Auction Items For Sale
COMMERCIAL/INDUSTRIAL PROPERTY * SECURITY FENCED LOT * METAL BUILDING * COLLECTOR CARS * METAL LATHES * NEW ELECTRIC MOTORS * AIR BOAT * TRAILERS * EARTH MOVER * MOWER * SPECIALTY ITEMS
SATURDAY APRIL 28TH 2018 10:00AM
AUCTION LOCATION: 2316 N. 11TH STREET ENID, OK. (Corner of Willow & 11th Street)
Real Estate sells at 10:00am
This Commercial property is conveniently located on the north side of Enid, Oklahoma with great access and frontage on East Willow Street. It is located in the Willow Road Commercial Park and usable for Urban Commercial/Industrial use. The property is improved with a nice metal fabricated building that is comprised of approximately 6,656 sq. Ft. The building has office space in the front of the building that has 2 offices, large open lobby area, 2 bathrooms, large conference room and central heat/air. The remaining portion of the shop building is open with (2) overhead heaters, insulated, lighted, metal lined walls, single phase electric, (2)-14’ overhead doors, (1) – 12’ overhead door, and (2) walk-in doors. The yard (.957 acres) is graveled and security fenced. This is an excellent located with Willow frontage and great access! For more information or appointment to view contact Bill Beebe 580-554-6347
Legal Description: Lots (1-4) Block (2), Willow Rd Commercial Park Enid, Garfield County, Oklahoma
Taxes: $2,128.00 Possession: will be given at closing
Terms: 10% of the total purchase price is to be placed in escrow the day of the auction with the balance being due upon delivery of marketable title. All inspections must be completed prior to bidding on the property.
PERSONAL PROPERTY TO SELL FOLLOWING REAL ESTATE
Collector Cars: 1930 Ford Model A Coupe all originally restored, rumble seat, luggage rack, runs great, good title and tag; 1932 Chevy Coupe 350 engine, 350 turbo trans, air condition, bucket seats, 15,083 miles, runs great, good title and tag; 1930 Chevrolet 4 dr. Sedan new engine, very clean, very nice all around, rund great, good title and tag
Trucks/Air Boat/Trailers/ATV: 2012 Alumitech 18' Air Boat, 355 Chevy eng, 4 blade Composite prop, MSD ignition, Ram-Lin Galvanized trailer, 2" ball hitch, ST205/75R14, 5 lug, good title and tad runs great; 2007 Forrest River Enclosed Car hauler 25/16 ball hitch, rear ramp door, side door, 7,000lb tandem axle, 225/75R15, 24'x8.5" good title/tag; 2003 Ford F-350 Club Cab truck Cannonball dump/bale bed, 99,000 miles, 7.3 diesel, 4x4, power, runs great, new batteris, new Michelin 235/85R18 rubber, runs great; Polaris Big Boss 500 cc 6x6 ATV Liquid Four Stroke, new battery, runs good; 1984 Honda 3 wheeler, 110 cc runs good; Shop Built Forklift Trailer, No Title 54"x8' with 44" dove tail, ramps, LT235/85R16, 8 lug wheel, tandem axle; 1969 Ford F650 Dump Truck runs good; Bumper Pull 16' Stock Trailer Full cover; Honda Rubicon ATV Four Wheeler
Metal Lathes: Goodway model GW 1440 metal lathe 3ph, 5 hp, steady rest, 3 jaw chuck, works good; South Bend CL 117C metal lathe 16'x36", 3ph, 3hp, 3 jaw chuck, Collett Assembly, works good; South Bend Fourteen, metal lathe gear head, 14"x30", 3ph, steady rest, 3 jaw chuck, works good; South Bend CL8145 metal lathe 13" bed, taper attachment, 2-face plates, works good; LeBlond metal lathe 17'x80", 4 jaw, steady & follow rest, live center, face plate, taper attachment, works good;
Electric Motors/ Misc. Items: New 2" Molasses pump, 1hp, 3ph, Durion Mark III;
