Auction of Land,Construction and Farm Equipment for the estate of Paul Wakulchyk

Estate Auction in Hairy Hill , Hairy Hill, Alberta, Canada

06 Tuesday
06th July, 2021 8:30 AM

Auction of Land,Construction and Farm Equipment for the estate of Paul Wakulchyk

Estate Auction in Hairy Hill , Hairy Hill Alberta, Canada

Tuesday at - 06th July , 2021

Close

Notes

Here's a sale with a great opportunity to acquire some farmland and some great late model construction equipment as well as a large quantity of well, septic, and electrical parts as Paul was a well known backhoe operator who performed many septic system installations/well tie ins as well as oil/gas well road maintenance work. A sale that has something for everyone.For information on Pauls equipment and items for sale Call Bob at 780 318 2748 

 

Close

Description

 

FARMLAND   Selling Unreserved

Approx 200 acres

.

  • NE- 35-55-14 w4 approx  160 acres, 150.5 seeded acres.
  • S 1/2 of the north half of SW 12-56-14 w4 approx 40 acres , approx 39 seeded acres         

​Land Sale conditions

10% non refundable deposit down sale day.                                                                                  10% due December 1/2021                                                                                                                balance due prior to May 1/2022 possession date

2020 crop was wheat, 2021 seeded into canola. Real estate Handled by Antoniuk Reality , Contact Allen at 780-895-2442

Industrial

  • JD 644J wheel loader, c/w 9.5' WBM bucket, A/C . 2467 Hrs. at listing. Original owner.  s/n DW644JX608610
  • Degelman 46/57 12' dozer to fit the JD 644J
  • V plow for 644J
  • JD 872D Grader ,14' moldboard, rear 5 shank ripper with aux hyd. 17.5x 25 radials.2738 hrs showing .Original owner. S/N DW872DX613897
  • JD LC 180G Trackhoe c/w toothed bucket , Vg cond. 1396 hrs. Original owner. S/N 521042
  • JD 60" clean up bucket c/w thumb
  • Destec quick tach ripper tooth
  • JD 60" quick tach brush rake.
  • 72" skeleton grapple , new
  • 72" TMG brush cut mower
  • Talet International pipe grapple for skid steer
  • Champion 740A VHP Series 5 grader, 14' moldboard, 13' wing. 17.5x 25 rubber. M11 Cummins power. 11027 hrs. (W/O) s/n X029559X
  • JCB Series 3 214 4 wd extend backhoe , 92" bucket, cb radio, 19.5x 24 rears. 6626 hrs. s/n SLP214TCWO469602
  • Champion 660P Super Pac 7' +/- sheep foot packer c/w front dozer , Cummins power. s/n X101584X
  • 44' x 11.5' Well site power shack/tool crib on 4 skids. Caterpillar 3 phase generator,heater and hyd tank
  • 8 x 34' double skid insulated camp shack. Requires refinishing
  • Ing Rand XP375 light plant ,7040 hrs
  • Terex light plant, 10098 hrs
  • Magnum diesel light plant , 15376 hrs
  • Magnum diesel light plant, 17737 hrs
  • Ing Rand gas compressor
  • Ing Rand gas compressor  (for parts)
  • Tillit 6' 3 pt pto rotary mixer
  • Kuhn HR 3003 10' 3pt rejuvenator, s/n E0177
  • Lowe skid steer post auger
  • Ditch Witch R40 trencher

TRUCKS/CAR

  • 1995 IHC 9400 t/a tractor ,228" wb.11x 24.5 rubber. 5th wheel,wet kit ,product pump,60" sleeper. Last Certified in 2020.Cummins N 14, 18 spd. s/n 2HSFHAER6SC015184
  • 1990 IHC 8100 s/a tractor unit c/w 5th whl,air ride, wet kit,10spd. Cat diesel. 11x 24.5 rubber. Showing 068187km . s/n 1HSHBZJN4MH327088
  • 1977 Ford 9000 t/a gravel truck , 222" wb , rubber suspension, Detroit diesel, 13 spd. 16' Nahani gravel box.425/65r/22.5 frt and 11x 22.5"rear rubber , showing 101,194 km.s/n U90TUY50604
  • 1981 Ford 800 s/a deck truck c/w 5th wheel.28000#gvw. 5+2, 429 gas. 164,557km .s/n 1FDPF82K8FVA38433
  • 1998 Dodge 3500 4 wd, std trans,PTO, gas.c/w 118"deck , live roll and gin poles. s/n 3B6MF3658WM227922
  • 2007 Ford Harley Davidson series quad cab , powerstroke, 4wd, full load, leather, running boards, king pin 5th wheel.275/65/r20 rubber, showing 311,975 km. s/n 1FTWW31P97EB34198
  • 2012 Ford F 250 4wd crew cab , 6.2 l gas. s/n 1FT7W2B68CEB11476
  • 1990 GMC Sierra 2500 2wd service body truck. ext cab., Air. 263759 km, selling c/w large quantity stainless,brass ,galvanized plumbing fittings and adaptors for pumps and pressure systems 
  • 2001 VW GOLF TDI, 4dr hatch. Running. s/n WVWGF21J5YW449134

Trailers and recreation

  • 2016 Deloupe detach scissor neck tridem lowboy, last certified in 2020.11x 22.5" rubber .s/n 2D9EC5338B1004057
  • 2007 Midland 28' SL 2000 End dump gravel trailer , air ride c/w roll tarp.Certified in 2020.s/n 2MFB2R6C17R004397
  • Grain tailgate to fit above trailer
  • 2012 Double A 20' t/a car hauler trailer on 16" rubber, c/w spare.s/n 2DAEC66273CT013445
  • 2013 Mirage 16' enclosed trailer c/w with fold down door.s/n 5M3BE1626D1054640
  • Travelaire 25' gooseneck holiday trailer , 1 slide out,awning, a/c. s/n 2TTTW2521XR990324
  • 16' Fiberglass open bow boat c/w 90hp Merc , tarp and Bryant s/a trailer
  • Seamax Marine 14' Zodiac boat on Karavan s/a trailer s/n YLS4TA92H718
  • Univision approx 36' gooseneck trailer c/w dovetail and flip up ramps , sliding t axle. S/N not clear
  • Approx 50' Movall equip trailer c/w winch . 42' bed +8' gooseneck with 7' dovetail. SOLD AS IS, BUYER RESPONSIBLE TO LOAD
  • Triple axle bumper pull trailer, poor cond, farm use only
  • YAMAHA 25hp outboard motor
  • Minnkota 55# 12v trolling motor
  • Honda 200x trike
  • Honda ATC 110 trike
  • 1989 HONDA Fourtrax 200, 2wd quad, 16809km. 
  • Toro Groundsmaster 72" front mnt mower ( for rebuild or parts)

TRACTORS

  • JD 4040 2wd , 2 hyd and pto c/w 148 FEL ,joystick control,quad shift. 18.4x 38 rubber, showing 0210 hrs. s/n 4040H-006941R
  • Case 2670 4wd, 4 hyd. PTO, 18.4 x 38 duals ,showing 4236 hrs. (fair) s/n 8796711
  • Case 900 diesel, round fender, hyd and pto. 
  • Case 830 diesel , engine is rebuilt but not installed. 0 hrs. on complete overhaul needs to be assembled ( motor is stored dry inside garage)
  • IHC crawler

COMBINE

  • JD 9610 Maximizer , 7 belt pu, straw chopper and Crary chaff spreader. 2483 seperator hours, 3309 engine hrs. s/n X682026
  • JD 925 Straight cut header c/w pu reels. s/n H00925E660934

Tillage, seeding, farm equipment

  • Haybuster 1100 Big Bite tub grinder on 5th wheel trailer, Cat 3406B powered s/n 22-2-29-0051
  • Billion 10' grass seeder, s/n 1529918
  • CCIL 203 21' double wing chisel plow c/w 3 bar mtd harrows. s/n 22963
  • Ezee On 25' double wing disc
  • IHC #67 10' tandem disc 
  • VERTEC 5600 grain dryer plumbed to nat. gas. s/n 56HA034
  • TOX O WIK propane batch (bu) grain dryer
  • TYE , 3pth 5 shank paratill 
  • Schulte 570 trail type rough cut mower,Approx 7' cut .s/n C12090146804
  • Meridian HD 10-46 grain auger c/w 37hp engine and mover. Like new, 1 yr. old. s/n 13000005342
  • Brandt 13 x 70' swing auger, 1000 pto, electric swing, looks real good
  • Brandt 10 x 60 ' swing auger , 540 pto
  • W Field 8 x 61' auger with 10 hp, 3 phase motor and variable drive. VG. s/n 287569
  • W Field 7 x 46' auger c/w 5 hp , 3 phase motor
  • W Field 6 x 36' auger c/w 5 hp , 3 phase motor
  • WF 8X41' pto grain auger
  • SAS 31' grain auger , motor is broken

