND ONE 17" LONG

446. (3) LOGS WITH BURLS, PINE, (2) 54"L AND ONE 22"LONG

446A. TWO 55 GALLON METAL BARRELS, ONE HAS A STEEL COVER AND LOT INCLUDES A STOP SIGN USED AS A COVER.

Map

Close

Location has been calculated by address and may not be 100% accurate.




Auction Items For Sale

THIS UNIQUE ESTATE FEATURES 2 WILLY'S COLLECTIBLE JEEPS, A 1951 CHEVROLET DUMP TRUCK, AN ALLIS-CHALMERS TRACTOR WITH SNOW PLOW AND ATTACHMENTS, OUTDOOR EQUIPMENT, BOATS AND CANOES, HOMEMADE TRAILERS, SLEIGH AND HORSE TACK, SHOP TOOLS AND EQUIPMENT, T

THIS UNIQUE ESTATE FEATURES 2 WILLY'S COLLECTIBLE JEEPS, A 1951 CHEVROLET DUMP TRUCK, AN ALLIS-CHALMERS TRACTOR WITH SNOW PLOW AND ATTACHMENTS, OUTDOOR EQUIPMENT, BOATS AND CANOES, HOMEMADE TRAILERS, SLEIGH AND HORSE TACK, SHOP TOOLS AND EQUIPMENT, TAXIDERMY, LEATHER JACKETS AND HARLEY-DAVIDSON CLOTHING, COMPOUND BOW, ARROWS, FISHING LURES, TRAPS, HOUSEHOLD AND ANTIQUES! BE SURE TO BROWSE ALL PAGES - THERE ARE TREASURES TO BE FOUND!

 

1. 1963 WILLY'S JEEP 4X4 PICKUP
SERIAL# 5527811085
GVW: 6,000 lbs.
LICENSE: WILLYS - COLLECTOR PLATE
MILEAGE: 62,937
ENGINE: 6 CYL. 230 TORNADO
TRANSMISSION: 4 SPEED MANUAL HIGH/LOW
BLOCK HEATER
SEATS 3
1-7/8" BALL HITCH
WOOD SIDE & HEAD RAILS
4-WHEEL DRIVE

LOTS OF NEW PARTS!

  • MUFFLER
  • BELTS
  • HOSES
  • SHOCKS
  • BRAKES
  • AIR CLEANER
  • VALVE COVERS
  • HUBS
  • REBUILT TRANSMISSION
  • U-JOINTS
  • DRIVE SHAFT


RESTORATION WELL ON IT'S WAY AND READY FOR PAINT!! SOLID BODY, DIAMOND PLATE BED & TOOLBOX, GOOD RUBBER ON 245/75/16 KELLY SAFARI AWR TIRES.  RUNS, DRIVES AND WAS DRIVEN

THIS VEHICLE HAS A REASONABLE RESERVE AND A MOTIVATED SELLER, IT WOULD BE WISE TO BE THE HIGH BIDDER!

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: $35.00 for non-Collector Plates; If buyer qualifies for Collector plates: No Fee; Plate Fee: $8.00 Non-collector or $12.50 Collector; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:

  • NEW INSURANCE CARD (for this vehicle)

Or you may provide all three of the following:

  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE


.


2. 1949 WILLYS JEEP 4X4 TRUCK
SERIAL# 57548 154970
MILEAGE: 12,761
ENGINE: 4 CYLINDER
TRANSMISSION: 4-SPEED MANUAL
1-7/8" BALL HITCH
SEATS 2
4-WHEEL DRIVE

THIS WILLY'S IS A CLASSIC COLLECTOR - RUNS, DRIVES AND WAS DRIVEN!

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: $35.00 for non-Collector Plates Collector Fees will differ; Plate Fee: $8.00 Non-collector; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:

  • NEW INSURANCE CARD (for this vehicle)

Or you may provide all three of the following:

  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE




3. 1951 CHEVROLET 6400 DUMP TRUCK
SERIAL# 21SW-E 3085
GVW: 16,000 lbs.
LICENSE: 98019 EXP: 1985
MILEAGE: 67,350
ENGINE: 6 CYLINDER
TRANSMISSION: 5-SPEED MANUAL
SEATS 3
MUD FLAPS

THIS DUMP TRUCK HAS NO BRAKES AND WILL NEED TO BE TOWED/HAULED, BATTERY IS WEAK BUT WILL JUMP START.  RUNS, DRIVES AND WAS DRIVEN!

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: To be determined by buyer's use; Plate Fee: $8.00 ; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:

  • NEW INSURANCE CARD (for this vehicle)

Or you may provide all three of the following:

  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE




4. 1951 MODEL B ALLIS-CHALMERS WITH 84" SNOW PLOW, HOMEMADE PLOW MOUNT AND SAW ATTACHMENT WITH 27.5" BLADE.  BLADE, BELTS AND DRIVE SHAFT NOT CONNECTED TO FRAME
67" LONG X 43"WIDE


4B. HOMEMADE ROCK BOAT 71"L X 44"W

4C. 3 HOMEMADE DRAGS 64"W X 96" L AND 70"W X 47"L AND 36"L X 9.5"W

4D. SPRING TOOTH DRAG 64"W X 60"L

5. 1994 ALUMACRAFT BOAT AND TRAILER PACKAGE

BOAT:
Year: 1994
Make/Model: Alumacraft
Length: 14 Foot
Body Style: Jon Boat
VIN: ACBF4161H394
Registration# MN8730GS Exp: Dec. 31, 2019
Load Capacity: 885lbs.
Motor capacity: 25hp
Seats 5 passengers
-Includes anchor and oars

TRAILER:
Length: 16 Foot
Style: Tilt Boat Trailer
License: AALU872 Exp: Permanent
Tire Size: 4.80-12
Hitch: 1-7/8"
Light Plug: None will need to be wired.
-tongue, jack & spare tire.

Additional Fees Charged on Invoice: Documentation Fee: $45.00; State Sales Tax 8.375% tax on boat
NOT ON INVOICE Additional Fees that will be charged at Pickup/Titling: Filing fee: $11.00; Transfer fee $3.00; State Sales Tax is 6.5 % of final purchase price on trailer and trailer value will be 20% of the final purchase price. Boat is $13.00 to transfer or $41.60 to transfer and renew



 

6. 18 FOOT LONG ALUMINUM CANOE WITH 2 PADDLES, SMALL FIXABLE LEAK

Additional Fees Charged on Invoice: Documentation Fee: $25.00; State Sales Tax 8.375% tax on boat
NOT ON INVOICE Additional Fees that will be charged at Pickup/Titling:  Boat is $13.00 to transfer or $34.10 to transfer and renew


7. 1974 HOMEMADE BOX TRAILER
VIN# G425700
BOX SIZE 84"L X 53"W
TIRES NEED REPLACEMENT, SIZE H-78-15
1-7/8" BALL

Additional Fees Charged on Invoice: Documentation Fee: $45.00; County Excise Tax: $20.00
NOT ON INVOICE: Additional Fees that will be charged at Pickup/Titling: Registration Fee: $55.00; Plate Fee: $2.50; Public Safety Vehicle (PSV) fee: $3.50; Transfer tax: $10; Title fee: $8.25; Title Tech. Surcharge: $2.25; Filing fee: $11.00; (additional $2.00 fee if loan is applied to vehicle) State Sales Tax is 6.5 % of final purchase price.

IMPORTANT NOTICE:
In Compliance with MN state law effective 1/2016
This law applies to any vehicle to be registered and titled in the state of Minnesota.
Buyer of this vehicle will be required to provide the following at pickup, before we can transfer the title:

  • NEW INSURANCE CARD (for this vehicle)

Or you may provide all three of the following:

  • NAME OF INSURANCE COMPANY
  • POLICY NUMBER (for this purchased vehicle)
  • EXPIRATION DATE



8. HOMEMADE TRAILER WILL NEED A BED, BED SIZE IS 120" L X 65.75"W. 2" BALL REQUIRED - NO TITLE

9. VINTAGE CUTTER SLEIGH WITH RED VINYL COVERD SEATS AND RED ACCENTS
MADE BY LULL CARRIAGE CO. OF KALAMAZOO, MICH.
HAS CURVED METAL RUNNERS AND WOODEN FRAME
INCLUDES BUGGY HAME
DOOR PANELS ARE INCLUDED BUT NOT ATTACHED
SOME DAMAGE TO SEAT COVER
REAR OF SLEIGH NEEDS WOOD REPAIR
72" LONG X 42" X 47"
ALSO 2 SETS OF JINGLE BELLS INCLUDED!
(PLEASE SEE PICTURES OF DAMAGE TO REAR WOODEN PANEL)

10. FISH HOUSE ANGLING/ SPEARING WITH  SLEIGH W/ RUNNERS.  HOUSE IS IN  2 HALFS FOR HAULING ON THE SLEIGH TO SETUP,  HOUSE IS 6' X 8'  2 HOLES EA. CAN BE EITHER ANGLE OR SPEARING. HAS LP HEATER 

11. A CAMPBELL-HAUSFELD INDUSTRIAL AIR COMPRESSOR, MODEL #: L141DT. REGULATOR WITH GAUGE, COMES WITH (3)-HOSE REELS, HOSES AND ACCESSORIES, A BINKS FILTER WITH GAUGE, EXTRA BINKS NOZZLE AND EXTRA REGULATOR. IT WILL BE THE WINNING BIDDERS RESPONSIBILITY TO DISCONNECT THE POWER TO UNIT AND TO MOVE AND LOAD AS AUCTION STAFF WILL NOT BE ABLE TO ASSIST

12. A KLUTCH INVERTER POWERED MIG 140 Si PORTABLE DC INVERTER WIRE FEED WELDER. COMES WITH AN ARGON TANK WITH GAUGES.

13. EX-CELL PRESSURE WAVE 2400 PSI 6.5 HP PRESSURE WASHER. POWERED BY HONDA ENGINES GX SERIES COMMERCIAL. MODEL #: 2403 CWH.