Reliance Electric Motor, new in crate 3ph, 2hp, with 83.58-1 inline reducer; New Siemens Electric Motor 20hp, 460 volt, 1780 RPM; New Baldor Electric Motor 10hp, 3ph, 460 volt 3475 RPM; New Siemens Electric Motor 25hp, 3ph, 3525 RPM, 460 volt; New Siemens Electric Motor 7.5hp, 3ph, 460 volt; New Rebuilt U.S. Motor, Electric Motor 100 hp, 3ph, 1780 RPM, 230/460 volt; New Siemens Electric Motor new in crate, 20hp, 3ph, 2535 RPM, 230/460 volt; New Baldor Electric Motor 60hp, 3ph, 3560 RPM, 460 volt; New Siemens Electric Motor 40hp, 3525 RPM, 3ph, 460 volt; New Siemens Electric Motor 30hp, 3ph, 3525 RPM, 460 volt; New Reliance Electric Motor 30hp, 3ph, 1765 RPM, 460 volt; New Siemens Electric Motor 30hp, 3ph, 1775 RPM, 460 volt;
New General Electric Motor 50hp, 3ph, 1185 RPM, 460 volt; New Rebuilt Toshiba Electric Motor 50hp, 3ph, 3535 RPM, 460 volt; New Siemens Electric Motor new in crate, 5hp, 3ph, 3600 RPM, 230/460 volt; Unused Rebuilt U.S. Motor, Electric 3ph, 2300 volts, 3565 RPM, 150HP; New Westinghouse Electric Motor 200hp, 3ph, 1780 RPM, 2300/4160 volt; Used Reliance Electric Motor 40hp, 3ph, Ingersoll Rand hydraulic oil pump and cooler; Used Baldor Electric Motor 7.5HP, hydraulic pump assembly; Hydraulic Drive Swivel assembly New; used horizontal air compressor 10hp, 3ph, 3 cylinder v twinn, 220/440 volt, 1735 RPM; Budgit Electric Hoist, 2 ton; Used Marathon Electric Motor 75hp, 3ph, 1775 RPM, 230/460 volt, good motor; Used Marathon Electric Motor 75hp, 3ph, 1775 RPM, 230/460 volt, good motor; Gardner Denver Model 4518 Duraflow Vacuum pump, good condition, runs; Gardner Denver Model 4518 Duraflow Vacuum pump, good condition, runs; Used Marathon Electric Motor 40hp, 3ph, 1765 RPM, good motor; Gardner Denver Duraflow Vacuum pump, good condition, runs; Kinney model KNBD720 Vaccum Pump w/Baldor 5hp, 3ph, 3450 RPM electric motor, good condition;
New Winsmith Speed Reducer New in crate, 1.5hp, 3ph, with 12x12 blower, used to push feed and grain; New Buddy Box Gear Reducer 60-1 ratio, auger drive, new
New Shimpo Circulate inline gear reducer 59-1, new; Dodge model SCXT115 Gear Reducer with auger adapter assembly, pallet of (7); 2- John Blue Co. model NGP8055 Liquid pumps new; New John Blue Co. model LN49555 Liquid pumps ; Rhino 15' Batwind Mower, New front gear box, recent blades, very good condition; Built Tough by Rowe Dirt Scraper Pull type, 8' box, 12.5L-16SL implement tires, good condition; Lots of new thermos couplers; 4” suction hose; hyd cylinders; lots of new electric motors (1 & 3 phase); metal chairs w/swing up desk; lots of new short haul modems; lots of new Pvc fittings; hand tools; lots of new Kohler engine parts; pallet of small hard wheels; lots of new items purchased in bulk; several new electric timers; pendle hitches; lots of spark plugs; Wells BM metal band saw 110 volt; Victor Model 2400 pattern torch; Warner & Swasey #4 Turret lathe3ph, 3 jaw, tool holder; Pincor Model 16 pto driven generator 110/240 volt; Detroit truck motor 3 cylinder diesel, radiator, air cleaner, muffler, runs good; Peerless Reciprocating saw runs; Buffalo drill press, runs; Rockwell Delta 9" table saw, works good; HomeCraft table saw; Jet JJ-6ES jointer; Dayton model 3E232D heater used one season, works good, natural gas; DeWalt 12" radial arm saw 220 volt, works; 2-New Job Box tool box never used; Chelsea Power Take Off, new in box fits Mack truck, model 823XEDAX-A5X5, with air shifter kit; Chelsea Power Take Off, new in box fits Mack truck, model 823XEDAX-A5X5, with air shifter kit; Chelsea Power Take Off, new in box fits Mack truck, model 823XEDAX-A5X5, with air shifter kit; Chelsea Power Take Off, new in box fits Mack truck, model 823XEDAX-A5X5, with air shifter kit; Chelsea Power Take Off, new in box fits Mack truck, model 823XEDAX-A5X5, with air shifter kit; Chelsea Power Take Off, new in box fits Mack truck, model 823XEDAX-A5X5, with air shifter kit; pallet of Muncie Power Take Off & parts new and used, 12 ptos plus parts; Starrett 20"-24" Micormeter Caliper; Starrett 12"-16" Micrometer Caliper; Starret 12"-16" Micrometer