Grain Bins / Out buildings

  • SUPERIOR 5 ring, 16' dia.hopper bin on double skid c/w aeration tube ,opener and ladder. Only 2 years old
  • GOEBEL 5 ring hopper on double skid sells c/w AGI 10hp, 3ph aeration fan ,OBI temp sensor,opener and ladder
  • Westeel Rosco 14' approx 2600 bu hopper c/w 7.5 hp aeration fan
  • Westeel Rosco 14' 6 ring , approx 2100 bu hopper c/w AGI 7.5hp aeration fan
  • Westeel UFA  6 ring hopper bin on double skid
  • 6- Westeel Rosco 6 ring hoppers on double skids
  • 2 -Westeel Rosco 6 ring 19' hoppers on Stealth 3 skid bases
  • Westeel Rosco 5 ring bin on wooden floor
  • 7' x 10' metal clad job shack
  • 30' metal clad shelter on steel skids
  • 24' shelter on steel skids
  • 53' x 9.5' electrified c can

LIVESTOCK related

  • Ritchie 2 hole water bowl ( new)
  • Freestanding windbreaks 24'- 60'
  • Hi Hog maternity pen
  • panels and gates
  • wind break frames
  • Bale feeder
  • Hoof trimming chute
  • squeeze chute
  • Approx 150 bu wooden creep feeder on wheels
  • Quan of 6'-8' fence posts plus rolls of new barbwire

PLUMBING,HEATING and ELECTRICAL

  • 3 Honda trash pumps, 3" + 4"
  • Quantity of insulated chimney and stove pipes
  • Large quantity of 2"-4" discharge and suction lines
  • Large. quan of PVC fittings
  • Rolls of new 3/4"- 2" poly water line
  • weeping tile
  • well casing
  • drain lines
  • concrete septic tank risers
  • FG septic tanks
  • water hydrants
  • spools of submersible and variuos electrical wiring
  • pump control boxes, foot valves
  • new and used submersible and sump pumps
  • new electrical breakers ,connectors, splices, fuses,switches,shrink tubes
  • submersible pump motors
  • new pressure tank
  • cam locks
  • Large wire crimping tool

SHOP TOOLS 

  • 2 new 17 drawer tool box / work benches on castors
  • 1 new upright storage cabinet
  • 20 drawer work bench
  • Mastercraft 4 dr tool box
  • loaded bolt bins
  • 55ton Carolina hyd press
  • White Industries A/C recovery and recharge station
  • 9hp Honda gas air compressor
  • Hotsy steamer washer
  • Magikist pressure washer
  • Century 250amp AC welder
  • Thermal Arc 250 amp mig welder c/w argon
  • Portable welder on trailer c/w oxy acetylene bottles
  • Honda EU 3000 inverter
  • General International drill press, as new
  • power band saw
  • tire changer
  • trans jack
  • New oxy/acet hose sets with torches and tips, oxy and acet bottles
  • banding machine
  • air hose reels
  • OTC balljoint, pitman arm seperator tool plus more OTC tools
  • larger sandblaster c/w hood and supplies, respirator and paint supplies
  • jack stands, floor jacks, bottle jacks
  • Rigid 25' pipe thawers ( new) and 3 new 12' gutter deicing cable kits
  • transmission filler pails, funnels, mag lights
  • tap and die sets
  • chop saws and mitre saws
  • Rigid threaders and vices
  • gate hinges and latches, fence stretcher
  • brooms, shovels, bars , tie down and rachet straps,rain wear
  • gear wrenches including SAE and metric
  • Snap on battery powered impact wrenches,rachets, nut driver ,grinders c/w with charger, battery and carrying bag
  • OTC diagnostic camera, heat gun,OB2 scanner
  • large quantity of common air tools
  • large quantity of corded tools
  • large quantity of cordless tools
  • pipe and cresent wrenches, pry bars, chisels punches, rasps
  • creeper
  • FG ladders - 5-12'
  • 3-25kg bags of lawn seed and seeders
  • large quant of various oils, sprays, additives
  • bead blaster
  • 2 bags of R20
  • Wobble lamp
  • absorbent spill mats, spill kits, first aid kits
  • gopher getter
  • 48" concrete trowel
  • Stihl weedeaters, Jonsered chain saw
  • Ryobi mitre saw, skil saw, hole saw kit
  • sheet metal screws, various screws, bolts and nails
  • new gloves, rags
  • tarps, straps, hooks, grease nipple set
  • trailer receiver hitches
  • Hammers, picks, impact drivers, impact sockets, punches
  • air fittings and chucks 
  • Snap On snap ring pliers, tap/die,bit extractors
  • fuel line disconnectors, compression tester
  • test lights, multi meters, circuit testers
  • air angle drill
  • Westward 80# and 250# torque wrenches
  • 275# torque amplifier
  • Westward 1/2" socket sets
  • 2 Westward metric wrench sets to 32mm
  • Westward metric flex rachets, impact swivels
  • Milwaukee rechargable cutting tool
  • Hilti hammer drill
  • Stihl back pack sprayer
  • Dewalt and Rigid cordless tools
  • Milwaukee, Makita and Rigid power tools
  • Walter die grinder,angle drill , angle grinder
  • Dewalt cordless recip saw
  • Blue Point air grinder
  • Bearing driverset, Bushing remover tool
  • drill bits, tire patch kit
  • load tester and battery chargers
  • new boat fuel tank
  • soldering gun ,air pop riveter, air sander
  • anvil
  • parts washer, table saw
  • 3 t floor jack
  • Power Fist 3/4hp bench grinder
  • air compressor and air tanks
  • Motomco grain tester and scale
  • gold metal clad  approx 10 shts
  • Stihl jumping jack , as new
  •  

GRAVEL ( approx quantities only)

  • 80t of 3/4 crush
  • 60t  of 1/2" crush
  • 30 t of 1 1/4"
  • 10t  of pit run 
  • 75t  of sand , clay, gravel mixture
  • quantity of road stabilizing filter cloth membrane

Miscellaneous

  • 21 concrete cubes ,approx 4000#
  • 6' bin screw anchors
  • grain hoppers
  • frost fighter and heat socks
  • haybine parts, logging and tire chains
  • Coleman 100w solar panel
  • new grader blades
  • concrete mixer
  • scaffolds
  • wood heater
  • steel incl , plate, sq. tubing and more
  • Approx 100 joints of 2 3/8" pipe
  • Large quantity of drill pipe 2 3/8" - 4" ( offsite)
  • used guard rails
  • sucker rod
  • culverts
  • grating
  • visor and grilles for Chevy trucks
  • Cat 3406 parts
  • HD cords
  • 6- 20' swamp mats
  • 6'x 25' grated platform
  • tidy tanks with E pumps , 1000 gal fuel tank
  • 12"x 12" timbers  
  • railway ties
  • texas gates
  • grader wing
  • 3 pt 7' rear blade
  • Backhoe attachment for tractor
  • large quantity of poplar firewood
  • power poles
  • I beams
  • Gravel screener
  • 500 gal propane tank on trailer
  • 500+ gallon square fuel tank c/w e pump
  • 800+ 300 gal poly water tanks
  • scrap steel and quantity of old vehicles
  • 2x4 + 2x6 lumber
  • well site cages

Consigned ph Art 780 975-2745

  • New Holland TR 99 combine,Redekop chopper, Crary big top hopper topper, header grain deflector. 1194 thrashing hrs. 1665 engine hrs.
  • Massey Ferguson 220  22' swather c/w UII pick up . 952 hrs
  • Brandt commander 50' heavy harrows , original owner . 5/8" tines

 

  • 30 kv single phase gen set on trailer c/w tidy tank, 4 cyl diesel​

​

  • The following items are CONSIGNED  Call Peter at 780 656 0353 
  • 2000 Freightliner Pressure washer truck c/w 5.9 cummins 5 spd, showing 99,481 kms c/w devilbis 13 cfm compressor and landa pressure washer c/w 300 gal water tank 
  • Kirchner 12 ft land leveler
  • 3 point post auger c/w  6" and 8" bits

The Following Equipment Is Consigned, Phone Anthony Karpyshyn (780) 614-0353  

MF 220 Series II swather CAHR 22' pickup  reels, 2157 HRS

John Deere 4255 Tractor CAHR 8856 hrs, Quad range, c/w Leon 790 loader & bale forks

John Deere 8200 FWA, CAHR #RW820P002335, 16 spd, 10,741 hrs, 4 hyd's, 70/R38's, 3 point, 1000 P.T.O.c/w Leon 1000 loader, c/w graple & 10' bucket.

John Deere 8650 CAHR #008036, Quad Range, 20.8 R38's, 3 hyds return line, 1000 P.T.O. Recent transmission work.12 blade c/w silage

John Deere 9500 Combine #X631537. 3133 Threshing Hours. Chatt spreader, chopper, 212 pickup.

John Deere R450 CAHR #  C/W JD 995-16' disc bine header. 1026 cutting hours. 480/80R38's.

Hesston Massey 2956A Rd. Baler, 1000 P.T.O. Netwrap.