14. SEARS CRAFTSMAN 15" DRILL PRESS
MODEL# C63FRL4229; PART# 817557
5/8" CHUCK
12-SPEED
250-3100 RPM
120 VOLT
8.0 AMP
1725 RPM
60HZ
 

15. JOHNSON 15 HP MOTOR. MODEL #: J15RE0D. IN GOOD CONDITION. TURNED OVER, GOOD COMPRESSION. COMES WITH STAND, GAS TANK, FUEL LINE AND MOTOR FLUSHER.

16. CRAFTSMAN RADIAL 100-10" ACCRA-ARM RADIAL ARM SAW, MODEL#: 113.29440. TESTED AND WORKING. COMES WITH METAL STAND AND HOSE.

17. CRAFTSMAN MOTORCYCLE/ATV HYDRAULIC JACK, CAPACITY 1500 POUNDS. MODEL #: 9-50190.

18. BEAR SKIN RUG. LENGTH OF THE SKIN FROM FRONT PAW TO FRONT PAW IS 49"-LENGTH OF SKIN FROM NOSE TO PAW IS 59"

19. BEAR CUB MOUNT IN A TREE HOLDING STANCE. LENGTH OF CUB IS 25"

20. ADULT FOX MOUNT STANDING ON A PIECE OF DRIFTWOOD. PIECE MEASURES 29" X 21"

21. TROY BUILT ROTO TILLER
MODEL# 171432
7hp BRIGGS & STRATTON MOTOR

22. MONTGOMERY WARD COMPOST GRINDER
MODEL# GIL21326A
5HP BRIGGS & STRATTON MOTOR

23. NEPTUNE TROLLING MOTOR WITH EXTRA PROP, MODEL WC1 SERIAL C1353RU, METAL PROP IN GOOD CONDITION, UNKNOWN OVERALL WORKING CONDITION

24. 325 GALLON PLASTIC WATER TANK

25. VINTAGE FIRE HYDRANT MADE BY EDDY VALVE CO. 51" TALL

26. THIS LOT INCLUDES FIRE POKER, COPPER BAR, REBAR, HI-LIFT JACK WITH ADDITIONAL BAR

27. LARGE SHOP BROOM, GOOD CONDITION

27A. TIRE IRON, SLEDGE HAMMER, EXTRA HEAD FOR SLEDGE HAMMER AND 60"

28. (3) ORGANIZERS INCLUDING VARIOUS SCREWS, FITTINGS, SOME ELECTRICAL, NUTS & BOLTS, BRASS RIVETS AND MUCH MORE. SMALLEST MEASURES 12 1/2" X 6" X 6" HIGH, NEXT UNIT MEASURES 12 1/2" X 6" X 14", LARGEST ORGANIZER IS 15" X 6 1/2" X 18 1/2". PLEASE NOTE THAT THE SMALLEST ORGANIZER HAS A LOOSE TOP AND SOME OF THE DRAWERS HAVE CRACKS

29. (2) STACKABLE ORGANIZERS WITH VARIOUS PARTS, MISC NUTS & BOLTS, WASHERS & MORE - BOTH MEASURE 20" X 6 1/2" X 10" HIGH AND STICK (20" TOTAL)

30. TWO-MAN VINTAGE LOGGING SAW, WOOD HANDLES, OVERALL LENGTH IS 60"

31. (3) BOXES OF STICK MATCHES, GAPS & CRACKS, STARTING FLUID, ELITE RED MULTI-PURPOSE HEAVY LOAD GREASE, MARVEL MYSTERY OIL AND MORE!!!

32. THIS LOT INCLUDES MULTIPLE SCREWDRIVERS, CHALK LINE, SCRAPERS AND MORE!

33. VINTAGE PING PONG TABLE MEASURING 109" LONG X 60" X 29" HIGH, COMES WITH NET AND HARDWARE AND (4) PADDLES

34. LARGE AMOUNT OF VINTAGE WOOD RASPS, SOME WITH METAL HANDLES (2) WITH WOOD HANDLES

35. LARGE AMOUNT OF VINTAGE WOOD RASPS, SOME WITH METAL HANDLES WITH WOOD HANDLES

36. BENCH VISE, 6" JAW - WINNING BIDDER WILL BE RESPONSIBLE FOR REMOVING THE VISE FROM THE TABLE

37. STEEL PLATES - LARGEST PLATE IS 1' X 1' X 5/8" THICK AND OTHER SMALLER PIECES

38. HEAVY DUTY MILWAUEE SANDER MODEL # 6065 - 9"

39. BLACK & DECKER INDUSTRIAL POLISHER WITH BOTTLES OF MIRROR GLAZE, FILL 'N GLAZE AND MORE

40. RICH LINE MODEL 702 POP RIVET GUN IN CASE, RATCHET STRAPS AND DIAMOND ALLOY WRENCH MEASURING 12" LONG, ALSO RICHLINE TEXTRON 202 RIVETER

41. VINTAGE WOOD PLANER, HAND CRANK DRILL, SMALL HATCHET WITH LEATHER SHEATH, STANLEY LEATHER TOOL BELT PARTS, RATCHET STRAPS

42. (3) BUCKETS FILLED WITH MISC STEEL, CHAIN AND PARTS - SEE ALL PICTURES

43. WOOD BENCH WITH ONE SHELF MEASURES 73 1/2" X 25" X 38"-DOES NOT INCLUDE ITEMS ON SHELF

44. PYLE PTAU45 STEREO POWER AMPLIFIER SET UP FOR SERIUS XM WITH USB / CD - SERIUS ANTENNA ONYX EZ MODEL XEZ1 - SPEAKERS INCLUDED ARE RCA MODEL # RTD325W, (2) KLH 9113. IT WILL BE THE WINNING BIDDERS RESPONSIBILITY TO DISCONNECT AND REMOVE

45. METAL CABINET WITH ROUNDED CORNERS - 5 SHELVES - MEASURES APPROXIMATELY 24" X 11 1/2" X 64" - DOES NOT INCLUDE ITEMS LOCATED IN CABINET

46. METAL TOOL CABINET - 8 DRAWER AND FOLD OVER TOP - MEASURES 26" X 16" X 17 1/2" - INCLUDES BALL HITCHES, ELECTRICIANS TAPE, BRUSHES, ELECTRICAL ITEMS AND WIRE AND ALL ITEMS SHOWN - SEE PICTURES

47. LARGE TOOL CABINET ON CASTERS WITH BOTTOM STORAGE AREA AND FOLD OUT AND 6-DRAWERS. GOOD CONDITION. MEASURES APPROXIMATELY 34" X 18" X 37 1/12"

48. METAL TOOL BOX WITH TWO DRAWERS - INCLUDES ITEMS SHOWN - SEE PICTURES, MEASURES 26" X 12" X 9" HIGH

48A. VARIETY OF SPRAY PAINT, RUSTOLEUM, FIBERGLASS RESIN, PARTIAL JUG OF MINERAL SPIRITS, ACRYLLIC LAQUER THINNER, CONCRETE BONDING ADHESIVE AND MUCH MORE USED FOR BODY WORK - SEE PICTURES�.ALL ITEMS LOCATED IN CABINET!

49. METAL BENDIX TOOL BOX WITH LOCKING KEY, 4 SHELVES, NOT ON CASTERS - MEASURES 33" X 12" X 36"

50. BINKS WREN AIRBRUSH KIT WITH ACCESSORIES SHOWN AND PAPERWORK

51. STEEL BOX INCLUDING PNEUMATIC AIR TOOLS INCLUDING SIOUX, EVERCRAFT GRINDER, INGERSOLL RAND DRILL AND MORE

52. LARGE GROUP OF TOOLS FOR BODYWORK, SEE ALL PICTURES

53. BIG GROUP OF CHISELS AND PUNCHES INCLUDING CRAFTSMAN, DAVIES AND MORE - VARYING SIZES - SEE PICTURES FOR MEASUREMENTS

54. COPPER HEAD MALLET AND TACK HAMMERS

55. VINTAGE METAL LITTLE DEVIL CRAFTSMAN TOOLBOX FULL OF SK, CRAFTSMAN, MAC WRENCHES WITH LIFT OUT DRAWER, PRYBARS. MEASURES 19 1/2" X 6 1/2" DEEP X 7" HIGH

56. THIS LOT INCLUDES CRAFTSMAN 60-PC MECHANICS TOOL SET, MISC US MADE SOCKETS AND STARRETT AND LAWSON GAUGES

57. GROUP OF DRAW KNIVES AND HOOKS FROM A LOG TURNING / PULLING TOOL

58. METAL BOX INCLUDES SOME HOOKS AND CHAINS, METAL BRACKETS AND MORE. RED METAL BOX INCLUDES LARGE BOLTS AND ALL ITEMS SHOWN IN PICTURES

59. LOT INCLUDES SNIPPERS, SCISSORS, SIDE CUTTERS AND VARIOUS CUTTING TOOLS. ONE IS DIAMALLOY - VERY INTERESTING GROUP OF TOOLS!