Caliper; Brown & Sharpe misc gages and indicators; DoAll Taper-Mike w/extra micrometers; Inside Micrometer & Calipers; Box of misc. lathe tooling; Box of Boice gages ant torque wrenches; Boice mod. 26 gages, Tumico Micrometer 1 small set and 1 large set; 3-boxes of CV axle gages; Box of Vernier Diameter tape gages; 3-new air respirators masks; Pallet Crate of 4 bolt hub assemblies new; Pallet of Refrigerant Valves; Pallet of Aluminum 3&4" connections; 2-Box of Aluminum Caps & Plugs; Pallet Crate of Tank Truck Valves; Pallet of Truck Brake parts; Pallet of Car Parts, Carbs, Bearings, Rings; Pallet of Water Hoses; Pallet of Air Filters & Misc Items; Pillow Block Bearings (8); Box of Air Dryer & Hydraulic Filters; Box of Ignition Cables & Wire Sets; 15 Boxes of 4" Bonney Forge weld elbows; 2-Barrel wheel dollies; 3-Box of Regulators; Pallet of Misc. Cable; (10) Large Hooks; Truck Rolling Tail Board Mounts; Misc Mufflers; 6-Box of Tooling; (2) Antique Car Axle Stands; Box of Electric Boxes and Connections; Large Box of Tooling; Control Panel; New 12" Rotary Roof Vent in box; New Hydraulic Oil Cooler/Heat Exchanger; (6) Air Drive Diaphram Pumps; Chemetron AC/DC 250 Tig Welder; Spoolmatic 200 amp tig gun; Pallet Crate 3 & 4" Pvc Fittings; Pallet Crate 8" Pvc Fittings; Pallet Crate 8" Pvc Fittings; Crate of 2" & smaller Pvc Fittings; (3) Eye Bolts & (8) larg Turn Buckles; (15) 4" Steel Connections; (2) Boxes of Weld Pipe Fittings; Crate of Weld Pipe Fittings; Crate of Misc. Electric Wire; Four Wheeler tree cutter; Crate of Plastic Fans & Misc; Pallet of Truck Rims; Pallet of Ball Bearings, Never Used Boxes got destroyed, couldn't sell as NEW; Hydraulic Pump on roller hand pump for a press; Pallet of Hydraulic Cylinders (11) all good condition; Pallet of Hydraulic Cylinders (13) all good condition; Pallet of Hydraulic Cylinders (18) all good condition; Pallet of Mufflers; John Deere H.D. Hitch & Safety Chain New; Pallet of Great Plains Drill Parts New; Great Plains Variable Speed Reducer good condition; Great Plains Variable Speed Reducer good condition; Tractor PTO Drive Pump good condition; Tractor PTO Speed Increaser good condition; New 2005 Radiator Specialties model A-326018, 24"x31"; Sand Blast Unit good condition; Parker Model 150-M-1953C-GR1VG-B79 3,000 max pressure, Pneumatic Actuator, good condition; Atlas 200 amp are welder, 1 phase; Braden MS20-18B Winch Good Bull Gear, good condition; Hydraulic Winch off a Gallion Crane works good; (2) Air Brake Trailer axles, 11-22.5 rubber; (3) Oil Tans good condition; Pallet of 9 Bud Truck Rims good condition; Caterpillar Forklift hard tire, 41" forks, gas engine, runs;
Auctioneers Note: Lippard Auctioneers, Inc. is pleased to offer this very nice commercial building, collector cars and equipment at public auction. Real Estate will sell at 10:00AM followed by the metal lathes, motors, etc. Collector Cars, trailers, larger equipment will sell at 11:30 AM. For more information log on to www.lippardauctions.com to view photo’s. For questions on any items being sold contact Mr. Bill Beebe at 580-554-6347
Internet Bidding: will be available on equipment by logging to www.lippardauctions.com to register. Neither the auction company nor the seller is responsible in the event of loss of signal by either side.
Terms/Conditions on Personal Property: Cash, Check, Visa, MasterCard, Discover, American Express. There will be a 2.5% convenience fee added to all credit card purchases. All information has been taken from sources believed reliable; however, no guarantee is being made by the auction company or the seller. Buyers should satisfy themselves as to any inspections prior to bidding. Any announcements made the day of the auction supersede all advertising.
SELLER: W.D. “BILL” BEEBE