Morris 1400 Hayhiker #163130

Bourgault 32' Single shoot seeder, Tine Harrows, c/w 3195 Double tank (Hyd drive)

Morris L-320 cultivator c/w 3 bar tines.

Ezee-On 26' Single wing Disc, 22" smooth blade.

Brandt 5000 Grain Vac. 1000 P.T.O. 

Brandt 80' Sprayer c/w 3800 litre poly tank.P.T.O. drive, auto fold.

1898 Mack Tandem 9 spd, c/w Nordic Twin cyl hoist, wood box, 11Rx22.5's. 19,415hrs, Runs Fine.

1995 Merrit Super B Grain trailers, 11xR24.5's. Appears in good condition.

 

001- 1" sockets c/w breaker bar and extensions,Jd plow parts

002- Makita chop saw

003- Rigid pipe vice and tooling

004-Milwakee reciprocating saw with extra blades

005- Rolls of rubbercaulking, carpenter tool belt,tire tube,funnels

006- wiper blades, rust paint,gatch latch,clamps,cut off discs,garage door hrdwre,survey flags,paslode fuel cells

007-spark plug wires,cable cutter,chop saw discs, hedge trimmer, 2 mole traps,welding helmet

008-Gear pullers, JD quick couplers, misc hyd fittings,ram stops,seal beams,driving lights

009-Threaded rod, valve spring compressor,3/4" sockets,36" pipe wrench,bolt cutters, 3 large wrenches up to 2 1/2"

010- boxes of new roller chain, 12 and 20 t bottle jacks, pipe bender

011-3/4" socket set, filter wrenches, fencing pliers

012-Rigid pipe cutters and threaders

013- ATF, 5W20, chain saw oil, 2 cycle oil, blade bolts, break clean, etc

014-Grease, muffler clamps and hangers, filter wrenches,Caterpillar coolant additive,air tool and jack oil,a/c oil, brake fluid

015-water level alarm,chimney elbows, de icer, hyd fittings and elbows, w/w de-icer

016-Ingersol Rand 1" air impact, Jack hammer

017-4 gallons of new 5w30 synthetic oil

018- new Berkely 3/4 hp 220v submersible pump

019- new 1/2 hp , 220 v submersible pump

020- 2 hp 220 v 4" submersible pump

021-1/2hp 220v submersible pump

022-SKC tap and die set

023- 3 gal UFA  10w30

024- 4 hailde bulbs

025- 4 gal winter chain saw chain oil, 4 rolls of centre pull paper towel

026- 9 lt Sae 30 oil,7 gal w/w fluid, plumbing a/f, 4 lt 0w40 synthetic, 1 gal differential fluid

027-1.5 pail 0w20 Cat trans oil, pail of hyd oil, part pail lacquer

028-quant of work gloves, bag of rags

029- 2 motion sensor lights,rolls of caution tape,door pulls, box of electrical,packs of wood screws

030- propane buddy,west coast mirror, carriage bolts,D rings,rope rings,self tapping screws

031- cut of disc 4-7", roll of conduit, asst of 15-60A breakers,hub caps 

032- Backhoe bucket teeth and parts

033- 2 tiger torchs,regulators,lag bolts

034- breaker box,insulators,3-3000w heater elements,2 new septic pump filters

035- Electrical switch boxes, Outdoor switch boxes

036- 4 spill kits

037- 3 oxy/acet hose sets, 1 torch , gauge and regulators

038- REMS 1/8"-2" pipe freezer, air comp. fittings

039- seal beams, convex mirrors,marker lamps,5/6" exhaust flex pipe , CB radio

040- 4 Rolls of discharge hose c/w cam locks

041 - New 50' x 4" discharge hose c/w cam locks and valves

042 - Ford F250/350 oil seal installer

043- 2 poly toolboxes

044- 2- 1/3 hp furnace motors

045- electric dehorners, hard hat

047- tool box latches, bucket teeth,weather striping

048- used Stihl weedeater heads, weed eater line, Rigid tool bag, stihl weedeater harness

049- cold air return vents, louvers,brick mould,J trim,folding chair, insulation

050- 2 new Porta Cable air nailers

051- BBQ replacement burners,NG line, license plate frames, gas regulators

052- new oxy /acet hose set

053- tile saw, overhead door hardware

054- refurbished 4 gal shop vac

055- 15 m string lights , new in box

056- air hose reel, pacer water pump,heat tape, insulation, round bar

057- hyd pumps and valves

058- gas regulators,valves, nipples,sway arms, misc steel

059- sump pump tank

060- Banding machine with tools

061- 3 jack stands( 2 are Westward)

062- Cement trowel with extensions

063- 2 trans oil fillers in antique Texaco and Gulf pails

064- wobble light

065- cutting edge bolts, lug nuts

066- 12" compound mitre saw

067- grade stick

068- Borzit handheld boring tool

069- 5 and 3/4 pails of tractor fluid ( all for one $)

070- 4 pails of 0w40 synthetic oil (all for one $)

071- 7 pails of Shell 15w40 ( all for one $)

072- Makita chop saw

073- Porta cable 150psi air compressor

074-1/6 hp sump pump

075 - Barnes effluent pump

076- 5 partial pails of engine,hyd,trans oil ( all for one $)

077- Barnes effluent pump

078- 1/3 hp sump pump

079- 3-10 jugs of A/F

080- Barnes effluent pump

081 - Berkley sonar tape

082- 2 rolls of discharge hose

083- 4' fg ladder

084- JCB, B+S parts, etc

085- Rigid power threader c/w dies

086-3 Bags of Fescue grass seed

087- 2 pails of 80/90 gear oil

088- 2 oxy/ 3 acet bottles

089- 3 bottle jacks

090- stock doctor,extendable paint roller

091-  3-1# propane bottles, 5# propane tank

092- lift master garage door opener and extra parts

093- Lincoln air transfer pump

094- sand blasting hood

095- 2 used submersible pump motors, 1/2hp pump

096-  3-  1/2 hp pump control boxes

097- 2  - 20' pump switches

098- wheel barrow tire and swivel caster

099-  250 Amp  AC/DC c/w leads and extension cord

100-Tire machinec/w air hose, nozzles and fittings

101- Ingersol Rand 5 hp , 80 gal, 230v upright air compressor

102- Metal Band saw c/w roller and misc steel

103- Honda 3000 watt elec start  inverter

104- vice on block and 1/2 hp bench grinder

105- 3/16 grade 30 chain in drum,various lengths 

106-Westward combination wrench set 1/4"-1+1/4"

107- grinding and cut off discs, tin shears, radio, hitch lock

108- Air straight die grinder,lg elect die grinder, handles

109- Makita elec angle grinder, B+D 3/8 Elect impact,discs and wire wheels

110- Air riveter,Air belt sander,Maximum ext carpet knife, Leister hot air blower, air die grinder

111- Air palm sander,Roto Zip elect Dremel, buffing wheels

112- 3/4" impact sockets, multi plug extension cord

113- Snap On a/c recharge guage and hoses, cords, screen ,gasket material

114- 500 Amp carbon pile load tester

115- shelving hangers, diamond plate, shelf strips

116- 4 drawer organizerc/w rivets,self tapping screws,clips, ties,electrical connectors

117- quan of paint, silicone, waxes, pesticides, hard hats

118- Westward 3/4" 600ft. # torque wrench

119- Mastercraft 4 drawer tool box

120-Stihl SG71 back pack sprayer

121-Mastercraft hole saw kit,Dewalt combo wrench set 10mm-19mm,Mastercraft stubby metric combo wrench set 7mm-19mm

122- Electrical connectors, shrink tubes,Quantity of electrical

123- Drawer c/w trailer lights, bulbs, switches

124- Plastic ties

125- Wiring, roll of 5 strand wiring, lights , etc

126- o-rings,key stock,gromets, washers,clip kit

127- Drawer full of trailer plugs, lights and auto electrical

128- Quantity of drill bits

129 + 130 - Drawers of tire repair supplies/drawer of tapelines

131- auger bit set, bosch blades, nail cutting ship auger

132- Bushing remover, seal driver, vacuum pump

133- Jig saw, 1/2" reversible drill

134- Thompsons water sealer,furniture stripper,paint thinner,shelving boards

135- storage cabinet (new)

136- General International drill press, as new

137- drill vice

138- Thermal Arc 250 amp welder c/w bottle

139- Westward 1/4" - 1/2" drive socket set

140- Bearing driver, organizer, Westward 1/4" 42 piece socket set

141- air angle and straight grinder

142- Westward 250# 1/2" torque wrench,WW 3/8"socket set,WW 80# torque wrench

143-Maximum gear wrench set , 10-19 mm, 5/16-3/4"

144- Blue Point  air grinder, Milwaukee 1/2" hammer drill

145- box of air tools incl. angle drills,die grinders,buffers

146- Westward 14 pc 3/8- 1 1/4" wrenches

147- Hilti hammer drill c/w bits

148- Flaring tool,valve compressors

149-Rigid 18v TSHD sheet metal shear c/w batteries,Rigid 3/8" drill, Rigid Fuego

150- Hach Hydrogen sulfide test kit

151- Mastercraft tap + die (new)