60. METAL TOOL BOX INCLUDING ALL CRAFTSMAN 1/2" DRIVE STANDARD SOCKETS, EXTENSIONS AND MORE!

61. 1/4" SK SOCKET SET, CRAFTSMAN EXTENSION, TWO SETS OF MAC STANDARD SOCKETS 3/8 DRIVE SOCKETS

62. SMALL METAL BOX WITH MINIATURE WRENCHES INCLUDING PROTO, SK, FILSON AND MORE. (2) SMALL CRAFTSMAN RATCHETS 1/4" AND THE LARGER METAL BOX CONTAINS A MIX OF CRAFTSMAN, MAC, SK AND MORE

63. MORGAN NOKKER DENT PULLING TOOL, MEASURES 32" LONG

64. AUTO BODY TOOLS, PULLER AND SMALL DRILL MEASURE APPROX 21" LONG

65. LARGE DIAMALLOY ADJUSTABLE PLIERS, CHANNEL LOCK, RIGID HEAVY DUTY PIPE WRENCHES

66. RUBBER MALLOT, 3 BALL PEEN HAMMERS AND A REGULAR HAMMER

67. ALLEN WRENCHES IN VARYING SIZES, SOME QUITE LARGE, PLIERS AND MORE

68. (2)-SQUARES, ONE IS A CRAFTSMAN, SLIDING T-BEVEL BY GREAT NECK, (4)-SAWS, (2)-SMALL SAWS, AND A COPING SAW. COMES WITH A WOODEN BOX WITH A LIFT UP TOP ON CASTORS. 35 1/2" X 11 1/2" X 14 1/2"

69. ONE PIECE OF DIAMOND PLATE. 38" X 16"

70. (2)-WOODEN AND METAL VINTAGE LEVELS, YARD STICKS AND MORE

71. PAIR OF AUTO BODY JACKS. 55" LONG. MISSING HANDLES.

72. (2)- BAR CLAMPS. ONE IS 41 1/2" AND ONE IS 65"

73. (2)-ADULT FOX PELTS

74. (2)-ADULT FOX PELTS

75. (4)-ADULT PINE MARTEN PELTS

76. (2) SMALL ANIMAL PELTS, ONE APPEARS TO BE A FOOT

77. 6-POINT RATTLE ANTLERS AND ADDITIONAL ANTLER (WOULD MAKE A GOOD CHEW TOY FOR A DOG)

78. SPARK PLUG CLEANER, IT WILL BE THE WINNING BIDDERS RESPONSIBILITY TO DISASSEMBLE

79. 18" CRAFTSMAN PIPE WRENCH AND MORE

80. (2)-VINTAGE JACKS

81. (3)-2 TON COME A LONGS.

82. (3)-LONG NECK FUNNELS, HOSE PIECES, BRUSH, TROUBLE LIGHT (TESTED AND WORKING) , OIL FILTER WRENCH AND LED CLIP ON HAT LIGHT. TESTED AND WORKING

83. ONE CRAFTSMAN 24" PIPE WRENCH, ONE TRIMO 24" PIPE WRENCH AND ONE WALWORTH COMPANY 24" PIPE WRENCH

84. 2-TON FLOOR JACK BY A.T.D. HYDRAULICS AND LUG WRENCHES

85. 5 GALLON BUCKET FULL OF SCRAP METAL

86. 3 SPEED METAL FAN BY GE. TESTED AND WORKING. MOUNTED ON A METAL STAND ON CASTORS

87. A MEN'S XL CAMO JACKET BY OUNT'N PRAIRIE, IN GOOD CONDITION

88. (2)- PAIRS OF MEN'S WOOL PANTS BY JOHNSON, APPROXIMATELY 38" X 30." ONE PAIR COMES WITH GENUINE ITALIAN LEATHER BELT AND SUSPENDERS.

89. REVERSIBLE MEN'S DOWN HUNTING VEST. APPEARS TO BE A SIZE LARGE. A MEN'S XXL CAMO COVERALLS WITH A REMOVABLE HOOD

90. A LINCOLN 225 AMP ELECTRIC ARC WELDER. 230 VOLTS. MODEL #: AC-225-S. SITTING ON A STAND WITH CASTORS. 17" X 11" X 24", NOT INCLUDING STAND

91. (2)-WELDING HELMETS AND A PAIR OF WELDING GLOVES

92. AUTO-DARKENING WELDING HELMET BY WEL-BILT, #: ADF 550 AND MORE

93. 4-TIER METAL CABINET ON CASTORS. INCLUDES CONTENTS. 22 1/2" X 15 1/2" X 30 1/2"-DOOR NEEDS LATCH

94. PLASTIC SKELETON. 5 FEET TALL.

95. 4-TIER METAL SHELVING UNIT WITH DOORS THAT LOCK AND COMES WITH A KEY. 4 SMALL SHELVES INSIDE EACH DOOR. 33" X 12" X 29"

96. 3 DRAWER TOOL CABINET ON CASTORS. HAS A BOTTOM SHELF WITH DROP DOWN COVER. INCLUDES WRENCHES, SOCKETS AND MORE. 26" X 17" X 32"

97. DAYTON SINGLE PHASE ELECTRIC GRINDER, 1/3 HP, 115 VOLTS, MOUNTED ON A 9" X 7" TIMBER. MODEL #: S60CXDNW-4613. TESTED AND WORKING.

98. SEARS CRAFTSMAN 3/4 HP BENCH GRINDER-115 VOLTS-7" X 3/4" WHEELS, MODEL #: 257.191.500-MOUNTED ON A METAL PEDESTAL-TESTED AND WORKING. COMES WITH WORK LIGHT.

99. (2)-CLIP ON WORK LIGHTS AND A HALOGEN WORK LIGHT-ALL TESTED AND WORKING. SMALL ASSORTMENT OF LIGHT BULBS AND A PAIR OF CHEMICAL SAFETY GLASSES

100. WELDING TANK STAND ON WHEELS, TO INCLUDE HOSES, GAUGES AND TORCHES. COMES WITH TOTE

101. SET OF HALOGEN WORK LIGHTS ON A STAND-TESTED AND WORKING-NEEDS ONE BULB

102. (3)-BOTTLE JACKS. COMES WITH 2 HANDLES. 2 JACKS ARE UNMARKED. ONE IS A NAPA FLEET MODEL #: 91-229. IT IS A 12 TON JACK WITH A 9"-17 3/4" RANGE

103. 14" ROUND STEEL MARINE CORP WALL PLAQUE. ONE 24" X 36" MARINE CORP FLAG AND ONE 16" X 23" MARINE CORP FLAG

104. ASSORTED NAILS, NUTS, BOLTS AND MORE. SEE PICTURES

105. SPRINGS, PIPE FITTINGS, NAILS, NUTS, BOLTS AND MORE. SEE PICTURES

106. ASSORTMENT OF HINGES AND MORE

107. (3)-TUBES OF ELITE RED HIGH TEMPERATURE LUBRICANT, METAL BOX WITH SPOOLS OF STEEL WIRE, 15 AMP FUSES, WIRE CONNECTORS, DIFFERENT GAUGES OF PRIMARY WIRE AND MORE

108. ONE FULL AND ONE PARTIAL CARBURETOR KIT BY NAPA, #: 2-1402. NAPA ENGINE HEATER FREEZE PLUG #: 605-3180, VARIETY OF OLD GAS CAPS AND MUCH MORE. SEE PICTURES FOR DETAIL

109. SEARS ROUTER-6.5 AMPS. 110-120 VOLTS, MODEL #: 315.17380-TESTED AND WORKING.

110. STIHL 034 CHAINSAW, #: 311Y WITH EXTRA CHAIN AND MORE

111. JONSEREDS 62 COLLECTOR'S CHAINSAW OF SWEDEN. COMES WITH EXTRA CHAINS, NOT FOR THIS SAW AND 2 FUNNELS

112. CRAFTMAN MITER BOX MOUNTED ON A SMALL BOARD

113. (3)-CHICAGO TOOLS TIRE DOLLYS

114. 2 IRWIN QUICK-GRIP ADJUSTABLE CLAMPS AND (2) ADDITIONAL 30" QUICK RELEASE ADJUSTABLE CLAMPS.

