Global Auction Guide

CLOSING-OUT AUCTION FOR REYDEN SERVICE

ARBORG, MANITOBA

THURSDAY, AUGUST 24th ? 9AM

(18kms North on hwy 326)

AUCTIONEERS NOTE: After 21 years of custom fabrication and production of high-quality livestock equipment; Dennis has decided to sell all remaining inventory as well as his excellent selection of shop equipment and tools to the highest bidder.  Plan to attend this quality auction sale with something for everyone!

WELDERS:

* (2) Lincoln Invertec V350 Pro Multiprocess Mig/Stick/Pulse welders c/w Lincoln LN-7 2-roll GMA control wire feed modules (late-model electronic units)

* Lincoln PowerMig 255 w/digital readout

* (3) MillerMatic 250 CV/DC wire feed gas welders

* Miller Dialarc 250 AC/DC welder c/w cables, etc

* Miller Spoolmatic 1 gun (for welding aluminium)

SHOP EQUIPMENT:

* 1999 Accurpress 130 ton 12? CNC press break model 713012 c/w 99 setting programmable control module, 575 volt, 3ph, 120 control volts, 4000 psi oil pressure s/n 5477 (bought new, has had little use)

* 1986 HACO 10? shear type TS-306, 550v, 3050 x 6 cap., s/n 801153 (extra set of blades go with it) (Sweden)

* Piranha 50 ton cap. Ironworker c/w Tooling & Dies, 600v, 3ph, s/n P3-2612

* Cincinnati model 3MI horizontal milling machine with 34? bed travel, 17? bed vertical, 8? HD vise, 575 volt, 3ph, s/n 2J3P5D-31

* Hyd-Mech S-20 horizontal metal cutting bandsaw 220v, 60hz, 1ph, 2hp, 83 fla., s/n 21180433

* Reyden built automatic 3-wheel plate roller w/6? bed, reversible, auto. setting (3/16 cap)

* Reyden built 1? x 1? square Tubing Bender (fully automatic)

* Model 210 45-ton Punch Press s/n 3-236, 575v motor & switch, 3ph

* Hypotherm PowerMax 300 Plasma cutter with cart (5/8 or 3/4? plate cap.)

* 1992 Trademaster PB-15201 4? belt / 6? disk sander, 115v, 1ph

* Delta 70-200C HD floor model drill press, 120v, 1ph, s/n R9719

* Magnaforce upright shop compressor

* Powerfist bandsaw

* Hyd. Porta-power

* Cutoff saw

* Electric welding tilt turntable (turns 360 degrees)

* Phasor Rotophase CC3 phase convertor: phase input 15hp ? 230v, 56 line amps, 60hz, 286 LR amps / 3 phase output max single motor 15hp, 45hp system rating, 600v, 48.3 amps s/n 3-7832 (was using up until 3ph power recently supplied)

* 14? Ryobi cutoff saw type 3 on stand, s/n 003077

* Power Fist tube bender

* Twist turning machine for wrought iron jobs (twists spindles for stairs, railings, etc)

* Electric/hydraulic lifting Jig for making leaf cutter bee shelters

* Jigs to make Corral Panels

* Welding jig w/12v motor

TOOLS, DIES & TOOLING:

* Fromm Model A337 seal-less strapping tool (no seals needed, saves $)

* 3/4? steel Banding unit on cart

* Good selection of Dies for Iron Workers and Punch Presses

* Extra punches & dies for the 12? Break

* Lots of Assorted tooling for milling machines, etc

* Large selection of tooling stock: threader & tapping heads, taps, dies, etc

* ATA model BH12 rotary table dividing head

* Excellent seat punch assortment

* C-frame punches

* Selection of new Milling cutters

* Lots of End Mills

* Reamers

* Keyway stock

* Arbours

* Milling blocks

* Large selection of drill bits (all sizes)

* Selection of pullers

* Asst?d Precision Tools: callipers, etc

* Shop Tools: Hammers, grease guns, wrenches, air hoses, chucks, levels, socket sets, etc

* Good sockets: deeps, impacts, etc

* Air Tools

* DeWalt grinders

* Makita drills

* Selection of shop Clamps

* Bolt cutters

* Wire wheels

* Hacksaw

* Air tool oilers

5^TH WHEEL TRAILER:

* 35? Lone Star HD Gooseneck 10 ton cap. flatdeck trailer w/10,000lb tandem dual axles, new rubber

FORKLIFT & MATERIAL HANDLING:

* Cat V50DSA propane 5000 lb. Cap. Forklift w/side-shift, 11? lift, 10,862 hrs, s/n 4BC465

* (2) Vulcan chain hoists c/w trolleys (only 1yr old)

* Beams, electric chain hoists & trolleys

* 15? tall H.D. hoist frame

* Fork extensions

* Pallet jack

* H.D. carts

PAINT BOOTH & SUPPLIES:

* Binks 26? x 14? Industrial paint booth fully lighted

* Respirator / ventilation system ? pump provides fresh air from outside to the wearer

* Airless paint sprayer

* Paints & painting supplies

* Chemical coating paints

STEEL INVENTORY: (large supply on hand)

* Cold shaft, Superior shaft, hex shaft, etc

* Selection of sheets, expended mesh & steel plates up to 1?

* Tube steel: Seamless, etc

* Piping, channel, angle, beams, drill stem, flighting, etc

* Good selection of Keystock (up to 1 1/2?)