152-Makita disc grinder

153- Air windshield removing kit, 3 pc with knife

154- Westward deadblow hammer, ball peins,puller

155-Dewalt 16 ga nibbler

156-Trailer cord, hose clamps,level,vice grips, chipping hammer

157-2 alum squares,prybar , crowbar,riveter

158- claw hammer,breaker bar, Blue point air chisel

159- Snap on cooling system testwer + socket organizer

160-prybars, trouble lights,extendible mirrors and magnets,ext cords,ear muffs,melt down

161-Caliper,hose clamps,Ezee On ram seal kit, copper kote, soldering items

162-16 drawer rolling tool chest/work bench (green +purple) NEW

163-Alum pipe wrench, crimping tool,tire bar, prybar

164-Pipe wrench, crow/angle bar

165-16 drawer rolling tool chest/work bench(orange/purple) NEW

166- 12 pc asst. combination wrenches, 1 1/16" - 2 1/8"

167- Serpentine belt tool kit

168- pry bar, 3 claw hammers,grinding discs,tool box

169-Bostich and Porter Cable staplers

170- 3 boxes of misc guages, battery clamps,emery cloth, clamps and wire

171-lot of oils,sprayers,cleaners , fire extinguisher

172- acet tip cleaners,pliers,vice grips,flare tool, tin snips

173 -NXA SS 16 drawer loaded tool box including : stubby wrenches,line wrenches,vice grips, chanel locks,nut drivers,screw drivers,crowfoot wrenches, allan keys, torx bits,cresents,chisels,files, punches,rasps,deep sockets,impact sockets,Snap On snap ring set,air fittings,impact driver,WW offset box end wrenches,swivel impacts,hollow punch set,3/8"air impact,Ingersol air rachet

174-Snap On metric tap/die

175- WW 26 pc punch and chisel set

176-Pails of brass fittings, sheet metal screws, peg board hooks,tire studs, bearings

177-Square, ball piens,crow bar

178-Cresents,gear puller,tapeline,chanel locks, ball piens

179- pliers and electrical plugs

180- 4 air grinders

181-Lincoln trans jack

182-Dewalt recipr saw, skil saw,2 drills, chargers, batteries and bag

183- Hyd hose crimper c/w dies and asst of fittings

184-Makita/Superior angle grinders, porta cable nailer

185- Milwaukee battery operated hose cutter

186- 6 air grinders

187- towel dispenser,Fluke voltmeter, soldering wire, pliers, boomers, lights,tape lines

188- Rapid clean parts washer

189-Blue Point grinder and 3 various grinders

190- Westward stub wrenches, gear wrenches

191-5 air tools

192- Sliding hammer puller

193 -Caterpillar spark arrestor

194- Misc boxes of sockets,swivels, rachets,comb. wrenches, hachet

195- M Craft die grinder, burrtefly 3/8" impact

196-Milwaukee camera,M Craft laser thermometer,diag tester,positive power shut off

197- tape lines, Mosquito fogger,12 light, hand plane

198- 4 fire extinguishers

199- JD Hay tester

200- Motomco grain tester c/w scale, therm, and charts 

201- Rolling red tool box

202-Transit tripod and grade stick

203-3 sections of bolt bins c/w contents (Buyers responsibility to removed contentsand detach from wall

204- Shell oil jug, safety vest, binder clips, 12 v wide load lights,level

205 - 100 w  JD Led Flood light (new)

206- Solar booster charger

207- Jonsred 16" chain saw

208- 20 drawer rolling tool chest work bench c/w contents including rachet straps, clamps, bits, screwdrivers, sawblades,respirator,paint supplies, bulbs, hammer,air inflator kit

209- Bucket opener and Luberfiner filter cutting tool

210- gear wrenches 5/16"-1"  + 5/16"- 3/4"

211- 8" 3/4 hp bench grinder

212 - approx 40' heavy rubber air hose

213- Box of hammers and clevises

214- West coast mirror and LED motion light , both new

215- Brooms,squeegy, shovel, sledge hammers

216- Blue rolling parts cart

217- Appliance dolly

218-Snap on reamers

219-Mcraft 1/2" impact, Makita angle and straight grinder

220- Hand tools incl. post augers,shovels,bars, rakes ( in grainery north of garage)

221- Approx 30 50# bags of Bentonite

222- 2 rolls of pipe insulation, jerry cans and pails

223- Insulated tarps, feed bag, part roll of silage tarp

224- 50' x 3/8" hose reel

225-Eskimo Mako 43cc 10"ice auger and 6" hand auger ( both new)

226- 2" high pressure air hose

227- quan of new flat bar, 2"- 6" x 10'

228- quan of slings

229- 35 gal pressure tank in box

230-  drywall lift

231- Stihl jumping jack plate tamper 

232- sewer snake

233- Techumseh push mower

234- tractor chains hanging on south side of barn

235- Pro Slat 8' Aluminum tool organizer rack c/w hooks

236- Peacock Model 60 grasshopper insecticide applicator c/w 5 hp honda engine

237- 4" Honda trash pump

238-3" Honda trash pump

239-4" Honda trash pump

240- new roll of 4' paige wire

241- Alum cased windows/screens, tin siding, ducting

242- Grain crusher c/w endless belt

243- 6" vice

244- Coutts grain crusher

245-6 mole traps and chicken waterers

246- Wood cased windows and red bricks

247 - 2 part rolls of high tensile wire

248- Ritchie water bowl (new)

249- quant. of 3-4" suction and discharge hose c/w cams

250- 5 sections of insulated chimney including T

251- Snapper 3.5 hp  mower with bagger, hasn't been started for 10 trs

252- 11 sheets of Harvest Gold tin sheeting approx 12'

253 - approx 38 pc 2x8"x8'

254- approx 130 pc lumber ( 125-2x4x16' and 5- 2x 8")

255- Small grain hopper

256- approx 25  2x 6"

257- 2 jack hammers

258- approx 57  1x4x16'

259- pile of tote bags and tarps

260- approx 25 wood paned windows

261-approx 20 sheets of used white metal siding ,approx 8'

262-  telepost support, snow rake, gate opener

263- 3 diamond harrows ( north side of grainery)

264- 1 ramp. heavy copper cable, clothes line pole

265- 6-  2x10x12'

266- 2 long stroke cylinders off front end loader

267 - Quan of new insulated chimneysections, couplers, vents, flex ducting,ridge cap

268- Quan of wood cased windows

269- Aurora wood stove(new) c/w access and 2 white vanities

270 - 6 pc of 1x6"x16' and 6 pc 1x12"x 16'

271- 21 sheets of 3/8" OSB,4 sheets veneer,1 sheet plywood, peg board plus part sheets of osb

272-Wood door, bifolds,counter top material

273- 2 sheets of expanded metal, 2x8' sheet of thin metal

274- 2001 VW Golf TD1 diesel, 4dr hatch, std. s/n WVWGF21J5YW449134, has front drivers fender damage. New replacement fender skin including.             kms.

275-  Approx 160 acres  on NE-35-55-14 W of 4th. 150.5 seeded acres into canola this year. Selling with 10% of purchase price down on sale day, 10% due on or before December 1/21, and balance due on or before May 1/22 possession date. Call Allan Antoniuk real estate for further details at 780-895-2442

276- 2012 Terex AL 4000 , 6 KVA light plant, 10098 hrs. s/n AL412-272

277- 2013 Mirage 16' enclosed trailer, 15" t/a, fold down rear door and side exit, s/n 5M3BE1626D1054640

278- CCIL 203 21' double wing chisel plow c/w 3 bar tine harrows

279- IHC #67 8' disc

280 -Brillion 10' grass seeder s/n 158978

281-             Magnum MLT 5080  8 KVA light tower, Kubota power, 15376 hrs. s/n 5AJLS1411CB219333

282-Frost Fighter heater c/w socks

283 -Champion 660 P vibrating sheepfoot packer, cummins power, showing 0050hrs. s/n X101584X

284- 2006  Ingersol Rand XP375 diesel air compressor c/w lines. 7039hrs. s/n 371882UEQA57

285-           Magnum 20KVA  light plant generator, Isuzu diesel.17737hrs. s/n 1313322

286-  9-  8x 14' swamp mats ( so much each times 9)

287 - 11 railway ties ( one money)

288 - 2 sections of 12"x 12" connected timbers

289- quantity of new water and sewer line in reels (3/4"-1 1/2") , weeping tile

290- Approx 40 acres located as South 1/2 of the north 1/2 of SW-12-56-14 W4. Approx 39 acres seeded in canola this year. Terms are 10% due sale day, 10% due on or before December 1/21 , balance due on May 1/22 possession date or sooner. Contact Allan Antoniuk real estate at 780-895-2442 for more info

 

 

 

 

 

 

 

 

Close

Disclaimer


TERMS & CONDITIONS PAYMENT IN FULL SALE DAY - We accept Visa, MC, Debit, Cash & Cheques (If paying by cheque and you are not known by our Auction Staff, you will require a current letter of credit from your Bank guaranteeing Payment to E.P.Auctions). EVERYTHING SELLS AS IS WHERE IS. - All Sales Subject to Additions & Deletions. It is your responsibility to satisfy yourself as to the condition of all Items prior to bidding. You must register with sufficient I.D. (Drivers License) prior to bidding. Absentee and/or Phone Bids are accepted on Items over $3000.00 providing that the Absentee and/or Phone Bid Agreement Form is completed and faxed 48 hours prior to the Auction to Ed Prodaniuk Auctions at 780-473-5750. You will find the Agreement Form at the end of the Photo Section of Each Listing.