115. STURDY WOODEN WORKBENCH MEASURING 48" X 24" X 32"- ITEMS ON BENCH NOT INCLUDED

116. 5 GALLON BUCKET WITH McGUIRE-NICHOLAS CANVAS CARPENTER'S CARRY-ALL, TO INCLUDE ZIP TIES, HAMMER, CAT'S PAW, SCREWDRIVERS, CHISELS OF VARYING SIZES AND MORE

117. STURDY WOODEN WORKBENCH MEASURING 75" LONG X 24" X 36" HIGH - DOES NOT INCLUDE ITEMS ON WORKBENCH

118. DEWALT GRINDER 120 V MODEL # DWE4011 (TESTED AND WORKING), MILWAUKEE 9" HEAVY DUTY SANDER 120V SERIAL # 703-37451 (TESTED & WORKING) AND MISC GRINDING WHEELS IN VARYING SIZES AND EXTENSION CORD

119. MILWAUKEE ELECTRIC DRILL SERIAL # 880C598041666 (TESTED & WORKING) AND LARGE QTY OF GRINDING, SANDING WHEELS AND DREMEL TOOL WITH ACCESSORIES 120V MULTI-PRO MODEL 285

120. MILWAUKEE ELECTRIC DRILL SAW 120V SERIAL # 685-22738 AND BLACK & DECKER CIRCULAR SAW 7 1/4" BLADE SERIAL # 15370 (BOTH TESTED & WORKING, SURGE PROTECTOR AND MORE

121. ELECTRIC MILWAUKEE JIG SAW 120V SERIAL# 749-15579 AND DEWALT ELECTRIC CIRCULAR SAW 7 1/4" MODEL DWE575 AND HEAVY DUTY EXTENSION CORD

122. 6-PC PIPE THREADER SET AND ASSORTED TAPS

123. BLACK & DECKER MOUSE SANDER WITH ADDITIONAL PADS AND BAG (TESTED AND WORKING) AND WRENCHES INCLUDING MOSTLY SK, SOME MAC AND MORE

124. SMALL SLEDGEHAMMER, HAMMER, T-SQUARES, VISE GRIP PLIERS AND MORE

125. THIS ENTIRE LOT IS MAC WRENCHES, PLEASE SEE PICTURES!

126. BANNER BODY REPAIR KIT MODEL #B65114, HAS 4 TON CAPACITY

127. 18V DEWALT DRILL SET COMPLETE WITH BATTERIES AND CHARGER MODEL DC920

128. MILWAUKEE ELECTRIC SUPER SAWZALL IN CASE WITH EXTRA BLADES (TESTED & WORKING) 120V NUMBER 0-2800 SERIAL # 963D300260912, INCLUDES MANUAL

129. THIS LOT INCLUDES CRAFTSMAN SQUARE AND HACKSAWS AND TWO SMALLER SAWS

130. VARIETY OF DRILL BITS AND GLASS CUTTERS - SEE PICTURES

131. THIS LOT INCLUDES TIN SNIPS, SCISSORS, CUTTING TOOLS AND OTHER VARIOUS CUTTING TOOLS - SEE PICTURES

132. LARGE QUANTITY OF SAW BLADES AND THIN RIM SATIN CUT DADO SET - SEE PICTURES

133. LARGE QUANTITY OF SANDING DISCS, ABRASIVE BLADES, GRINDING DISKS

134. HANSON DRILL BIT SET, SPADE BIT SET, ASSORTED DRILL BIT IN VARYING SIZES

135. PARTIAL ROLL OF EVERCOAT EVER MASK MASKING PAPER APPROXIMATELY APPROXIMATELY 36" WIDE

136. LARGE QUANTITY OF ABRASIVE SHEETS, FINE SAND PAPER, 3M COARSE SANDPAPER, SANDING BLOCKS & MORE

137. LARGE LOT OF ASSORTED SCREWS AND LIKE HARDWARE - SEE PICTURES

138. METAL TABLE MEASURING 32" X 18" X 26" HIGH

139. (2) RIDGID PIPE WRENCHES, 14" X 18"

140. 13" WELL POINT & VINTAGE CRAFTSMAN PIPE VISE FOR STEEL PIPE GRIPS 1/8 TO 2 AND BENDS 1/8 TO 3/4"

141. NYE #2 UNIVERSAL ONE WHEEL OR THREE WHEEL PIPE CUTTER 1/8 TO 2" AND MUELLER 1898 PIPE RATCHET REAMER

142. PIPE THREAD COMPOUND, PLUMBERS TAPE, SOLDERING PASTE FLUX, LEAD FREE TINNING FLUX, VISE GRIPS AND ASSORTED PLUMBING TOOLS

143. SMALL PRY BAR, MAGNET EXTENSIONS, 4-1 SCREWDRIVER, EXTENSION MIRROR, LEATHER PUNCH, VISE GRIPS AND MORE

144. 2 WHEEL DOLLY / HAND CART

145. ACE 100' TAPE MEASURE, STANLEY 100' TAPE MEASURE, LUFKIN 50' METAL TAPE (DOES NOT REEL WELL), SPEEDLINE, AND PLUMB BOBS

146. METAL SQUARES, STANLEY PLANER, 3 VINTAGE HOOKS MOUNTED ON METAL AND VARIOUS VINTAGE TOOLS - SEE PICTURES

147. PNEUMATIC AIR TOOLS INCLUDING NATIONAL DETROIT, BLACK & DECKER SANDER, ATCOA VIKING DUAL PISTON SANDER #71973, 80 GRIT SANDPAPER FOR ATCOA SANDER AND MORE

148. PNEUMATIC AIR TOOLS INCLUDING ONE SMALL SANDER AND CP AIR SANDER MODEL CP870

149. ROUND SANDPAPER PIECES 251U - BOXES OF ABRASIVE COATED DISCS BY 3M IN VARYING GRITS (180,220), ROLL OF 3M 316U980 SANDPAPER

150. ACE ELECTRIC DUAL TEMPERATURE HEAT GUN TG-1001, CP AIR TOOL AND METAL BOX WITH TOOLS AS SHOWN IN PICTURES, LOT INCLUDES TWO SMALL HANGING SCALES, BUNGEE CORDS

151. LOT OF HARDWARE INCLUDING BOLTS, NAILS, FASTENERS AND MORE - SEE PICTURES

152. SMALL FIRST AID KIT, BASTER, ANTIFREEZE TESTERS, OIL FILTER WRENCH, DIFFERENT CAULING, PLUMBERS PUTTY, AND METAL STRAPPING AND MORE

153. COMMERCIAL GREASE GUN AND TWO CAULKING GUNS AND MORE

154. WEATHER STRIPPING, ROLLS OF VERY THIN SANDPAPER AND 6 QT STEEL POT WITH VARYING LENGTHS OF LIGHTWEIGHT CHAIN

155. SCREW GRAB, SILICONE RELEASE AGENT, 3-IN-1 MOTOR OIL FOR 1/4 HP, COOL TOOL CUTTING OIL FOR DIFFICULT MACHINING, ANTI-SEIZE LUBRICANT AND MUCH MUCH MORE

156. MUSTANG EMBLEM & LETTERS (INCOMPLETE), TOOL CLEANER, VINTAGE LIGHTS - BIGGER LIGHT READS HEADLAMP 6V, SMALLER TWO LIGHTS READ 12V, (2) 4-WHEEL DRIVE CHROME PIECES, MIRROR, THICK GLASS (CHIPPED)

157. CRAFTSMAN METAL BOX WITH DIFFERENT SIZE HOLE SAWS AND VARIOUS BITS AND CRAFTSMAN 1/2" REVERSIBLE ELECTRIC DRILL MODEL 315.7782 (TESTED & WORING)

158. LISLE MODEL W JEEPERS LO-BOY CREEPER AND NAPA BALKAMP ROLLER CREEPER

159. ROLLER CREEPER EXCELL AND NAPA FLOOR CREEPER

160. SMALL WOODEN WORK TABLE ON CASTERS, MEASURES 37 1/2" X 23 1/2" X 33 1/2" - HAS ONE SHELF AND DOES NOT INCLUDE ITEMS ON THE TABLE

161. BRANDED GARMENTS LEATHER RIDING PANTS SIZE 38 - GOOD CONDITION

162. HARLEY DAVIDSON LEATHER VEST WOMENS LARGE

163. U.S. CHAP & SADDLEBAG LEATHER RIDING CHAPS - WOMENS LARGE

164. U.S. CHAP & SADDLEBAG LEATHER RIDING CHAPS - WOMENS SMALL

165. HARLEY DAVIDSON LEATHER RIDING VEST - MENS LARGE

166. PELLE STUDIO MENS MEDIUM LEATHER JACKET - LINED

167. STREET LEGAL BY BERMAN'S LEATHER MENS SIZE 44 JACKET

168. IMITATION BROWN LEATHER VEST - WOMENS MEDIUM

169. ARTIC CAT HELMET IN ORIGINAL BOX, COMES WITH LINER AND FACE COVER, MODEL FG-5 - SIZE L

170. ARTIC CAT HELMET IN ORIGINAL BOX, MODEL FG-5 WITH LINER AND FACE COVER - SIZE XXL

171. HELMET WITH GENUINE HARLEY DAVIDSON BOX. HELMET READS "GRAMMA" ON IT - 7 3/8" LARGE

172. HARLEY DAVIDSON EASY ACCESS (ZIP SIDE) BOOTS - US SIZE 10 - WOMEN

173. HARLEY ULTIMATE MACHINE BOOK, BIG TWINS, AMERICAN CLASSICS AND BIG BOOK OF HARLEY DAVIDSONS

174. HARLEY DAVIDSON LEATHER BOOTS MENS BOOTS SIZE 11

175. HARLEY DAVIDSON ELECTROGLIDE MODEL - FINE DETAIL - SOME PIECES ARE LOOSE

176. HARLEY DAVIDSON LEATHER BALL CAP (ONE SIZE) AND LEATHER CAPTAINS HAT (SMALL/WOMENS)

177. HARLEY DAVIDSON RAIN JACKET AND PANTS WITH ZIPPERED HARLEY DAVIDSON POUCH - LARGE

178. HARLEY DAVIDSON RAIN JACKET AND PANTS WITH HARLEY DAVIDSON ZIPPERED POUCH - MEDIUM

179. HARLEY DAVIDSON FANNY PACK, STURGIS 2004 BALL CAP & HARLEY DAVIDSON BEAR (SHOWS CONSIDERABLE WEAR)

180. METAL TABLE ON CASTORS WITH BUILT IN SHELF. WAS USED AS A WELDING TABLE. 48" X 24" X 30 1/2"

181. MATHEWS SOLO CAM MACHINED RISER COMPOUND BOW. LENGTH OF 45"-COMES WITH PADDED CAMO CASE WITH MULTIPLE POCKETS AND QUIVER WITH LEATHER STRAP AND (3)-TERMINATOR LITE HUNTER 4560 ARROWS WITH TIPS