* Quantity of pre-cut pieces to make trailers & cattle equipment

CABINETS, SHELVING, RACKS, STANDS, ETC:

* Several deluxe H.D. Tooling cabinets (some on wheels)

* Large 9-shelf HD steel sheeting & plate rack

* Selection of HD Steel inventory racks (freestanding, wall-mounted, etc)

* Pallet racking unit

* (5) double sided island display shelf units w/single sided unit on the end (pegboard backing)

* (5) single sided island display units (against the wall, pegboard backing)

* H.D. shelving units

* Roller tables, welding tables & stands

* Approx. 50 steel tote crates (stackable)

* Drying racks

VENTILATION, SHIELDS & SAFETY EQUIPMENT:

* Large portable shop ventilation fan on wheels

* U.A.S. ?Smoke Hog? electronic shop filter

* Thermo-King electronic smoke eater

* Welding Equipment: Solar auto helmets, visors, gloves, etc

* Welding curtains (some on frames)

* Aluminum tracks for welding curtains

* Fans

NEW STORE MERCHANDISE:

* (4) H.D. rotating bolt bins ? (2 sold loaded with bolt selections, 2 sold empty)

* Lots of drill bits (large ones also)

* End mills, taps, tapers, chucks, threaders, reamers

* Large selection of Nuts & bolts: also screws, nails, fencing staples, etc

* Good Stock of new chains (some in crates): up to 3/8?, grade 70 transport, etc (assorted sizes)

* Rope assortment, display & cutter

* Trailer jacks & couplers, floor jacks

* Tractor seat, Spindles & hubs, sprockets, bearings, locksets

* Roller chains, Hose clamps, Chain links, hooks, Draw pins, V-belts, lights

* Threaded rods, Welding rods, Cutoff disks & chop saw parts

* Tractor trans. oil, Antifreeze & more

OFFICE & LUNCHROOM:

* Computer system

* Possibly office supplies: 2 ? double pedestal metal desks, chairs, etc

* Possibly Lunchroom items

HARDWARE, AG/AUTO PARTS & MISC:

* Caravan 10?x10? instant canvas shed

* Cement mixer w/electric motor

* 8? Bucket (fits Allied? Loader)

* 3pt hitch bale spinner w/hyd motor

* Ring assortments, electrical, etc

* Dandy applicator for sileage powder

* Station stall for hogs

* Hyd. Controls, valves & fittings

* PTO shafts, U-joints, etc

* Lots of pulleys

* Baler bands

* Approx. 50 new Implement rims

* Selection of welding rods

* H.D. extension cords, cables, trouble lights, etc

* Construction heaters

* Assorted tin

* Rebar

* Hyd & Aircraft cylinders

* Galvanized ductwork

* Electric hoist (AS IS)

* Fuel tank

* Grain truck hoist

* (2) 1 ton truck axles

* Ladders

* Spare electric motors

* Tank heaters

* Plumbing fittings

--------------------------------------------------------------------------------------------------------------------------------------

SECTION 2 - REYDEN BUILT NEW MERCHANDISE

NOTE: As of sale day, these quantities may not be the same as stated ? there will be at least one of each unit listed below for sure in this auction.

NEW SHELTERS & UTILITY TRAILERS:

* (2) Biotech shelters (1 is 30? x 66?, 1 is 30? x 42?): feature 2? square tubing frames, 12 oz. Tarp (great for livestock, grain, hay or machinery storage)

* 24? x 24? steel building ? tinned (2 sections bolt together, makes good garage)

* 12? x 24? steel shelter ? tinned, closed on both ends

* (3) single axle utility tilting trailers 50? x 97? x 12? box w/tailgates, lights, etc

* (3) tandem axle walking beam ATV utility trailers w/36 cu. Ft. boxes, 2000lb cap.

NEW LIVESTOCK HANDLING EQUIPMENT:

* (2) H.D. Cattle Handling system c/w squeeze chute, palpation, alleyway, crowding tub & more

* (2) H.D. Squeeze chutes c/w head catch, palpation cage, etc

* (5) Crowding tubs

* 8? Alley section (adjustable)

* (2) 12? loading chutes on wheels w/wooden floors, gates front & back

* (6) Maternity pens 8.5? x 11?

* (10) Economy headgates

* New galvanized hog farrowing crate

* Eklund Drive-thru swing gate

* Lick tubs, etc

FEEDERS & BALE FORKS:

* 50 bushel 3pt. Hitch hopper feeder w/flip-up 6? unload auger, 2 see-thru windows

* (4) Quick-attach bale forks (fit Alo loaders)

* (7) Quick-attach bale forks (fit JD 640 or 740 loaders)

* (4) HD 3pt. Hitch bale forks

* Tempered steel bale spikes

* (11) 10? bunk feeders

* (50) 4? hanging feeders

* (20) 2? hanging feeders

* (16) Skirted round bale feeders

* (36) regular round bale feeders

* (13) Tombstone rd. bale feeders

PANELS & GATES (each panel is 6-bar)

* (10) 30? H.D. free standing windbreak panels

* (4) H.D. Double hinge 5-bar gates (1 1/2? square tubing)

* (1) 16? 6-bar corral panel

* (2) 24? 6-bar corral panels

* (6) 4? gates

* (6) 6? gates

* (44) 8? panels

* (19) 8? gates

* (69) 10? panels

* (9) 12? panels

* (31) 12? gates

* (16) 14? gates

* (5) 16? panels

* (13) 16? gates

* (14) 10? feeder panels

* (6) 10? creep panels

* (12) 4? loop gates

* (11) 12? panels w/walk-thru gate

* (4) 8? panels w/walk-thru gate

* (9) 10? panels w/walk-thru gate

* (1) 8? panel w/walk-thru gate

Not responsible for errors in description. Subject to additions or deletions.

Property owner and Fraser Auction Service not responsible for accidents occurring on sale site.  GST & PST where applicable.  TERMS: Cash or cheque with bank letter of credit or proper I.D.  Sale conducted by FRASER AUCTION SERVICE 1-800-483-5856 www.fraserauction.com