Map

Close

Location has been calculated by address and may not be 100% accurate.

Auction Items For Sale

 

FARMLAND   Selling Unreserved

Approx 200 acres

.

  • NE- 35-55-14 w4 approx  160 acres, 150.5 seeded acres.
  • S 1/2 of the north half of SW 12-56-14 w4 approx 40 acres , approx 39 seeded acres         

​Land Sale conditions

10% non refundable deposit down sale day.                                                                                  10% due December 1/2021                                                                                                                balance due prior to May 1/2022 possession date

2020 crop was wheat, 2021 seeded into canola. Real estate Handled by Antoniuk Reality , Contact Allen at 780-895-2442

Industrial

  • JD 644J wheel loader, c/w 9.5' WBM bucket, A/C . 2467 Hrs.at listing. Original owner.  s/n DW644JX608610
  • Degelman 46/57 12' dozer to fit the JD 644J
  • V plow for 644J
  • JD 872D Grader ,14' moldboard, rear 5 shank ripper with aux hyd. 17.5x 25 radials.2738 hrs showing .Original owner. S/N DW872DX613897
  • JD LC 180G Trackhoe c/w toothed bucket , Vg cond. 1396 hrs. Original owner. S/N 521042
  • JD 60" clean up bucket c/w thumb
  • Destec quick tach ripper tooth
  • JD 60" quick tach brush rake.
  • 72" skeleton grapple , new
  • 72" TMG brush cut mower
  • Talet International pipe grapple for skid steer
  • Champion 740A VHP Series 5 grader, 14' moldboard, 13' wing. 17.5x 25 rubber. M11 Cummins power. 11027 hrs. (W/O) s/n X029559X
  • JCB Series 3 214 4 wd extend backhoe , 92" bucket, cb radio, 19.5x 24 rears. 6626 hrs. s/n SLP214TCWO469602
  • Champion 660P Super Pac 7' +/- sheep foot packer c/w front dozer , Cummins power. s/n X101584X
  • 44' x 11.5' Well site power shack/tool crib on 4 skids. Caterpillar 3 phase generator,heater and hyd tank
  • 8 x 34' double skid insulated camp shack. Requires refinishing
  • Ing Rand XP375 light plant ,7040 hrs
  • Terex light plant, 10098 hrs
  • Magnum diesel light plant , 15376 hrs
  • Magnum diesel light plant, 17737 hrs
  • Ing Rand gas compressor
  • Ing Rand gas compressor  (for parts)
  • Tillit 6' 3 pt pto rotary mixer
  • Kuhn HR 3003 10' 3pt rejuvenator, s/n E0177
  • Lowe skid steer post auger
  • Ditch Witch R40 trencher

TRUCKS/CAR

  • 1995 IHC 9400 t/a tractor ,228" wb.11x 24.5 rubber. 5th wheel,wet kit ,product pump,60" sleeper. Last Certified in 2020.Cummins N 14, 18 spd. s/n 2HSFHAER6SC015184
  • 1990 IHC 8100 s/a tractor unit c/w 5th whl,air ride, wet kit,10spd. Cat diesel. 11x 24.5 rubber. Showing 068187km . s/n 1HSHBZJN4MH327088
  • 1977 Ford 9000 t/a gravel truck , 222" wb , rubber suspension, Detroit diesel, 13 spd. 16' Nahani gravel box.425/65r/22.5 frt and 11x 22.5"rear rubber , showing 101,194 km.s/n U90TUY50604
  • 1981 Ford 800 s/a deck truck c/w 5th wheel.28000#gvw. 5+2, 429 gas. 164,557km .s/n 1FDPF82K8FVA38433
  • 1998 Dodge 3500 4 wd, std trans,PTO, gas.c/w 118"deck , live roll and gin poles. s/n 3B6MF3658WM227922
  • 2007 Ford Harley Davidson series quad cab , powerstroke, 4wd, full load, leather, running boards, king pin 5th wheel.275/65/r20 rubber, showing 311,975 km. s/n 1FTWW31P97EB34198
  • 2012 Ford F 250 4wd crew cab , 6.2 l gas. s/n 1FT7W2B68CEB11476
  • 1990 GMC Sierra 2500 2wd service body truck. ext cab., Air. 263759 km, selling c/w large quantity stainless,brass ,galvanized plumbing fittings and adaptors for pumps and pressure systems 
  • 2001 VW GOLF TDI, 4dr hatch. Running. s/n WVWGF21J5YW449134

Trailers and recreation

  • 2016 Deloupe detach scissor neck tridem lowboy, last certified in 2020.11x 22.5" rubber .s/n 2D9EC5338B1004057
  • 2007 Midland 28' SL 2000 End dump gravel trailer , air ride c/w roll tarp.Certified in 2020.s/n 2MFB2R6C17R004397
  • Grain tailgate to fit above trailer
  • 2012 Double A 20' t/a car hauler trailer on 16" rubber, c/w spare.s/n 2DAEC66273CT013445
  • 2013 Mirage 16' enclosed trailer c/w with fold down door.s/n 5M3BE1626D1054640
  • Travelaire 25' gooseneck holiday trailer , 1 slide out,awning, a/c. s/n 2TTTW2521XR990324
  • 16' Fiberglass open bow boat c/w 90hp Merc , tarp and Bryant s/a trailer
  • Seamax Marine 14' Zodiac boat on Karavan s/a trailer s/n YLS4TA92H718
  • Univision approx 36' gooseneck trailer c/w dovetail and flip up ramps , sliding t axle. S/N not clear
  • Approx 50' Movall equip trailer c/w winch . 42' bed +8' gooseneck with 7' dovetail. SOLD AS IS, BUYER RESPONSIBLE TO LOAD
  • Triple axle bumper pull trailer, poor cond, farm use only
  • YAMAHA 25hp outboard motor
  • Minnkota 55# 12v trolling motor
  • Honda 200x trike
  • Honda ATC 110 trike
  • 1989 HONDA Fourtrax 200, 2wd quad, 16809km. 
  • Toro Groundsmaster 72" front mnt mower ( for rebuild or parts)

TRACTORS

  • JD 4040 2wd , 2 hyd and pto c/w 148 FEL ,joystick control,quad shift. 18.4x 38 rubber, showing 0210 hrs. s/n 4040H-006941R
  • Case 2670 4wd, 4 hyd. PTO, 18.4 x 38 duals ,showing 4236 hrs. (fair) s/n 8796711
  • Case 900 diesel, round fender, hyd and pto. 
  • Case 830 diesel , engine is rebuilt but not installed. 0 hrs. on complete overhaul needs to be assembled ( motor is stored dry inside garage)
  • IHC crawler

COMBINE

  • JD 9610 Maximizer , 7 belt pu, straw chopper and Crary chaff spreader. 2483 seperator hours, 3309 engine hrs. s/n X682026
  • JD 925 Straight cut header c/w pu reels. s/n H00925E660934

Tillage, seeding, farm equipment

  • Haybuster 1100 Big Bite tub grinder on 5th wheel trailer, Cat 3406B powered s/n 22-2-29-0051
  • Billion 10' grass seeder, s/n 1529918
  • CCIL 203 21' double wing chisel plow c/w 3 bar mtd harrows. s/n 22963
  • Ezee On 25' double wing disc
  • IHC #67 10' tandem disc 
  • VERTEC 5600 grain dryer plumbed to nat. gas. s/n 56HA034
  • TOX O WIK propane batch (bu) grain dryer
  • TYE , 3pth 5 shank paratill 
  • Schulte 570 trail type rough cut mower,Approx 7' cut .s/n C12090146804
  • Meridian HD 10-46 grain auger c/w 37hp engine and mover. Like new, 1 yr. old. s/n 13000005342
  • Brandt 13 x 70' swing auger, 1000 pto, electric swing, looks real good
  • Brandt 10 x 60 ' swing auger , 540 pto
  • W Field 8 x 61' auger with 10 hp, 3 phase motor and variable drive. VG. s/n 287569
  • W Field 7 x 46' auger c/w 5 hp , 3 phase motor
  • W Field 6 x 36' auger c/w 5 hp , 3 phase motor
  • WF 8X41' pto grain auger
  • SAS 31' grain auger , motor is broken