181A. (12)-TERMINATOR LITE HUNTER 4560 ARROWS (SOME HAVE FLUORESCENT ARROW NOCKS) AND A TROPHY RIDGE WHISKER BISCUIT REPLACEMENT BISCUIT. IT IS A SIZE MEDIUM-RIGHT HAND FOR USE WITH CARBON ARROWS

182. A UNIQUE VINTAGE HANDMADE ARROW CARRYING BACK PACK WITH SHOULDER STRAP AND ZIPPERED POCKET. MULTIPLE ARROWS INCLUDED.

182A. (4)-BOWS. ONE IS 58", ONE IS 60", AND ONE IS 45"-THE OTHER BOW IS A BEN PEARSON ALL-AMERICAN #7064 BOW MEASURING 61"

183. (4)-VICTOR ANIMAL TRAPS MEASURING 6" ACROSS

184. (4)-VICTOR ANIMAL TRAPS MEASURING 4 1/2" ACROSS

184A. (4)-VICTOR ANIMAL TRAPS MEASURING 6" ACROSS

185. (4)-VICTOR ANIMAL TRAPS MEASURING 6" ACROSS

186. PIECE OF ROPE WITH 2 CLIPS ON THE ENDS, PARTIAL BOTTLE OF FOX HOLLOW'S PREMIUM WHITETAIL DEER URINE, SNAP-ON-TOOLS METRIC ALLEN WRENCHES, 2 SMALL ROUND METAL CONTAINERS AND A SMALL CANVAS CASE AND A LEATHER FLASK WITH CARRY STRAP

187. WICKER BACKPACK BASKET MEASURING 13" X 10" X 16"-ONE RABBIT PELT AND WOODEN PELT STRETCHER BOARDS

188. PLASTIC TACKLE BOX. MISCELLANEOUS FISHING ITEMS IN BOX, TO INCLUDE ZEBCO #33 REEL, FISHING LINE, HOOKS, SINKERS AND MORE.

189. VICTOR VINTAGE METAL TACKLE BOX. MISCELLANEOUS FISHING ITEMS IN BOX, TO INCLUDE BOBBERS, FISHING LINE, JIGS AND MORE.

190. VINTAGE FISHING LURES. SOME ARE MADE OF WOOD. ONE IS AN AIRPLANE LURE, ONE IS A CISCO KID AND ONE IS SHAKESPEARE GENUINE SWIMMING MOUSE.

191. VINTAGE FISHING LURES. SOME ARE MADE OF WOOD. ONE IS A GEORGE PORTER. ONE IS AN ORIGINAL RAPALA WOBBLER.

192. SMALL TUPPERWARE TACKLE BOX STYLE CONTAINER WITH MISCELLANEOUS FISHING ITEMS, SEE PICTURES FOR DETAILS. ADDITIONAL PLASTIC CONTAINER INCLUDES A JITTERBUG, FROG LURE AND MORE AND LOT ALSO INCLUDES MULTIPLE NEW SINKERS, SPINNERS AND MORE.

193. SPEARING DECOYS, APPEAR VINTAGE. (2)-ROPE FISH STRINGERS AND (3)-METAL FISH STRINGERS.

194. AN AMERISTEP G-20 GROUND BLIND WITH CAMO PATTERN. IT WEIGHS 13 POUNDS AND BLIND DIMENSIONS ARE 60" SQUARE X 68" TALL.

195. (2)-METAL MILK CRATES

196. (2)-METAL MILK CRATES

197. (2)-METAL MILK CRATES. ONE IS SLIGHTLY LARGER THAN STANDARD SIZE WITH A METAL BOTTOM PLATE THAT SAYS BRIDGEMAN RUSSELL.

198. PLASTIC CAR-CADDY AND (2)-SIDE VIEW MIRRORS

199. (2)-ICE FISHING RODS AND REELS. ONE VINTAGE ICE FISHING ROD WITH AN HT REEL, FISH NET, HOMEMADE FISH SCALER, A POP-UP BY THE ARCTIC FISHERMAN AND MORE.

200. (2)-ICE FISHING RODS AND (2)-ICE FISHING RODS AND REELS, AND (2)-RODS AND REELS, ONE VINTAGE ROD AND REEL.

201. 48" PLASTIC ROD CARRIER WITH (3)-2 PIECE FISHING RODS.

202. 54" (5)-PRONG FISHING SPEAR

203. 55" (7)-PRONG FISHING SPEAR

204. ELECTRIC PAINT SPRAYER BY WAGNER PAINT CREW PLUS. MODEL #: 0504124.

205. CRAFTSMAN PAINT SPRAYER WITH CANISTER. (2)-BINKS MODEL 7 PAINT SPRAYERS WITH CANISTERS. ONE CANISTER WITH A LID AND ADDITIONAL ATTACHMENTS INSIDE. SMALL BRUSHES, METAL FUNNEL, WAGNER REVERSIBLE SPRAY TIP, #: 0501411, STILL IN THE PACKAGE AND MORE.

206. LARGE LOT CONTAINING PAINT BRUSHES, DROP CLOTHS, PAINT PANS AND EVERYTHING YOU SEE IN PICTURES.

207. EAGLE SUPRAPRO I.D. FISH FINDER WITH ORIGINAL BOX AND MANUAL. SERIAL #: 006540020. NOT TESTED.

208. 8" CORDLESS TRIMMER BY TORO. MODEL #: 51467. COMES WITH MANUAL. TESTED AND WORKING.

209. JONSEREDS GR36 GAS POWERED BRUSH CUTTER. SIX FEET LONG.

210. TECUMSEH TC-II STRIKE MASTER MAG 2000-2 HP ICE AUGER AND A VINTAGE SNABB ICE FISHING AUGER HOLE BORER FROM SWEDEN.

211. THE NEW AND COMPLETE BOOK OF NIGHTCRAWLER SECRETS, UNIQUE STRINGER, SHIMANO R1000 REEL AND A GARCIA REEL.

212. ABU GARCIA CARDINAL MAX 3 FISHING REEL STILL IN ORIGINAL PACKAGING, A STRINGER, ROPE AND MORE.

213. VINTAGE METAL TACKLE BOX BY SIMONSEN METAL PRODUCTS-18 1/2" X 8 1/2" X 10"-BOX CONTAINS REELS, BOBBERS, SINKERS AND MORE.

214. CABELA'S "SECLUSION 3D"  HUNTING CAMO ONE-PIECE SUIT IN SIZE L/REG.  COMES WITH A CAMO BACKPACK.

215. (2)-COLLAPSIBLE METAL SAWHORSES. 38" IN LENGTH AND HEIGHT OF 30"

216. A WELLER SOLDERING GUN, MODEL #: D-550-PK, WELDING CHIPPING HAMMER, SPOOLS OF SOLDERING WIRE, BRAZING FLUX AND PARTIAL SPOOL OF AUTO-LITE AUTOMOTIVE AND AIRCRAFT CABLE.

217. A WEN SOLDERING GUN, MODEL #: 460. COMES WITH OWNER'S MANUAL. A STRIKER, VARIETY OF SOLDERING WIRE, WELDING CHIPPING HAMMER AND MORE.

218. A 10" BRINK & COTTON C-CLAMP. (2)-LARGE 200 MM C-CLAMPS AND A 150 MM C-CLAMP.

219. VARIETY OF LARGE C-CLAMPS. ONE IS A GORDON. MANY DIFFERENT BRANDS.

220. VARIETY OF LARGE C-CLAMPS. ONE IS FROM CINCINNATI TOOL CO.

221. DAYTON BLOWER MOTOR, MODEL #: 1TDT2. HP: 1/10, 115 VOLTS.

222. ONE GALLON PAIL OF HOSE CLAMPS IN VARYING SIZES.

223. VARIETY OF WELDING RODS IN VARIOUS SIZES AND WEIGHTS AND A SMALL SOLDERING BUCKET.

223A. LARGE GROUP OF AIR HOSE FITTINGS.

223B. (2)-STAPLE GUNS WITH EXTRA STAPLES, VINTAGE BOX OF HANSEN TACK POINTS, VINTAGE PLASTIC CORINA LARKS CIGAR BOX WITH EXTRA STAPLES.