Grain Bins / Out buildings

  • SUPERIOR 5 ring, 16' dia.hopper bin on double skid c/w aeration tube ,opener and ladder. Only 2 years old
  • GOEBEL 5 ring hopper on double skid sells c/w AGI 10hp, 3ph aeration fan ,OBI temp sensor,opener and ladder
  • Westeel Rosco 14' approx 2600 bu hopper c/w 7.5 hp aeration fan
  • Westeel Rosco 14' 6 ring , approx 2100 bu hopper c/w AGI 7.5hp aeration fan
  • Westeel UFA  6 ring hopper bin on double skid
  • 6- Westeel Rosco 6 ring hoppers on double skids
  • 2 -Westeel Rosco 6 ring 19' hoppers on Stealth 3 skid bases
  • Westeel Rosco 5 ring bin on wooden floor
  • 7' x 10' metal clad job shack
  • 30' metal clad shelter on steel skids
  • 24' shelter on steel skids
  • 53' x 9.5' electrified c can

LIVESTOCK related

  • Ritchie 2 hole water bowl ( new)
  • Freestanding windbreaks 24'- 60'
  • Hi Hog maternity pen
  • panels and gates
  • wind break frames
  • Bale feeder
  • Hoof trimming chute
  • squeeze chute
  • Approx 150 bu wooden creep feeder on wheels
  • Quan of 6'-8' fence posts plus rolls of new barbwire

PLUMBING,HEATING and ELECTRICAL

  • 3 Honda trash pumps, 3" + 4"
  • Quantity of insulated chimney and stove pipes
  • Large quantity of 2"-4" discharge and suction lines
  • Large. quan of PVC fittings
  • Rolls of new 3/4"- 2" poly water line
  • weeping tile
  • well casing
  • drain lines
  • concrete septic tank risers
  • FG septic tanks
  • water hydrants
  • spools of submersible and variuos electrical wiring
  • pump control boxes, foot valves
  • new and used submersible and sump pumps
  • new electrical breakers ,connectors, splices, fuses,switches,shrink tubes
  • submersible pump motors
  • new pressure tank
  • cam locks
  • Large wire crimping tool

SHOP TOOLS 

  • 2 new 17 drawer tool box / work benches on castors
  • 1 new upright storage cabinet
  • 20 drawer work bench
  • Mastercraft 4 dr tool box
  • loaded bolt bins
  • 55ton Carolina hyd press
  • White Industries A/C recovery and recharge station
  • 9hp Honda gas air compressor
  • Hotsy steamer washer
  • Magikist pressure washer
  • Century 250amp AC welder
  • Thermal Arc 250 amp mig welder c/w argon
  • Portable welder on trailer c/w oxy acetylene bottles
  • Honda EU 3000 inverter
  • General International drill press, as new
  • power band saw
  • tire changer
  • trans jack
  • New oxy/acet hose sets with torches and tips, oxy and acet bottles
  • banding machine
  • air hose reels
  • OTC balljoint, pitman arm seperator tool plus more OTC tools
  • larger sandblaster c/w hood and supplies, respirator and paint supplies
  • jack stands, floor jacks, bottle jacks
  • Rigid 25' pipe thawers ( new) and 3 new 12' gutter deicing cable kits
  • transmission filler pails, funnels, mag lights
  • tap and die sets
  • chop saws and mitre saws
  • Rigid threaders and vices
  • gate hinges and latches, fence stretcher
  • brooms, shovels, bars , tie down and rachet straps,rain wear
  • gear wrenches including SAE and metric
  • Snap on battery powered impact wrenches,rachets, nut driver ,grinders c/w with charger, battery and carrying bag
  • OTC diagnostic camera, heat gun,OB2 scanner
  • large quantity of common air tools
  • large quantity of corded tools
  • large quantity of cordless tools
  • pipe and cresent wrenches, pry bars, chisels punches, rasps
  • creeper
  • FG ladders - 5-12'
  • 3-25kg bags of lawn seed and seeders
  • large quant of various oils, sprays, additives
  • bead blaster
  • 2 bags of R20
  • Wobble lamp
  • absorbent spill mats, spill kits, first aid kits
  • gopher getter
  • 48" concrete trowel
  • Stihl weedeaters, Jonsered chain saw
  • Ryobi mitre saw, skil saw, hole saw kit
  • sheet metal screws, various screws, bolts and nails
  • new gloves, rags
  • tarps, straps, hooks, grease nipple set
  • trailer receiver hitches
  • Hammers, picks, impact drivers, impact sockets, punches
  • air fittings and chucks 
  • Snap On snap ring pliers, tap/die,bit extractors
  • fuel line disconnectors, compression tester
  • test lights, multi meters, circuit testers
  • air angle drill
  • Westward 80# and 250# torque wrenches
  • 275# torque amplifier
  • Westward 1/2" socket sets
  • 2 Westward metric wrench sets to 32mm
  • Westward metric flex rachets, impact swivels
  • Milwaukee rechargable cutting tool
  • Hilti hammer drill
  • Stihl back pack sprayer
  • Dewalt and Rigid cordless tools
  • Milwaukee, Makita and Rigid power tools
  • Walter die grinder,angle drill , angle grinder
  • Dewalt cordless recip saw
  • Blue Point air grinder
  • Bearing driverset, Bushing remover tool
  • drill bits, tire patch kit
  • load tester and battery chargers
  • new boat fuel tank
  • soldering gun ,air pop riveter, air sander
  • anvil
  • parts washer, table saw
  • 3 t floor jack
  • Power Fist 3/4hp bench grinder
  • air compressor and air tanks
  • Motomco grain tester and scale
  • gold metal clad  approx 10 shts
  • Stihl jumping jack , as new
  •  

GRAVEL ( approx quantities only)

  • 80t of 3/4 crush
  • 60t  of 1/2" crush
  • 30 t of 1 1/4"
  • 10t  of pit run 
  • 75t  of sand , clay, gravel mixture
  • quantity of road stabilizing filter cloth membrane

Miscellaneous

  • 21 concrete cubes ,approx 4000#
  • 6' bin screw anchors
  • grain hoppers
  • frost fighter and heat socks
  • haybine parts, logging and tire chains
  • Coleman 100w solar panel
  • new grader blades
  • concrete mixer
  • scaffolds
  • wood heater
  • steel incl , plate, sq. tubing and more
  • Approx 100 joints of 2 3/8" pipe
  • Large quantity of drill pipe 2 3/8" - 4" ( offsite)
  • used guard rails
  • sucker rod
  • culverts
  • grating
  • visor and grilles for Chevy trucks
  • Cat 3406 parts
  • HD cords
  • 6- 20' swamp mats
  • 6'x 25' grated platform
  • tidy tanks with E pumps , 1000 gal fuel tank
  • 12"x 12" timbers  
  • railway ties
  • texas gates
  • grader wing
  • 3 pt 7' rear blade
  • Backhoe attachment for tractor
  • large quantity of poplar firewood
  • power poles
  • I beams
  • Gravel screener
  • 500 gal propane tank on trailer
  • 500+ gallon square fuel tank c/w e pump
  • 800+ 300 gal poly water tanks
  • scrap steel and quantity of old vehicles
  • 2x4 + 2x6 lumber
  • well site cages

Consigned ph Art 780 975-2745

  • New Holland TR 99 combine,Redekop chopper, Crary big top hopper topper, header grain deflector. 1194 thrashing hrs. 1665 engine hrs.
  • Massey Ferguson 220  22' swather c/w UII pick up . 952 hrs
  • Brandt commander 50' heavy harrows , original owner . 5/8" tines

 

  • 30 kv single phase gen set on trailer c/w tidy tank, 4 cyl diesel​

​

  • The following items are CONSIGNED  Call Peter at 780 656 0353 
  • 2000 Freightliner Pressure washer truck c/w 5.9 cummins 5 spd, showing 99,481 kms c/w devilbis 13 cfm compressor and landa pressure washer c/w 300 gal water tank 
  • Kirchner 12 ft land leveler
  • 3 point post auger c/w  6" and 8" bits

The Following Equipment Is Consigned, Phone Anthony Karpyshyn (780) 614-0353  

MF 220 Series II swather CAHR 22' pickup  reels, 2157 HRS

John Deere 4255 Tractor CAHR 8856 hrs, Quad range, c/w Leon 790 loader & bale forks

John Deere 8200 FWA, CAHR #RW820P002335, 16 spd, 10,741 hrs, 4 hyd's, 70/R38's, 3 point, 1000 P.T.O.c/w Leon 1000 loader, c/w graple & 10' bucket.

John Deere 8650 CAHR #008036, Quad Range, 20.8 R38's, 3 hyds return line, 1000 P.T.O. Recent transmission work.12 blade c/w silage

John Deere 9500 Combine #X631537. 3133 Threshing Hours. Chatt spreader, chopper, 212 pickup.

John Deere R450 CAHR #  C/W JD 995-16' disc bine header. 1026 cutting hours. 480/80R38's.

Hesston Massey 2956A Rd. Baler, 1000 P.T.O. Netwrap.

Morris 1400 Hayhiker #163130

Bourgault 32' Single shoot seeder, Tine Harrows, c/w 3195 Double tank (Hyd drive)

Morris L-320 cultivator c/w 3 bar tines.

Ezee-On 26' Single wing Disc, 22" smooth blade.

Brandt 5000 Grain Vac. 1000 P.T.O. 

Brandt 80' Sprayer c/w 3800 litre poly tank.P.T.O. drive, auto fold.

1898 Mack Tandem 9 spd, c/w Nordic Twin cyl hoist, wood box, 11Rx22.5's. 19,415hrs, Runs Fine.

1995 Merrit Super B Grain trailers, 11xR24.5's. Appears in good condition.

 

001- 1" sockets c/w breaker bar and extensions,Jd plow parts

002- Makita chop saw

003- Rigid pipe vice and tooling

004-Milwakee reciprocating saw with extra blades

005- Rolls of rubbercaulking, carpenter tool belt,tire tube,funnels

006- wiper blades, rust paint,gatch latch,clamps,cut off discs,garage door hrdwre,survey flags,paslode fuel cells

007-spark plug wires,cable cutter,chop saw discs, hedge trimmer, 2 mole traps,welding helmet

008-Gear pullers, JD quick couplers, misc hyd fittings,ram stops,seal beams,driving lights

009-Threaded rod, valve spring compressor,3/4" sockets,36" pipe wrench,bolt cutters, 3 large wrenches up to 2 1/2"

010- boxes of new roller chain, 12 and 20 t bottle jacks, pipe bender

011-3/4" socket set, filter wrenches, fencing pliers

012-Rigid pipe cutters and threaders

013- ATF, 5W20, chain saw oil, 2 cycle oil, blade bolts, break clean, etc

014-Grease, muffler clamps and hangers, filter wrenches,Caterpillar coolant additive,air tool and jack oil,a/c oil, brake fluid

015-water level alarm,chimney elbows, de icer, hyd fittings and elbows, w/w de-icer

016-Ingersol Rand 1" air impact, Jack hammer

017-4 gallons of new 5w30 synthetic oil

018- new Berkely 3/4 hp 220v submersible pump

019- new 1/2 hp , 220 v submersible pump

020- 2 hp 220 v 4" submersible pump

021-1/2hp 220v submersible pump

022-SKC tap and die set

023- 3 gal UFA  10w30

024- 4 hailde bulbs

025- 4 gal winter chain saw chain oil, 4 rolls of centre pull paper towel

026- 9 lt Sae 30 oil,7 gal w/w fluid, plumbing a/f, 4 lt 0w40 synthetic, 1 gal differential fluid

027-1.5 pail 0w20 Cat trans oil, pail of hyd oil, part pail lacquer

028-quant of work gloves, bag of rags

029- 2 motion sensor lights,rolls of caution tape,door pulls, box of electrical,packs of wood screws

030- propane buddy,west coast mirror, carriage bolts,D rings,rope rings,self tapping screws

031- cut of disc 4-7", roll of conduit, asst of 15-60A breakers,hub caps 

032- Backhoe bucket teeth and parts

033- 2 tiger torchs,regulators,lag bolts

034- breaker box,insulators,3-3000w heater elements,2 new septic pump filters

035- Electrical switch boxes, Outdoor switch boxes

036- 4 spill kits

037- 3 oxy/acet hose sets, 1 torch , gauge and regulators

038- REMS 1/8"-2" pipe freezer, air comp. fittings

039- seal beams, convex mirrors,marker lamps,5/6" exhaust flex pipe , CB radio

040- 4 Rolls of discharge hose c/w cam locks

041 - New 50' x 4" discharge hose c/w cam locks and valves

042 - Ford F250/350 oil seal installer

043- 2 poly toolboxes

044- 2- 1/3 hp furnace motors

045- electric dehorners, hard hat

047- tool box latches, bucket teeth,weather striping

048- used Stihl weedeater heads, weed eater line, Rigid tool bag, stihl weedeater harness

049- cold air return vents, louvers,brick mould,J trim,folding chair, insulation

050- 2 new Porta Cable air nailers

051- BBQ replacement burners,NG line, license plate frames, gas regulators

052- new oxy /acet hose set

053- tile saw, overhead door hardware

054- refurbished 4 gal shop vac

055- 15 m string lights , new in box

056- air hose reel, pacer water pump,heat tape, insulation, round bar

057- hyd pumps and valves

058- gas regulators,valves, nipples,sway arms, misc steel

059- sump pump tank

060- Banding machine with tools

061- 3 jack stands( 2 are Westward)

062- Cement trowel with extensions

063- 2 trans oil fillers in antique Texaco and Gulf pails

064- wobble light

065- cutting edge bolts, lug nuts

066- 12" compound mitre saw

067- grade stick

068- Borzit handheld boring tool

069- 5 and 3/4 pails of tractor fluid ( all for one $)

070- 4 pails of 0w40 synthetic oil (all for one $)

071- 7 pails of Shell 15w40 ( all for one $)

072- Makita chop saw

073- Porta cable 150psi air compressor

074-1/6 hp sump pump

075 - Barnes effluent pump

076- 5 partial pails of engine,hyd,trans oil ( all for one $)

077- Barnes effluent pump

078- 1/3 hp sump pump

079- 3-10 jugs of A/F

080- Barnes effluent pump

081 - Berkley sonar tape

082- 2 rolls of discharge hose

083- 4' fg ladder

084- JCB, B+S parts, etc

085- Rigid power threader c/w dies

086-3 Bags of Fescue grass seed

087- 2 pails of 80/90 gear oil

088- 2 oxy/ 3 acet bottles

089- 3 bottle jacks

090- stock doctor,extendable paint roller

091-  3-1# propane bottles, 5# propane tank

092- lift master garage door opener and extra parts

093- Lincoln air transfer pump

094- sand blasting hood

095- 2 used submersible pump motors, 1/2hp pump

096-  3-  1/2 hp pump control boxes

097- 2  - 20' pump switches

098- wheel barrow tire and swivel caster

099-  250 Amp  AC/DC c/w leads and extension cord

100-Tire machinec/w air hose, nozzles and fittings

101- Ingersol Rand 5 hp , 80 gal, 230v upright air compressor

102- Metal Band saw c/w roller and misc steel

103- Honda 3000 watt elec start  inverter

104- vice on block and 1/2 hp bench grinder

105- 3/16 grade 30 chain in drum,various lengths 

106-Westward combination wrench set 1/4"-1+1/4"

107- grinding and cut off discs, tin shears, radio, hitch lock

108- Air straight die grinder,lg elect die grinder, handles

109- Makita elec angle grinder, B+D 3/8 Elect impact,discs and wire wheels

110- Air riveter,Air belt sander,Maximum ext carpet knife, Leister hot air blower, air die grinder

111- Air palm sander,Roto Zip elect Dremel, buffing wheels

112- 3/4" impact sockets, multi plug extension cord

113- Snap On a/c recharge guage and hoses, cords, screen ,gasket material

114- 500 Amp carbon pile load tester

115- shelving hangers, diamond plate, shelf strips

116- 4 drawer organizerc/w rivets,self tapping screws,clips, ties,electrical connectors

117- quan of paint, silicone, waxes, pesticides, hard hats

118- Westward 3/4" 600ft. # torque wrench

119- Mastercraft 4 drawer tool box

120-Stihl SG71 back pack sprayer

121-Mastercraft hole saw kit,Dewalt combo wrench set 10mm-19mm,Mastercraft stubby metric combo wrench set 7mm-19mm

122- Electrical connectors, shrink tubes,Quantity of electrical

123- Drawer c/w trailer lights, bulbs, switches

124- Plastic ties

125- Wiring, roll of 5 strand wiring, lights , etc

126- o-rings,key stock,gromets, washers,clip kit

127- Drawer full of trailer plugs, lights and auto electrical

128- Quantity of drill bits

129 + 130 - Drawers of tire repair supplies/drawer of tapelines

131- auger bit set, bosch blades, nail cutting ship auger

132- Bushing remover, seal driver, vacuum pump

133- Jig saw, 1/2" reversible drill

134- Thompsons water sealer,furniture stripper,paint thinner,shelving boards

135- storage cabinet (new)

136- General International drill press, as new

137- drill vice

138- Thermal Arc 250 amp welder c/w bottle

139- Westward 1/4" - 1/2" drive socket set

140- Bearing driver, organizer, Westward 1/4" 42 piece socket set

141- air angle and straight grinder

142- Westward 250# 1/2" torque wrench,WW 3/8"socket set,WW 80# torque wrench

143-Maximum gear wrench set , 10-19 mm, 5/16-3/4"