224. VARIETY OF VICE GRIPS IN VARIOUS SIZES.

225. BERNZ-O-MATIC TORCH KIT AND VINTAGE WRENCHES. SEE PICTURES.

226. (5)-FLAIR BRAND AUTOMATIC FLOAT TYPE AIR VENTS, MODEL #: VH260301, WIRE BRUSHES, SMALL BLADES, THIN COATED WIRE, GAUGES AND MORE.

227. WORK BENCH VICE. WINNING BIDDER RESPONSIBLE FOR REMOVAL FROM WORK BENCH.

228. TECUMSEH TROY BUILT 10 HP SNOWBLOWER, MODEL #: 42012. RAN LAST WINTER. TURNS OVER-GOOD COMPRESSION.

229. ORIGINAL TIGER FURBY, 7 1/2" VINTAGE METAL CRAWLER, 4 1/2" TONKA CRAWLER DOZER AND MORE.

230. SONY DUAL CASETTE PLAYER WITH ALL CASETTES SHOWN. SEE PICTURES.

231. LARGE CERAMIC STEIN WITH DEER ON IT, A CERAMIC BUCK AND DOE AND A GLASS JAR WITH LID. STEIN MEASURES 16" HIGH. BUCK AND DOE MEASURES 11" HIGH.

232. PICKARD CERAMIC PIECE TO LOOK LIKE A FOUNTAIN AND VARIOUS ADVERTISING TINS, INCLUDING CAMPBELL'S SALT AND PEPPER CREAM CAN TINS, UNEEDA BISCUIT, MORTON SALT, HERSHEYS AND MORE.

233. 1:24 DIE-CAST 1932 FORD COUPE REPLICA (IN ORIGINAL BOX) AND A ERTL 1932 FORD DELIVERY VAN BANK WITH KEY.

234. CERAMIC D�COR INCLUDING 12" INCH HIGH SUNFLOWER AND CARROT, GARLIC AND ASPARAGUS WALL HANGINGS MEASURING 6" X 7 1/2" HIGH. HANGING HARDWARE INCLUDED.

235. A COLLECTION OF CHICKENS AND ROOSTERS IN VARYING STYLES AND COLORS. TALLEST CHICKEN IS 7 1/2."

236. A COLLECTION OF CHICKENS AND ROOSTERS. VARYING STYLES AND COLORS. ONE IS A SALT AND PEPPER SET. SEE PICTURES.

237. COLLECTION OF CHICKENS AND ROOSTERS. VARYING STYLES AND COLORS. TALLEST IS 7." INCLUDES ONE NAUGHTY CHICKEN WHO KEEPS LOOKING OVER THE EDGE OF THE TABLE.

238. SET OF TEN LOW BALL GLASSES WITH BUBBLED BASE AND THEY ALL SAY, "THE BLUE LINE LOUNGE."

239. 14" VINTAGE WINE DECANTER WITH (6)-GLASSES. NEVER USED. 6" HIGH, 6" ROUND CERAMIC CROCK A MAPLE LEAF.

240. CERAMIC GARDEN STAKE MUSHROOMS THAT YOU CAN SET NEXT TO YOUR GARDEN TROLLS. STAKES ARE 16" LONG AND THE HIGHEST MUSHROOM CAP IS 6" HIGH.

241. A PAIR OF BOSE SPEAKERS, MODEL #: 201 SERIES III AND ONE RCA SUB-WOOFER, MODEL #: RTD325W.

242. A LARGE LOT OF TIE DOWNS, RATCHETS AND ROPE.

243. WOODEN DECOR INCLUDING A ROCKING DOLL BENCH THAT IS 16" X 11 1/2" X 13", A WOODEN SPOON HOLDER AND MORE.

244. LARGE COLLECTION OF VINTAGE HATS INCLUDING BUDWEISER BEER HAT, STRAW HATS FROM THE RED HAT SOCIETY AND MORE. SEE PICTURES.

245. ASSORTED DECOR INCLUDING FISHING, NATURE, A TAYLOR THERMOMETER AND MORE. PLEASE NOTE ONE TUSK ON ELEPHANT IS LOOSE.

246. DECOR INCLUDING A GOLD LEAF METAL TREE, A CANDLELIT LAMP WITH A LEAF DESIGNED METAL SHADE AND MORE.

247. PEWTER DECOR INCLUDING A 6" HIGH PITCHER, CHALICE AND A BOWL.

248. A CERAMIC COW THAT IS 8" LONG, A CERAMIC COWBOY BOOT, A VINTAGE WOODEN LADLE, A WOOD AND BARB WIRE WELCOME SIGN AND A COW/FARM LIGHT WEIGHT CREAM CAN.

249. LONG HEAVY CHAIN, HARDENED METAL. KUPLEX HOOKS EACH END.

250. (2)-COME-A-LONGS

251. LONG CHAIN WITH HOOKS ON BOTH ENDS AND CHAIN TIGHTENERS.

252. (2)-HEAVY CHAINS AND A SET OF TIRE CHAINS.

253. A 5 GALLON BUCKET CONTAINING LONG HEAVY HARDENED CHAIN AND ASSORTED SMALL CHAINS.

254. A VINTAGE MIRRORED HORSE COLLAR MEASURING APPROXIMATELY 20" X 28" HIGH. VERY UNIQUE PIECE. MIRROR IS IN GOOD CONDITION BUT HAS A SMALL SECTION MISSING AT THE TOP. SEE PICTURES.

255. A LARGE LOT OF TARPS AND COVERINGS.

256. THIS LOT INCLUDES (3)-LONG HEAVY BRAIDED TOW ROPES. ONE HAS HOOKS ON BOTH ENDS.

257. WIRE UNDERLAYMENT MESH USED FOR SLATE ROCK. MEASURES 97" X 28"

258. THIS LOT INCLUDES PIECES OF PLYWOOD. LARGEST PIECE MEASURES 72" X 35."

259. VINTAGE CAST IRON BATHTUB 60"L X 30"W

260. ASSORTED SIZES OF METAL SHEETING FOR ROOF OR SIDING 38"W X 144" LONG DOWN TO 36"LONG

261. ASSORTED CONCRETE BLOCK AND PATIO BRICKS

262. (2) 30 GALLON METAL TRASH CANS WITH LIDS

263. (3) 3" X 12" MAPLE SLABS, (4) 3" X 9-3/4" MAPLE SLAB 101" LONG

264. LARGE VERY HEAVY DUMBBELL, APPEARS VINTAGE AND 18" ACROSS

265. LARGE ASSORTMENT OF CEMENT FINISHING TOOLS TO INCLUDE TROWELS, EDGER'S AND MORE

266. (2) 5 GALLON METAL BUCKET TO INCLUDE A SQUARE SHOVEL, HAMMERS, SMALL SLEDGE HAMMERS, CEMENT FINISHING TOOLS AND MORE

267. MONTGOMERY WARD CEMENT MIXER WITH ELECTRIC MOTOR (SERIAL# 557) 37" X 27" X 41"

268. 8 SECTIONS OF METAL SCAFFOLDING WITH BRACES, 1/2 A 5 GALLON METAL BUCKET OF EXTENSION PINS AND WOOD PLANKS FOR SCAFFOLDING AND SHORT PIECE OF A WOODEN LADDER

269. LARGE GROUP OF VINTAGE LEATHER STRAPS, HARNESSES AND HAIM'S - SHOWS CONSIDERABLE WEAR.

270. LARGE WOODEN BOX FULL OF PARTS FOR ELECTRIC FENCE, BOX IS 70"W X 19" X 20.5"

271. BUTT LINE, LONG LEAD, ROPE LEAD AND WHIP

272. TEAM HARNESS INCLUDING 2 HAIM'S, 2 COLLARS AND LARGE AMOUNT OF STRAPS AND MORE - SHOWS CONSIDERABLE WEAR.

274. 3 METAL PELT STRETCHERS

275. 3 METAL PELT STRETCHERS

276. LARGE HARNESS AND EXTRA STRAPS

277. 4 HEAVY STRAPS

278. GROUP OF VINTAGE HORSE BITS

279. SMALL HARNESSES

280. BRIDLES WITH BLINDS

281. BRIDLES WITH BITS, ONE HAS BLINDS

282. GROUP OF VINTAGE BRIDLES

283. GROUP OF VINTAGE BRIDLES

284. VINTAGE BRIDLE WITH BIT AND REINS

285. GROUP OF HORSE GROOMING TOOLS

286. SMALL PIECES OF LEATHER STRAPS AND A VARIETY OF TACK FITTINGS

287. VINTAGE HORSESHOES 4 ARE 3.5" X 4" AND 4 ARE 5" X 5", ONE IS 5" X 6"

288. SET OF HAIM'S, MADE OF METAL AND WOOD

289. SET OF VINTAGE HAIM'S, MADE OF METAL AND WOOD

290. PAIR OF 21" YOKES

291. PAIR OF 30" YOKES

292. SHORT PIECES OF CHAIN WITH "T" HOOK ENDS

293. 2 YOKES. ONE IS 34-1/2" AND ONE IS 36"

294. 3 YOKES. ONE IS 31" LONG AND ONE IS 40" LONG AND ONE IS 44" LONG

295. 12" WESTERN SADDLE - SEE PICTURES FOR DETAIL & DESIGN

296. 12" WESTERN SADDLE - SEE PICTURES FOR DETAIL & DESIGN

297. 14" WESTERN SADDLE - SEE PICUTRES FOR DETAILS & DESIGN

298. ANTIQUE METAL GRATE MEASURING 26" X 33.5"

299. HOMEMADE PULL-BEHIND EARTH BREAKER - NO WHEELS 33" X 38"

300. 1/2" CHAIN - 20 FEET LONG WITH HOOKS

301. 3 PIECES OF 1/2" CHAIN. ALL PIECES OF CHAIN ARE 63" LONG. ONE FORMS A "V" WITH 2 CONNECTORS, ONE HAS A HOOK ON THE END AND ONE HAS A NUT-BOLT-WASHER ON THE END.