144- Blue Point  air grinder, Milwaukee 1/2" hammer drill

145- box of air tools incl. angle drills,die grinders,buffers

146- Westward 14 pc 3/8- 1 1/4" wrenches

147- Hilti hammer drill c/w bits

148- Flaring tool,valve compressors

149-Rigid 18v TSHD sheet metal shear c/w batteries,Rigid 3/8" drill, Rigid Fuego

150- Hach Hydrogen sulfide test kit

151- Mastercraft tap + die (new)

152-Makita disc grinder

153- Air windshield removing kit, 3 pc with knife

154- Westward deadblow hammer, ball peins,puller

155-Dewalt 16 ga nibbler

156-Trailer cord, hose clamps,level,vice grips, chipping hammer

157-2 alum squares,prybar , crowbar,riveter

158- claw hammer,breaker bar, Blue point air chisel

159- Snap on cooling system testwer + socket organizer

160-prybars, trouble lights,extendible mirrors and magnets,ext cords,ear muffs,melt down

161-Caliper,hose clamps,Ezee On ram seal kit, copper kote, soldering items

162-16 drawer rolling tool chest/work bench (green +purple) NEW

163-Alum pipe wrench, crimping tool,tire bar, prybar

164-Pipe wrench, crow/angle bar

165-16 drawer rolling tool chest/work bench(orange/purple) NEW

166- 12 pc asst. combination wrenches, 1 1/16" - 2 1/8"

167- Serpentine belt tool kit

168- pry bar, 3 claw hammers,grinding discs,tool box

169-Bostich and Porter Cable staplers

170- 3 boxes of misc guages, battery clamps,emery cloth, clamps and wire

171-lot of oils,sprayers,cleaners , fire extinguisher

172- acet tip cleaners,pliers,vice grips,flare tool, tin snips

173 -NXA SS 16 drawer loaded tool box including : stubby wrenches,line wrenches,vice grips, chanel locks,nut drivers,screw drivers,crowfoot wrenches, allan keys, torx bits,cresents,chisels,files, punches,rasps,deep sockets,impact sockets,Snap On snap ring set,air fittings,impact driver,WW offset box end wrenches,swivel impacts,hollow punch set,3/8"air impact,Ingersol air rachet

174-Snap On metric tap/die

175- WW 26 pc punch and chisel set

176-Pails of brass fittings, sheet metal screws, peg board hooks,tire studs, bearings

177-Square, ball piens,crow bar

178-Cresents,gear puller,tapeline,chanel locks, ball piens

179- pliers and electrical plugs

180- 4 air grinders

181-Lincoln trans jack

182-Dewalt recipr saw, skil saw,2 drills, chargers, batteries and bag

183- Hyd hose crimper c/w dies and asst of fittings

184-Makita/Superior angle grinders, porta cable nailer

185- Milwaukee battery operated hose cutter

186- 6 air grinders

187- towel dispenser,Fluke voltmeter, soldering wire, pliers, boomers, lights,tape lines

188- Rapid clean parts washer

189-Blue Point grinder and 3 various grinders

190- Westward stub wrenches, gear wrenches

191-5 air tools

192- Sliding hammer puller

193 -Caterpillar spark arrestor

194- Misc boxes of sockets,swivels, rachets,comb. wrenches, hachet

195- M Craft die grinder, burrtefly 3/8" impact

196-Milwaukee camera,M Craft laser thermometer,diag tester,positive power shut off

197- tape lines, Mosquito fogger,12 light, hand plane

198- 4 fire extinguishers

199- JD Hay tester

200- Motomco grain tester c/w scale, therm, and charts 

201- Rolling red tool box

202-Transit tripod and grade stick

203-3 sections of bolt bins c/w contents (Buyers responsibility to removed contentsand detach from wall

204- Shell oil jug, safety vest, binder clips, 12 v wide load lights,level

205 - 100 w  JD Led Flood light (new)

206- Solar booster charger

207- Jonsred 16" chain saw

208- 20 drawer rolling tool chest work bench c/w contents including rachet straps, clamps, bits, screwdrivers, sawblades,respirator,paint supplies, bulbs, hammer,air inflator kit

209- Bucket opener and Luberfiner filter cutting tool

210- gear wrenches 5/16"-1"  + 5/16"- 3/4"

211- 8" 3/4 hp bench grinder

212 - approx 40' heavy rubber air hose

213- Box of hammers and clevises

214- West coast mirror and LED motion light , both new

215- Brooms,squeegy, shovel, sledge hammers

216- Blue rolling parts cart

217- Appliance dolly

218-Snap on reamers

219-Mcraft 1/2" impact, Makita angle and straight grinder

220- Hand tools incl. post augers,shovels,bars, rakes ( in grainery north of garage)

221- Approx 30 50# bags of Bentonite

222- 2 rolls of pipe insulation, jerry cans and pails

223- Insulated tarps, feed bag, part roll of silage tarp

224- 50' x 3/8" hose reel

225-Eskimo Mako 43cc 10"ice auger and 6" hand auger ( both new)

226- 2" high pressure air hose

227- quan of new flat bar, 2"- 6" x 10'

228- quan of slings

229- 35 gal pressure tank in box

230-  drywall lift

231- Stihl jumping jack plate tamper 

232- sewer snake

233- Techumseh push mower

234- tractor chains hanging on south side of barn

235- Pro Slat 8' Aluminum tool organizer rack c/w hooks

236- Peacock Model 60 grasshopper insecticide applicator c/w 5 hp honda engine

237- 4" Honda trash pump

238-3" Honda trash pump

239-4" Honda trash pump

240- new roll of 4' paige wire

241- Alum cased windows/screens, tin siding, ducting

242- Grain crusher c/w endless belt

243- 6" vice

244- Coutts grain crusher

245-6 mole traps and chicken waterers

246- Wood cased windows and red bricks

247 - 2 part rolls of high tensile wire

248- Ritchie water bowl (new)

249- quant. of 3-4" suction and discharge hose c/w cams

250- 5 sections of insulated chimney including T

251- Snapper 3.5 hp  mower with bagger, hasn't been started for 10 trs

252- 11 sheets of Harvest Gold tin sheeting approx 12'

253 - approx 38 pc 2x8"x8'

254- approx 130 pc lumber ( 125-2x4x16' and 5- 2x 8")

255- Small grain hopper

256- approx 25  2x 6"

257- 2 jack hammers

258- approx 57  1x4x16'

259- pile of tote bags and tarps

260- approx 25 wood paned windows

261-approx 20 sheets of used white metal siding ,approx 8'

262-  telepost support, snow rake, gate opener

263- 3 diamond harrows ( north side of grainery)

264- 1 ramp. heavy copper cable, clothes line pole

265- 6-  2x10x12'

266- 2 long stroke cylinders off front end loader

267 - Quan of new insulated chimneysections, couplers, vents, flex ducting,ridge cap

268- Quan of wood cased windows

269- Aurora wood stove(new) c/w access and 2 white vanities

270 - 6 pc of 1x6"x16' and 6 pc 1x12"x 16'

271- 21 sheets of 3/8" OSB,4 sheets veneer,1 sheet plywood, peg board plus part sheets of osb

272-Wood door, bifolds,counter top material

273- 2 sheets of expanded metal, 2x8' sheet of thin metal

274- 2001 VW Golf TD1 diesel, 4dr hatch, std. s/n WVWGF21J5YW449134, has front drivers fender damage. New replacement fender skin including.             kms.

275-  Approx 160 acres  on NE-35-55-14 W of 4th. 150.5 seeded acres into canola this year. Selling with 10% of purchase price down on sale day, 10% due on or before December 1/21, and balance due on or before May 1/22 possession date. Call Allan Antoniuk real estate for further details at 780-895-2442

276- 2012 Terex AL 4000 , 6 KVA light plant, 10098 hrs. s/n AL412-272

277- 2013 Mirage 16' enclosed trailer, 15" t/a, fold down rear door and side exit, s/n 5M3BE1626D1054640

278- CCIL 203 21' double wing chisel plow c/w 3 bar tine harrows

279- IHC #67 8' disc

280 -Brillion 10' grass seeder s/n 158978

281-             Magnum MLT 5080  8 KVA light tower, Kubota power, 15376 hrs. s/n 5AJLS1411CB219333

282-Frost Fighter heater c/w socks

283 -Champion 660 P vibrating sheepfoot packer, cummins power, showing 0050hrs. s/n X101584X

284- 2006  Ingersol Rand XP375 diesel air compressor c/w lines. 7039hrs. s/n 371882UEQA57

285-           Magnum 20KVA  light plant generator, Isuzu diesel.17737hrs. s/n 1313322

286-  9-  8x 14' swamp mats ( so much each times 9)

287 - 11 railway ties ( one money)

288 - 2 sections of 12"x 12" connected timbers

289- quantity of new water and sewer line in reels (3/4"-1 1/2") , weeping tile

290- Approx 40 acres located as South 1/2 of the north 1/2 of SW-12-56-14 W4. Approx 39 acres seeded in canola this year. Terms are 10% due sale day, 10% due on or before December 1/21 , balance due on May 1/22 possession date or sooner. Contact Allan Antoniuk real estate at 780-895-2442 for more info