302. 2 PARTIAL BOXES OF 3.5" NAILS

303. VARIETY OF NAILS

304. LARGE BOTLS, NAILS AND MORE

305. METAL GAS CAN, METAL LUBE CONTAINER, PARTIAL CONTAINER OF HY-TRAN FLUID AND PARTIAL CONATINER OF MULTGEAR LUBE EP SAE 80W-90

306. 4 GREASE GUNS

307. VARITEY OF NAILS, COPPER PIPE FITTINGS AND MORE

308. VARIETY OF NAILS, BOTLS AND MORE

309. SEARS UTILITY WATER PUMP (SERIAL# H73) 115/230 VOLTS
BRIGGS & STRATTON PULL CORD MOTOR (MODEL# 80502)

310. METAL TOOLBOX WITH VARIETY OF ITEMS: SEE PHOTOS FOR MORE DETAILS
BOX IS 17" X 8" X 8" AND A SMALL BUCKET OF PARTS

311. SMALL BUCKET OF PARTS OF MISC. ITEMS

312. A GOULD'S 1/2HP JET PUMP (MODEL# CJ05N) AND A 1HP CLASS 9013 GOULD'S PUMP

313. ANTIQUE WESTERN ELECTRIC TELEPHONE; USED AS D�COR. MOUNTED TO A PIECE OF PRESSBOARD.

314. HANDMADE ICE CHIPPER 54" LONG, 58" PRY BAR, PIECE OF 46" PIPE WITH A 1.5" OUTER DIAMTER

315. VARIETY OF ITEMS TO INCLUDE HINGES, CASTOR NAILS, LARGE BOLTS AND MORE

316. 6 BALL HITCHES: (1) 2" BALL AND (5) 1-7/8"
(3) 9" SPRINGS, NUTS AND BOLTS AND MORE

317. VINTAGE DOUBLE COIN OPERATED PARKING METERS BY DUNCAN MEATER 17" X 19"

318. RED LANTERN D�COR 12" HIGH

319. 2 RED DECORE LANTERS 12" & 5.5" TALL

320. 1 SYLVANIA 120 VOLT 2-LAMP RAPID START ENERGY EFFICIENT MAGNETIC BALLAST (REPLACES 570322) STILL IN PACKAGE
VINTAEG DOOR KNOBX, 2 SETS OF WOOD DOOR LOCK ASSEMBLYS AND MORE

321. BENCH VISE BY LITTLE GIANT #5207

322. VARIETY OF BELT BUCKELES TO INCLUDE SIGMA INDUSTRIES, DETROIT DEISEL, LANSDOWNE ENGINEERING, PETERSON DRILLING AND MORE.

323. ASSORTED HORSE RELATED BOOKS - SEE PHOTOS FOR TITLES.

324. A STAN PRO DELUXE CAR BODY TRIM KIT
VINTAGE 9" X 9" SET OF 2 HUBCAPS BY FIAT
7" X 7" EHADLIGHT
4.5" FORD HUBCAP, LAMP COVERS AND MORE

325. ASSORTEMTN OF CAR PARTS TO INCLUCE: ACU-FULL AUTO AIR CONDITIONING & REFRIGERATNT MEASURING AND CHARGRING KIT, AC SPARK PLUS #5613957, #5613325
NAPA OIL VILTER #1006, #1172, #7011
SPARK PLUBS BY NAPA #H10
NAPA AMMETER #701-1053
NAPA FUEL FILTER #3311 AND MORE!

326. VINTGE LUNCH BOX, VINTGE METAL TRIANGLE DINNER BELL AND ORANGE HARD HAT

327. VINAEG WOODEN REMINGTON CARTRIDGE BOX, DOVETAILED CORNERS 14.5" X 9.5" X 9"
VINTAGE ANTHES EMERGENCY ROAD REFLECTOR KIT - COMPLETE AND MORE

328. A MOEN POST-TEMP TUB & SHOW VALVES #MT253G KIT - APPEARS NEW IN BOX
ACE WINDOW INSULATION KIT
150 GALLON PER HOUR DRILL POWERED FLUID TRANSFER KIT #DPFTK1
A TEEL WATER PUMP (SERIAL# P102227)

329. TELEX ECHELON 100 HEADSET WITH ORIGINAL BOX AND MANUAL

330. DECORATIVE METAL BABY BUGGY 11" X 12", HORSE PICTURE BY RUANE MANNING WITH WOOD FRAME BUT NO GLASS 22.5" X 27", SAN ANGELO ANTLER MOUNTING KIT AND PACKAGE OF TYVEK WEATHER RESISTANT PRIVATE PROPERTY SIGNS.

331. (4) SETS OF ICE SKATES INCLUDING TOUR 60 SERIES XL15 SIZE 13, CCM CHILDRENS SKATES SIZE 11, WOMENS ICE RIDGE SKATES SIZE 10 1/2", IMPERIAL MENS SKATES

332. ANTIQUE WOODEN TOOL BOX MEASURING 32 3/4" LONG X 9" DEEP X 12 1/2" TALL WITH ASSORTED HAND SAWS, A BOW SAW, A MEAT CLEAVER AND MORE

333. PING PONG TABLE WITH NET AND 4 PADDLES

334. VINTAGE NEPTUNE TROLLING MOTOR WITH EXTRA PROP, MODEL # WC1 SERIAL # G1353RU, UNKNOWN WORKING CONDITION BUT METAL PROP IS IN GOOD CONDITION

335. "ENJOY SQUIRT" THERMOMETER
(winning bidder will need to remove from post)

336. ASSORTED LUMBER - SEE PHOTOS

337. VINTAGE FIRE EXTINGUISHER

338. HEPA AIR CLEANER BY HOMEDICS IN ORIGINAL BOX

339. COLEMAN GAS LANTERN AND ATTACHMENT FOR PROPANE HEATER

340. (3) ANTIQUE JACKS

341. VERY LARGE VINTAGE HINGES - SEE PICTURES FOR MEASUREMENT

342. COLEMAN CAMP STOVE, SMALL OUTDOOR GRILL AND PLASTIC COVERS

343. COOK MASTER TURKEY FRYER IN ORIGINAL BOX

344. 15 QT RIVAL CROCK POT WITH THREE SPOT WARMING TRAYS AND PLASTIC COVERS FOR THE TRAYS AND ONE LARGE STOCK POT IN ORIGINAL BOX

345. LARGE ASSORTMENT OF CAMPING ITEMS, TIN POTS AND PANS, TIN CAMPING STOVES AND MORE!

345A. VERY NICE SET OF ENAMEL CAMPING COOKWARE AND DISHES! COFFEE POT, PLATES, CUPS AND FRYING PAN

346. LARGE GROUP INCLUDES (2) LARGE CANVAS PACKS, A PAIR OF LG STERNS RAIN GEAR INCLUDING PANTS AND JACKET, SMALL CANVAS PACK, CANTEENS AND MORE

347. VERY LARGE MILITARY STYLE BACKPACKS AND DUFFLES, ONE ZIPPERED CAMO BAG, AND MORE!

348. APPROX 18' X 32' TARP, APPEARS TO BE IN GOOD CONDITION

349. (2) MOLINE ROPE PULLEYS, AND ONE MORE VINTAGE PULLEY

350. THIS IS A GREAT SET OF DIY VINTAGE TOOLS! JUST ADD HANDLES! EITHER THAT OR SOME REALLY NICE VINTAGE D�COR! INCLUDES PITCHFORK, RAKE, AXE HEAD, SLEDGEHAMER HEAD, SHOVEL HEAD AND MORE!!

351. HEAVY CHAIN WITH HOOKS ON ENDS, MEASURES 19' LONG AND ONE SMALL SECTION 44" OF CHAIN, 2 MISC TIRE CHAINS AND SECTION OF STEEL ROPE

352. VINTAGE WOOD AND STEEL CORNERED BOX MEASURING 13" X 19" X 11" HIGH

353. VINTAGE WOOD AND STEEL CORNERED BOX MEASURING 13" X 19" X 11" HIGH - SIDE READS BOWMAN

354. VINTAGE WOOD AND STEEL CORNERED BOX MEASURING 13" X 19" X 11" HIGH - SIDE READS HUNDING DAIRY - CHICAGO

355. SET OF 6 VINTAGE HIGH BACK CHAIRS, TWO HAVE BURGUNDY SEAT COVERS, OTHERS ARE PLEATHER - 36" HIGH

356. LARGE QTY OF SLATE ROCK WITH SOME PIECES OF CERAMIC TILE

357. (2) 20 GALLON PROPANE TANKS

358. (3) 20 GALLON PROPANE TANKS

359. 1 WOODEN DOOR 30" X 78", 2 CHAIRS ONE WOODEN 17-3/4" TO SEAT, ONE METAL FRAME 13" TO SEAT

360. ANGIQUE PARLOR QUEEN BISSELL'S CYCO BALL BEARING HAND-PUSH SWEEP VACUUM

361. 11 PIECES OF UNBARKED DIAMOND WILLOW 95" LONG TO 22" LONG

362. 12 PIECES OF UNBARKED DIAMOND WILLOW 112" LONG TO 24" LONG

363. ANTIQUE SINGER SEWING MACHINE WITH STAND 36.5"W X 18"D X 30.5"H WITH SEWING MACHINE PARTS AND ACCESSORIES
SERIAL# G3550475

364. 7 METAL WIRE PLANT SHROUDS

365. VINTAGE METAL TOBAGGON 73"LONG

366. VINTAGE SLED WITH STEEL RUNNERS AND FRAME 36" LONG

367. VINTAGE SLED WITH STEEL RUNNERS AND FRAME 59" LONG

368. HOUSEHOLD ESSENTIALS UMBRELLA CLOTHES DRYER, 165Ft. MINNESOTA FLAG 36" TALL X 58" LONG

369. CROQUET SET

370. BARREL OF FUN, BASKETBALLS, SOCCERBALLS, VOLLEYBALL, FOOTBALL AND MORE

371. 5 SET OF CROSS COUNTRY SKIS, 2 PAIR OF ALPINA SKI SHOES - BOTH ADULT AND CHILDREN SKIS AND SHOES SIZE 7.5 SHOES

372. ANTIQUE WOODEN BARRELS 17"H X 11"W

373. 6 WOODEN CANOE PADDLE

374. WOODEN LOFT OR DOCK RAILING 102" LONG, ONE 34.5" LONG

375. LARGE QUANTITY ANTIQUE, VINTAGE FITTINGS, SOME HORSE TACK FITTINGS.

376. WOODEN 6-SIDED TABLE 33.5" X 38.25"H
EBCO FOLDING TABLE LEGS, ONE SET OF 2 LEGS
3 METAL FOLDING CHAIRS.

377. METAL BOX STORAGE CONTAINER 26"W X 13"D X 24"H ON CASTERS

378. 2 METAL ROUND FEEDING BUCKETS, ONE RUBBER ROUND FEEDING BUCKET, ONE METAL FEEDING TRAY, LARGEST BUCKET IS 24" WIDE 11" TALL WITH WOODEN HANDLES

379. 1 METAL ROUND FEEDER AND WATERER

380. 1 METAL ROUND FEEDER AND WATERER

381. HAND TOOLS, PICK, HOE, WOOD PICK, BROOM AND MORE

382. ANTIQUE HAND TOOLS, WOODEN SCYTHE, POST HOLE DIGGER, PRY BAR, HANDSAW AND MORE

383. (4) 84" LONG SKIS FOR SLEIGH OR WAGON, ORIGINAL ANQITUE LOGGER SELGITH WITH BEAMS, YOKE AND HARWARE - SEE PHOTOS.

385. (3) 6 TO 8 GALLON PALSTIC WATER JUGS AND 2 PLASTIC 10 GALLON JUGS

386. WOODEN HANDLE ANTIQUE HAY FORK 48" LONG

387. 20" RALLY PUSH MOWER WITH 3.75hp BRIGGS & STARTTON
MODEL# 2P372A; SERIAL# 021794M 000798

387A. TIKI POLE WOOD POLE 88" LONG X 10"WIDE
WAS TO BE USED TO MAKE A TOTEM POLE
IT'S READY FOR YOUR CARVINGS.
SUCH A BEAUTIFUL WOOD POST!

389. 20 FOOT EXTENSION LADDER WHEN EXTENDED

390. 16 FOOT WOODEN PLICK

391. VINTAGE WOODEN EXTENSION LADDER 22 FEET LONG EXTENDED

392. (2) 2-PERSON SAWS - NEED HANDLES 78" LONG

393. PLASTIC 4" FLEABLE DRAIN PIPE

394. METAL ROAD SIGNS SAYING "DEAD END"

395. METAL ROAD SIGN SAYS "NO PASSING ZONE"

396. 3 METAL ROAD SIGNS AND ONE HAZARD WARNING SIGN

397. ANTIQUE LADDER JACKS

398. ASSORTMETN OF SLEIGH OR TRAILER SUSPENSION SPRINGS 34" LONG, 26" LONG

399. ANTIQUE HAY SPIKE, LEVER OPERATED BALE GRABBER, METAL HOOK

400. METAL A-FRAME HITCH 39"L X 28"W

401. 8 PIECES OF PINE SLAB WOOD 181" LONG TO 40" LONG

402. RIGHT SIDE OF DEER ANTLER AND 3 HORSESHOES

403. EVENEER AND SINGLE TREE

404. 2 LEATHER HORSE COLLARS, ONE HAME, ONE WOODEN YOKE 34" LONG

405. 2 WOODEN YOKES 41" & 34" LONG

406. VINTAGE HAND SPUN GRINDING WET STONE OR STAND

407. LEATHER HORSE COLLAR AND 2 WOODEN HOKES 1 IS 34" LONG

408. 3 WOODEN YOKES 41" WIDE

409. 4 SMALL METAL SIGNS SAYING "CAUTION DEEP WATERING HOLE"

410. 4 SMALL METAL SIGNS SAYING "CAUTION DEEP WATERING HOLE"

411. METAL SIGN WITH 90 DEGREE ARROW ON IT.

412. 2 METAL SIGNS WITH HORSE AND BUGGY ON THEM.

413. METAL ROAD SIGN WITH HORSE AND BUGGY PICTURE ON IT, ATTACHED TO METAL FENCE POST 114" LONG, METAL SIGN AND POST SAYING "CAUTION HORSES"

414. HORSE BUGGY SHAFT 92" LONG X 42"WIDE

415. ANTIQUE WOOD BUGGY/WAGON CART POLE HITCH OAK AND IRON 141" LONG X 44"W

416. ASSORTED METAL FENCE POSTS - SEE PHOTOS

417. 3 LENGTHS OF CHAIN EACH WITH AN EYE ON ONE END.

418. ASSORTED METAL FENCE POSTS - SEE PHOTOS

419. ASSORTED METAL FENCE POSTS - SEE PHOTOS

420. POST DRIVER / POUNDER

421. THE PARTS TO PUT TOGETHER A HEAVY TANDEM DRAY
4 RUNNERS, BRACKETS, PINS AND SUPPORT PARTS. 
 

422. PUSH LAWN MOWER WITH 3.5hp BRIGGS & STRATTON MOTOR WITH GOOD COMPRESSION.

423. HITCH MOUNT 33"W X 39"L

424. ASSORTMENT OF MISC. WIRE - SEE PHOTOS

425. 3 DIFFERENT SECTIONS OF ALUMINUM PLANKS

426. STEEL RING FOR WAGON WHEEL 45" WIDE, METAL PARTS FOR HORSE DRAWN LOGGERS SLED

427. CHEVROLET HEATER BLOWER MOTOR, HARRISON H-02-47 2 WEST COAST STYLE MIRRORS

428. TECUMSEH ENGINE, UNSURE OF HORSEPOWER, HAS GOOD COMPRESSION.

429. ASSORTED METAL CHIMNEY PIPE AND ACCESSORIES

430. FIBERGLASS BOAT SHELL 114" LONG X 33"WIDE

431. FIBERGLASS HOMEMADE BOAT SHELL 114" LONG X 33" WIDE

432. SET OF 2 COLUMBUS HYDRAULIC RAMS 37" LONG

433. 3 TIRES AND RIMS, SIZES 7.50-16LT, H78-15, 6.00-16, MUD FLAP AND PLASTIC COVER BY CATCO

434. 3 TIRES AND RIMS, SIZE 6.00-13 WITH LITTLE TREAD

435. COUNTRY SQUARE TIRE AND RIM SIZE 8.25-20 WITH GOOD RUBBER

436. 2 TRACTOR FRONT TIRES AND RIMS SIZE 4.00-15 WITH GOOD RUBBER

437. SUMMIT RADIAL TRAIL CLIMBER TIRES, SIZE LT245/75R16

438. MASTERCRAFT P794 TIRE SIZE 205/70R15

439. 2 TIRES AND RIMS SIZE 8.25-20, LITTLE TREAD

440. 2 TIRES AND RIMS SIZE 8.25-20, LITTLE TREAD

441. MANY ROLLS OF ELECTRIC FENCE WIRE, SCRAP TIN METAL

441A. LARGE PILE OF SCRAP METAL, HARDWARE TIN, STEEL AND MORE

442. FRONT AXLE 64"W, TIRE SIZE 67B-15, RUBBER IS GOOD

443. REAR AXLE 64" WIDE, TIRES SIZE 7.60-15, NEED RUBBER

444. TRAILER AXLE 61"WIDE, TIRE SIZE 4.80-12

445. (3) LOGS WITH BURLS, PINE (2) 63" LONG AND ONE 17" LONG

446. (3) LOGS WITH BURLS, PINE, (2) 54"L AND ONE 22"LONG

446A. TWO 55 GALLON METAL BARRELS, ONE HAS A STEEL COVER AND LOT INCLUDES A STOP SIGN USED AS A COVER.

contact_phone